Thanks, Leon. I am just starting assembly now. 6" ought to be OK. If
not, I'll pull out the Praxi.
On 1/5/2012 1:34 PM, Leon wrote:
> On 1/5/2012 11:44 AM, Gramp's shop wrote:
>> On 1/5/2012 6:47 AM, Leon wrote:
>>> On 1/4/2012 6:19 PM, Gramp's shop wrote:
>>>> A CL find for me -- brand new Super 12 with VRS kit for $280. Happy
>>>> dovetails to me, happy dovetails to me :-)
>>>>
>>>> Larry
>>>
>>> Have you bought it yet???
>>
>>
>> Yup ... should have it tomorrow. I thought I shopped it pretty
>> thoroughly. No?
>
> Size might be an issue. If you use variable spacing tails and pins you
> are going to be limited to a 6" long joint if you want both sides of a
> drawer/whatever to look the same. Basically you use both sides of the
> jig. If you use symmetrical spacing this will not be an issue.
On 1/5/2012 6:47 AM, Leon wrote:
> On 1/4/2012 6:19 PM, Gramp's shop wrote:
>> A CL find for me -- brand new Super 12 with VRS kit for $280. Happy
>> dovetails to me, happy dovetails to me :-)
>>
>> Larry
>
> Have you bought it yet???
Yup ... should have it tomorrow. I thought I shopped it pretty
thoroughly. No?
On 1/5/2012 11:44 AM, Gramp's shop wrote:
> On 1/5/2012 6:47 AM, Leon wrote:
>> On 1/4/2012 6:19 PM, Gramp's shop wrote:
>>> A CL find for me -- brand new Super 12 with VRS kit for $280. Happy
>>> dovetails to me, happy dovetails to me :-)
>>>
>>> Larry
>>
>> Have you bought it yet???
>
>
> Yup ... should have it tomorrow. I thought I shopped it pretty
> thoroughly. No?
Size might be an issue. If you use variable spacing tails and pins you
are going to be limited to a 6" long joint if you want both sides of a
drawer/whatever to look the same. Basically you use both sides of the
jig. If you use symmetrical spacing this will not be an issue.
On 1/6/2012 2:29 PM, Leon wrote:
> On 1/6/2012 2:17 PM, Gramp's shop wrote:
>> Thanks, Leon. I am just starting assembly now. 6" ought to be OK. If
>> not, I'll pull out the Praxi.
>
> Give us a report!
Set up complete, but missing the 8mm collet reducer. Nutz. Hoping
local Woodcraft or Rockler has one, otherwise will need to wait for
Leigh to open on Monday.
Bought a nice piece of zebrawood for a little box project to break it in.