I=92m working with General Finishes Arm-r-seal oil & urethane topcoat
and I=92d like to add some Transtint and use as a toner. The piece is
already finished but my sister wants it darker. I mixed some up by
first dissolving the dye in 4 parts acetone before adding to the poly
and it looks fine on my samples. I plan on applying with a brush.
Does anyone have experience mixing Transtint with oil-based poly?
Thanks
-Scott
On Jul 4, 1:57=A0pm, onoahimahi <[email protected]> wrote:
> I=92m working with General Finishes Arm-r-seal oil & urethane topcoat
> and I=92d like to add some Transtint and use as a toner. The piece is
> already finished but my sister wants it darker. I mixed some up by
> first dissolving the dye in 4 parts acetone before adding to the poly
> and it looks fine on my samples. I plan on applying with a brush.
>
> Does anyone have experience mixing Transtint with oil-based poly?
>
> Thanks
> -Scott
I've used it in linseed oil with no problems. In fact I was using a
recipe by jeff Jewett himself...
On Jul 4, 2:57=A0pm, onoahimahi <[email protected]> wrote:
> I=92m working with General Finishes Arm-r-seal oil & urethane topcoat
> and I=92d like to add some Transtint and use as a toner. The piece is
> already finished but my sister wants it darker. I mixed some up by
> first dissolving the dye in 4 parts acetone before adding to the poly
> and it looks fine on my samples. I plan on applying with a brush.
>
> Does anyone have experience mixing Transtint with oil-based poly?
>
> Thanks
> -Scott
Transtint dyes are WATER based dyes. Meaning they are water soluble
(also alcohol soluble).
Oil based poly dissolves oil based solutes, not water based solutes.
"[email protected]" <[email protected]> wrote in news:e22fcc9f-
[email protected]:
<snip>
>
> I read more and more, and have actually seen (as in with my own eyes)
> Transtint fade in normal light from a window. <snip>
I did a table with Transtint dyed poplar legs and apron and a light maple
top with a water-based poly finish. It has been sitting between a window
and a french door for four years. The top has shown color changes from the
light, but the dyed portion still looks rich and full of color. This may be
because it is dyed black. I also have a rich blue dyed stool that I turned
out of poplar that has been outside on the front porch for 2 years. It is
finished with spar varnish for the UV filtering. Again, there has been no
appreciable change, but it is on the north side getting no direct sunlight.
I know they do warn about fading, but so far I've been pleased.
Jerry
I think my concern with be more with the Transtint product itself than
its ability to mix.
I read more and more, and have actually seen (as in with my own eyes)
Transtint fade in normal light from a window. The fading was noticed
when a lamp was moved to clean the table top, and it there was a
perfect, darker circle under the lamp position. Ouch. This happened
in a sunny window, but it only took a year.
If you are using this on an outdoor project, you won't have nearly
that long to enjoy your tint color.
Robert