I'm setting up a DC in my home workshop according to a booklet from the tool
shop. (using PVC pipe).
I understand how I have to run a bare wire from each machine thru to the DC
unit, but what about the Floor Sweep? It has no machine to connect to.
Does it need a wire? And also, I have one station that I have set up for
multiple machines (one at a time). What about the times when I have NO
machine connected...this becomes same situation as the Floor Sweep.
Any help from people who have actually setup one of these systems is much
appreciated.
Dave Hinz wrote:
> On Thu, 15 Sep 2005 19:25:59 GMT, BillyBob <[email protected]> wrote:
> >
> > "TomWoodman" <[email protected]> wrote in message
> > news:[email protected]...
> >
> >> I understand how I have to run a bare wire from each machine thru to the
> > DC
> >> unit, but what about the Floor Sweep? \
> >
> > OH NO, you re-opened debate #421 in rec.woodworking.
>
> Didn't we _just_ do that?
*Cough**Cough**Cough**Cough*
What is dust collection for?????
*Cough**Cough**Cough**Cough**Cough**Cough**Cough**Cough**Cough**Cough**Cough**Cough*
On Thu, 15 Sep 2005 08:05:31 -0700, "TomWoodman"
<[email protected]> wrote:
>I'm setting up a DC in my home workshop according to a booklet from the tool
>shop. (using PVC pipe).
>I understand how I have to run a bare wire from each machine thru to the DC
>unit, but what about the Floor Sweep? It has no machine to connect to.
>Does it need a wire? And also, I have one station that I have set up for
>multiple machines (one at a time). What about the times when I have NO
>machine connected...this becomes same situation as the Floor Sweep.
>
>Any help from people who have actually setup one of these systems is much
>appreciated.
>
make sure the wire is big enough guage. 8 guage stranded should do it.
attach an aligator clip to one end. clip this to your balls. the other
end gets inserted into the wall socket.
read the real scoop here:
<http://mywebpages.comcast.net/rodec/woodworking/articles/DC_myths.html>
On Thu, 15 Sep 2005 19:25:59 GMT, BillyBob <[email protected]> wrote:
>
> "TomWoodman" <[email protected]> wrote in message
> news:[email protected]...
>
>> I understand how I have to run a bare wire from each machine thru to the
> DC
>> unit, but what about the Floor Sweep? \
>
> OH NO, you re-opened debate #421 in rec.woodworking.
Didn't we _just_ do that?
ROTFLMAO - damn, now I have to clean tea off my keyboard.
P.S. your article on DC is very well done.
Gary in KC
<[email protected]> wrote in message
news:[email protected]...
>
> make sure the wire is big enough guage. 8 guage stranded should do it.
> attach an aligator clip to one end. clip this to your balls. the other
> end gets inserted into the wall socket.
>
> read the real scoop here:
> <http://mywebpages.comcast.net/rodec/woodworking/articles/DC_myths.html>
"TomWoodman" <[email protected]> wrote in message
news:[email protected]...
> I understand how I have to run a bare wire from each machine thru to the
DC
> unit, but what about the Floor Sweep? \
OH NO, you re-opened debate #421 in rec.woodworking. Within two days you
will be swamped with replies. Exactly 49% of the replies will tell you that
you will blow yourself up from static electricity. The other 49% will tell
its all BS. The last 2 % will just make obnoxious noises, write expletives
and yell at you for bringing this up. My recommendation: flip a coin.
I've been running PVC without wires year round for two years and I'm still
here. Maybe I need a bigger table saw to generate more static electricity.
Bob
On Thu, 15 Sep 2005 08:05:31 -0700, "TomWoodman"
<[email protected]> wrote:
>I'm setting up a DC in my home workshop according to a booklet from the tool
>shop. (using PVC pipe).
>I understand how I have to run a bare wire from each machine thru to the DC
>unit, but what about the Floor Sweep? It has no machine to connect to.
>Does it need a wire? And also, I have one station that I have set up for
>multiple machines (one at a time). What about the times when I have NO
>machine connected...this becomes same situation as the Floor Sweep.
>
>Any help from people who have actually setup one of these systems is much
>appreciated.
Zzzzzzzzzzzzzzzzzz plop. (crickets chirping)
grrrgrrrrgrrrrgrrrrgrrrrgrrrr
Zzzzzzzzzzzzzzzzzz plop. (crickets chirping)
grrrgrrrrgrrrrgrrrrgrrrrgrrrr
Zzzzzzzzzzzzzzzzzz plop.
Just hang in there. Someone will bite in just a bit.
--
LRod
Master Woodbutcher and seasoned termite
Shamelessly whoring my website since 1999
http://www.woodbutcher.net
Proud participant of rec.woodworking since February, 1997
Thanks, Dr. Cole
I had not seen this article previously. Thanks for the work to gather
information and write it up; it is very good. I am a physical chemist who
worked on a program at the Naval Research Laboratory to use high energy
electric discharge (plasma arc torch) for destruction of waste on ships.
The waste is about 60% paper, plus other organic matter (food, plastic,
clothing, etc.) and some inorganic stuff like cans and miscellaneous. We
fed material from a hopper through plastic tubing into a chamber, through
the plasma discharge where it was heated to over 10,000 degrees F in a few
milliseconds. For varying ways of grinding the feed (the simulated waste),
varying feed rates, and other experimental conditions, we measured the
extent of destruction and analyzed the products. In other words, we were
pretty much trying to create the kind of event of a DC explosion. This
experience convinces me there are many other things to worry about instead,
an explosion in a DC system is very unlikely, and not going to release
enough energy to do significant damage.
Your article does describe a couple scenarios that should get attention.
Namely,
1. Shock hazard due static charge buildup on insulating ductwork.
2. Fire hazard in the dust pile.
If woodworkers properly deal with these issues, as your article discusses,
they should be able to move on to other, much more dangerous, concerns.
I hope your article will be widely disseminated and read, and that we can
put this non-issue to bed for good. However, I won't hold my breath.
Steven Peterson, Ph.D.
"Gary A in KC" <[email protected]> wrote in message
news:[email protected]...
> ROTFLMAO - damn, now I have to clean tea off my keyboard.
>
> P.S. your article on DC is very well done.
>
> Gary in KC
>
>
> <[email protected]> wrote in message
> news:[email protected]...
>
>>
>> make sure the wire is big enough guage. 8 guage stranded should do it.
>> attach an aligator clip to one end. clip this to your balls. the other
>> end gets inserted into the wall socket.
>>
>> read the real scoop here:
>> <http://mywebpages.comcast.net/rodec/woodworking/articles/DC_myths.html>
>
>