I finally got around to making a router table for the Incra Jig I bought a
while ago.
I knew before that the dust collection on the fence side is pretty much
nill.
Just curious if anyone has done any mods to it to allow for dust collection?
Thanks,
Rob
You can reply to me at
r_b_v at v_e_r_z_e_r_a doht c_o_m
(remove the _ to get the address)
"Rob V" <[email protected]> wrote in message
news:[email protected]...
> I finally got around to making a router table for the Incra Jig I bought a
> while ago.
> I knew before that the dust collection on the fence side is pretty much
> nill.
>
> Just curious if anyone has done any mods to it to allow for dust
collection?
The most elegant mod I've seen is at this link:
http://home.pacbell.net/jdismuk/routertable.html. I don't agree with the
effort he put into the split fences - HDPE is too expensive, IMHO. I think
MDF sacrificial would be more appropriate, but the implementation is well
done.
Bob
Exactly what I was looking for - thanks for the link.
"BillyBob" <[email protected]> wrote in message
news:I8%[email protected]...
>
> "Rob V" <[email protected]> wrote in message
> news:[email protected]...
>> I finally got around to making a router table for the Incra Jig I bought
>> a
>> while ago.
>> I knew before that the dust collection on the fence side is pretty much
>> nill.
>>
>> Just curious if anyone has done any mods to it to allow for dust
> collection?
>
> The most elegant mod I've seen is at this link:
> http://home.pacbell.net/jdismuk/routertable.html. I don't agree with the
> effort he put into the split fences - HDPE is too expensive, IMHO. I
> think
> MDF sacrificial would be more appropriate, but the implementation is well
> done.
>
> Bob
>
>
Rob V wrote:
> I finally got around to making a router table for the Incra Jig I bought a
> while ago.
> I knew before that the dust collection on the fence side is pretty much
> nill.
>
> Just curious if anyone has done any mods to it to allow for dust collection?
>
>
> Thanks,
> Rob
>
> You can reply to me at
> r_b_v at v_e_r_z_e_r_a doht c_o_m
> (remove the _ to get the address)
>
>
Rob:
Don't have a picture, but I have the ultra on my router table as well. I
Y'd the 2.25" tubes, sent one to the dust collector fence and one to the
underside of the router table (a la the pictures at:
http://home.pacbell.net/jdismuk/routertable.html). My router table is
effectively the one Norm built.
I do pretty well with dust collection except when doing MDF which always
dusts the place up a bit.
~Mark.