Hu

HerHusband

13/09/2004 2:44 PM

WIDE cut sliding miter saws?

I'm curious if anyone makes a sliding miter saw that can crosscut a panel
up to 24" wide? Sort of a miniature panel saw?

All of the sliding miter saws I have seen have been limited to 12" cuts
regardless of whether they use 8", 10", or 12" blades?

Anthony


This topic has 3 replies

mm

"mp"

in reply to HerHusband on 13/09/2004 2:44 PM

13/09/2004 8:35 AM

> I'm curious if anyone makes a sliding miter saw that can crosscut a panel
> up to 24" wide? Sort of a miniature panel saw?

Look for radial arm saws.

Sw

"SwampBug"

in reply to HerHusband on 13/09/2004 2:44 PM

13/09/2004 11:47 AM

http://www.omgainc.com/omga_RADIAL_Series.htm

--=20
SwampBug
- - - - - - - - - - - -


"HerHusband" <unknown@unknown.com> wrote in message =
news:Xns95634EBFD3377herhusband@216.168.3.50...
I'm curious if anyone makes a sliding miter saw that can crosscut a =
panel=20
up to 24" wide? Sort of a miniature panel saw?

All of the sliding miter saws I have seen have been limited to 12" cuts=20
regardless of whether they use 8", 10", or 12" blades?

Anthony

km

kwoodhands@netzero.com (mike)

in reply to HerHusband on 13/09/2004 2:44 PM

13/09/2004 9:40 PM

HerHusband <unknown@unknown.com> wrote in message news:<Xns95634EBFD3377herhusband@216.168.3.50>...
> I'm curious if anyone makes a sliding miter saw that can crosscut a panel
> up to 24" wide? Sort of a miniature panel saw?
>
> All of the sliding miter saws I have seen have been limited to 12" cuts
> regardless of whether they use 8", 10", or 12" blades?
>
> Anthony

The first slide saws were made by Delta,they crosscut up to 24" if I
recall. They were called Delta Saw Buck. I haven't seen a new one in
years, probably stopped making them.They worked pretty well, I had to
check often for squareness to the fence. They were a bit touchy to set
up and keep accurate. The saw I used was used for everything, sort of
abused. I imagine if one was used for trim work only, you would get
better results.

mike


You’ve reached the end of replies