Hi,
Please take a look at this fragment:
http://freeboundaries.com/NiceFinish.jpg
How does one achieve a finish like that? I imaging this piece is
stained, but I am not asking about that part. The feature that I'm
trying achieve, but have never been able to, is let the texture of
wood to show through the finish. I'm not talking about the grain, but
rather the subtle roughness that one feels when touching the wood.
That said, the grain seems to show through a little bit as well, which
is nice. Finally, there is this warm (almost creamy) feel.
I'm guessing that one of the keys is that there is a very thin layer
of finish. But even when I tried that with wipe-on type finishes, I
always get something that looks and feels a little filmy and
plasticky.
Many thanks in advance,
Aaron
Aaron Fude wrote:
> Hi,
>
> Please take a look at this fragment:
>
> http://freeboundaries.com/NiceFinish.jpg
>
> How does one achieve a finish like that? I imaging this piece is
> stained, but I am not asking about that part. The feature that I'm
> trying achieve, but have never been able to, is let the texture of
> wood to show through the finish. I'm not talking about the grain, but
> rather the subtle roughness that one feels when touching the wood.
> That said, the grain seems to show through a little bit as well, which
> is nice. Finally, there is this warm (almost creamy) feel.
>
> I'm guessing that one of the keys is that there is a very thin layer
> of finish. But even when I tried that with wipe-on type finishes, I
> always get something that looks and feels a little filmy and
> plasticky.
Based on the very small photo, I can guess it might be a sprayed
lacquer, which is then rubbed down to a duller sheen, or a well-applied
Danish Oil finish.
On Apr 4, 6:46=A0am, B A R R Y <[email protected]> wrote:
> Aaron Fude wrote:
> > Hi,
>
> > Please take a look at this fragment:
>
> >http://freeboundaries.com/NiceFinish.jpg
>
> > How does one achieve a finish like that? I imaging this piece is
> > stained, but I am not asking about that part. The feature that I'm
> > trying achieve, but have never been able to, is let the texture of
> > wood to show through the finish. I'm not talking about the grain, but
> > rather the subtle roughness that one feels when touching the wood.
> > That said, the grain seems to show through a little bit as well, which
> > is nice. Finally, there is this warm (almost creamy) feel.
>
> > I'm guessing that one of the keys is that there is a very thin layer
> > of finish. But even when I tried that with wipe-on type finishes, I
> > always get something that looks and feels a little filmy and
> > plasticky.
>
> Based on the very small photo, I can guess it might be a sprayed
> lacquer, which is then rubbed down to a duller sheen, or a well-applied
> Danish Oil finish.- Hide quoted text -
>
> - Show quoted text -
What would you use for the rubdown?
Aaron Fude <[email protected]> writes:
>Hi,
>
>Please take a look at this fragment:
>
>http://freeboundaries.com/NiceFinish.jpg
>
>I'm guessing that one of the keys is that there is a very thin layer
>of finish. But even when I tried that with wipe-on type finishes, I
>always get something that looks and feels a little filmy and
>plasticky.
I've had good results on cherry with a 33/33/33 mix of spar,
(tung|blo), turps.
Many of the "filmy" or "plasticky" finishes can be rubbed out
using various rubbing compounds to get a 'silkier' finish.
scott
While you "can" get a satin look as you see on that piece by rubbing
down lacquer, you will likely also have a very smooth finish and loose
the wood "feel".
I think what you are looking for is an oil finish. Tung or Boiled
Linseed Oil (BLO). You build it up with many coats. It It is not very
protective. It will start to "build" and actually does plasticize or
polymerize (my made up terms) as poly finishes are just oils with
certain plasticizres. You can also try some custom formulas by mixing
in some film finish varnish or shellac but that style will quickly
build to to tick and loose the wood feel.
Look on google for a "hand rubbed oil finish" formula and technique
that uses a mixture of BLO and Turpentine or Mineral Spirits and
succesive wiped on coats. You will get what you are looking for. If
you apply enough coasts it will start to gloss up but fewe coats give
a nice natural look. Here is a nice example
http://awoodenbox.com/db2/00179/awoodenbox.com/_uimages/a-Urn1_02copy.jpg
(make sure to look at it at full size).
On Apr 3, 10:50=A0pm, Aaron Fude <[email protected]> wrote:
> Hi,
>
> Please take a look at this fragment:
>
> http://freeboundaries.com/NiceFinish.jpg
>
> How does one achieve a finish like that? I imaging this piece is
> stained, but I am not asking about that part. The feature that I'm
> trying achieve, but have never been able to, is let the texture of
> wood to show through the finish. I'm not talking about the grain, but
> rather the subtle roughness that one feels when touching the wood.
> That said, the grain seems to show through a little bit as well, which
> is nice. Finally, there is this warm (almost creamy) feel.
>
> I'm guessing that one of the keys is that there is a very thin layer
> of finish. But even when I tried that with wipe-on type finishes, I
> always get something that looks and feels a little filmy and
> plasticky.
>
> Many thanks in advance,
>
> Aaron
"Aaron Fude" wrote \
> I'm guessing that one of the keys is that there is a very thin layer
> of finish. But even when I tried that with wipe-on type finishes, I
> always get something that looks and feels a little filmy and
> plasticky.
Impossible to tell from the photo, but a rubbed oil/poly finish, a la Sam
Maloof, will get you close to what can be seen.
Many of the methods on this site will get you similar results:
http://thewoodshop.20m.com/finishing.htm
--
www.e-woodshop.net
Last update: 3/8/08
KarlC@ (the obvious)