On Feb 20, 1:59 pm, "splinter" <[email protected]> wrote:
> I recently bought the 3 1/2 hp router for a router table. I cant seem
> to find the "above the table adjustment tool" anywhere.... does any
> body know of a place where to buy this and other triton accecories?
Where did you buy the router? Have you contacted them yet?
Have you checked Triton's website? They list a number for the USA/
Canada Customer Service Hotline: 1-888-TRITON1 [874-8661] .
On 21 Feb 2007 10:53:58 -0800, "splinter" <[email protected]> wrote:
>after checking their website the "through table winder" is an option
>only for the 2 1/2 hp model....Doug and kevin win the prize....thanks
>for the help.
You aren't missing anything. I have the smaller one and never use the
winder. You gotta reach under to lock/unlock the lock lever anyway,
may as well adjust the height while you're at it.
-Leuf
On 20 Feb 2007 10:59:00 -0800, "splinter" <[email protected]> wrote:
>I recently bought the 3 1/2 hp router for a router table. I cant seem
>to find the "above the table adjustment tool" anywhere.... does any
>body know of a place where to buy this and other triton accecories?
It is not an accessory it is a function of the machine. Works like a
dream. If you cannot figure it out read the instructions and start
from basics. It is there. Are you sure the safety cover on the switch
is closed?
******
eat the samoosa to reply
"splinter" <[email protected]> wrote in message
news:[email protected]...
> after checking their website the "through table winder" is an option
> only for the 2 1/2 hp model....Doug and kevin win the prize....thanks
> for the help.
>
A hint here, mount the router so that the fine tune knob is on the front
right side when mounted in the table. The coarse knob will be on the right
side also.
This leaves the speed control on the back side but you can get around that
with a mirror. The switch will be on the left back side which is not a
problem either once you get the feel of the door and switch.
On 20/02/2007 1:59 PM, splinter wrote:
> I recently bought the 3 1/2 hp router for a router table. I cant seem
> to find the "above the table adjustment tool" anywhere.... does any
> body know of a place where to buy this and other triton accecories?
I thought the above-table adjustment was only on the smaller Triton model.
On 21/02/2007 10:13 AM, Leon wrote:
> "Phil Hansen" <[email protected]> wrote in message
> news:[email protected]...
>> On 20 Feb 2007 10:59:00 -0800, "splinter" <[email protected]> wrote:
>>
>>> I recently bought the 3 1/2 hp router for a router table. I cant seem
>>> to find the "above the table adjustment tool" anywhere.... does any
>>> body know of a place where to buy this and other triton accecories?
>> It is not an accessory it is a function of the machine. Works like a
>> dream. If you cannot figure it out read the instructions and start
>> from basics. It is there. Are you sure the safety cover on the switch
>> is closed?
>
>
> My Triton 3.5 does not have an ABOVE adjustment, only below.
I wonder if Phil is referring to the ability to change the bit above the
table, as opposed to the through-the-table winder available on the
smaller one.
confirmed...above table adjustment is only on the 2 1/2HP model. I own both
models.
K.
"Doug Payne" <[email protected]> wrote in message
news:[email protected]...
> On 20/02/2007 1:59 PM, splinter wrote:
>> I recently bought the 3 1/2 hp router for a router table. I cant seem
>> to find the "above the table adjustment tool" anywhere.... does any
>> body know of a place where to buy this and other triton accecories?
>
> I thought the above-table adjustment was only on the smaller Triton model.
On Tue, 20 Feb 2007 20:40:21 -0500, "Kevin B"
<[email protected]> wrote:
>confirmed...above table adjustment is only on the 2 1/2HP model. I own both
>models.
It works fine on my 3 1/2 hp model. Maybe read the instructions again.
You are missing something. Are you sure the safety cover on the switch
is closed?
>"Doug Payne" <[email protected]> wrote in message
>news:[email protected]...
>> On 20/02/2007 1:59 PM, splinter wrote:
>>> I recently bought the 3 1/2 hp router for a router table. I cant seem
>>> to find the "above the table adjustment tool" anywhere.... does any
>>> body know of a place where to buy this and other triton accecories?
>>
>> I thought the above-table adjustment was only on the smaller Triton model.
>
******
eat the samoosa to reply
On Wed, 21 Feb 2007 12:20:20 -0500, Doug Payne
<[email protected]> wrote:
>On 21/02/2007 10:13 AM, Leon wrote:
>> My Triton 3.5 does not have an ABOVE adjustment, only below.
>
>I wonder if Phil is referring to the ability to change the bit above the
>table, as opposed to the through-the-table winder available on the
>smaller one.
Been away so hence the delay in replying. I misunderstood the original
post. Doug got it right. Sorry for the confusion and misinformation.
******
eat the samoosa to reply
"Phil Hansen" <[email protected]> wrote in message
news:[email protected]...
> On 20 Feb 2007 10:59:00 -0800, "splinter" <[email protected]> wrote:
>
>>I recently bought the 3 1/2 hp router for a router table. I cant seem
>>to find the "above the table adjustment tool" anywhere.... does any
>>body know of a place where to buy this and other triton accecories?
>
> It is not an accessory it is a function of the machine. Works like a
> dream. If you cannot figure it out read the instructions and start
> from basics. It is there. Are you sure the safety cover on the switch
> is closed?
My Triton 3.5 does not have an ABOVE adjustment, only below.