Highland Hardware sells them and I think Lee Valley and Mc Feeley's sell
them.
"am" <[email protected]> wrote in message
news:[email protected]...
> Does the group have any experience of screwdriver bit holder that can be
> used in a Stanley Yankee 131B spiral screwdriver. A friend had made one
> for
> his 130 out of a standard magnetic holder but the 131 requires a thicker
> shaft than the standard 1/4 inch bit holder has.
> Thanks in advance.
>
>
On Sat, 26 Feb 2005 10:10:40 GMT, the inscrutable "am"
<[email protected]> spake:
>Does the group have any experience of screwdriver bit holder that can be
>used in a Stanley Yankee 131B spiral screwdriver. A friend had made one for
>his 130 out of a standard magnetic holder but the 131 requires a thicker
>shaft than the standard 1/4 inch bit holder has.
>Thanks in advance.
3 tips:
Do you have a welder? Weld a 1/4" 6-point socket or magnetic hex drive
shank onto an existing bit that has been filed or ground down.
Or grind a 1/4" square end on a Yankee bit. That would allow you to
use any size socket as a nut driver.
Or spend $18 here:
http://pages.tias.com/8600/InventoryPage/1536862/1.html
---
- Sarcasm is just one more service we offer. -
http://diversify.com Web Applications
Garrett Wade handles them.
http://garrettwade.com/jump.jsp?lGen=detail&itemID=103531&itemType=PRODUCT&iMainCat=0&iSubCat=0&iProductID=103531
On Sat, 26 Feb 2005 10:10:40 GMT, "am" <[email protected]> wrote:
>Does the group have any experience of screwdriver bit holder that can be
>used in a Stanley Yankee 131B spiral screwdriver. A friend had made one for
>his 130 out of a standard magnetic holder but the 131 requires a thicker
>shaft than the standard 1/4 inch bit holder has.
>Thanks in advance.
>