"Vaughn" <[email protected]> wrote in message
news:[email protected]...
>I went and bought a cheap black and decker sander (for very small jobs)
>with h&l but ordered 150 sanding disks with PSA/sticky backing. I could
>just buy more but they're expensive (600 and 1000 grit). Any ideas how I
>can make this combination play nice together?
With many sanders you can change out the pad. I can use H & L or PSA If I
chose to. I would know however if B&D offers the PSA pad. Can you exchange
the paper?
"Vaughn" <[email protected]> wrote in
news:[email protected]:
> I went and bought a cheap black and decker sander (for very small
> jobs) with h&l but ordered 150 sanding disks with PSA/sticky backing.
> I could just buy more but they're expensive (600 and 1000 grit). Any
> ideas how I can make this combination play nice together?
>
> Thanks!
>
> Vaughn
>
>
I don't have a solution for you on how to get the PSA affixed to a H&L
sander, but...
600 & 1000 are grits I usually associate with the last rounds of a wood
finishing process. Which I generally do by hand. YMMV.
Stick them to a hand sanding block?
Patriarch
I could return everything, I just wanted to get it done this weekend if
possible and don't want to wait (bought the disks online). I'm pretty
resourceful so I'm sure I'll figure something out ;-)
"Edwin Pawlowski" <[email protected]> wrote in message
news:[email protected]...
>
> "Vaughn" <[email protected]> wrote in message
> news:[email protected]...
>>I went and bought a cheap black and decker sander (for very small jobs)
>>with h&l but ordered 150 sanding disks with PSA/sticky backing. I could
>>just buy more but they're expensive (600 and 1000 grit). Any ideas how I
>>can make this combination play nice together?
>
>
> Won't the dealer take them back? Return them and get the right ones is
> the easiest method. Or try selling them either here or eBay.
>
Well then share it brother! I use 600 and 1000 to get started - knock down
the high stuff and get started on the polishing - then go to the 1200, 1500
and 2000 to get rid of all the sanding marks, I do that all by hand - lot of
work! After that I use the 3M polishing compounds so for my projects so 600
and 1000 are not the last rounds in my case. I'm finishing drums (acoustic
drums) so they take much wear and tear and a nice glassy finish is my goal.
So what's your solution? I promise to do the finish sanding by hand ;-). I
got this sander because the first sandings are killing my wrists, even with
a sanding block.
Thanks,
V
"Patriarch" <[email protected]> wrote in message
news:[email protected]...
> "Vaughn" <[email protected]> wrote in
> news:[email protected]:
>
>> I went and bought a cheap black and decker sander (for very small
>> jobs) with h&l but ordered 150 sanding disks with PSA/sticky backing.
>> I could just buy more but they're expensive (600 and 1000 grit). Any
>> ideas how I can make this combination play nice together?
>>
>> Thanks!
>>
>> Vaughn
>>
>>
>
> I don't have a solution for you on how to get the PSA affixed to a H&L
> sander, but...
>
> 600 & 1000 are grits I usually associate with the last rounds of a wood
> finishing process. Which I generally do by hand. YMMV.
>
> Stick them to a hand sanding block?
>
> Patriarch
I don't think this one (cheap is the key here) has a PSA pad, but I'm going
to try to find one. The sander I wanted was out of stock and came with
both...dang! I messed up on my order, meant to buy H&L.
"Leon" <[email protected]> wrote in message
news:[email protected]...
>
> "Vaughn" <[email protected]> wrote in message
> news:[email protected]...
>>I went and bought a cheap black and decker sander (for very small jobs)
>>with h&l but ordered 150 sanding disks with PSA/sticky backing. I could
>>just buy more but they're expensive (600 and 1000 grit). Any ideas how I
>>can make this combination play nice together?
>
> With many sanders you can change out the pad. I can use H & L or PSA If
> I chose to. I would know however if B&D offers the PSA pad. Can you
> exchange the paper?
>
I meant to say that the drums DON'T take much wear and tear.
"Vaughn" <[email protected]> wrote in message
news:[email protected]...
> Well then share it brother! I use 600 and 1000 to get started - knock
> down the high stuff and get started on the polishing - then go to the
> 1200, 1500 and 2000 to get rid of all the sanding marks, I do that all by
> hand - lot of work! After that I use the 3M polishing compounds so for my
> projects so 600 and 1000 are not the last rounds in my case. I'm
> finishing drums (acoustic drums) so they take much wear and tear and a
> nice glassy finish is my goal. So what's your solution? I promise to do
> the finish sanding by hand ;-). I got this sander because the first
> sandings are killing my wrists, even with a sanding block.
>
> Thanks,
>
> V
>
> "Patriarch" <[email protected]> wrote in message
> news:[email protected]...
>> "Vaughn" <[email protected]> wrote in
>> news:[email protected]:
>>
>>> I went and bought a cheap black and decker sander (for very small
>>> jobs) with h&l but ordered 150 sanding disks with PSA/sticky backing.
>>> I could just buy more but they're expensive (600 and 1000 grit). Any
>>> ideas how I can make this combination play nice together?
>>>
>>> Thanks!
>>>
>>> Vaughn
>>>
>>>
>>
>> I don't have a solution for you on how to get the PSA affixed to a H&L
>> sander, but...
>>
>> 600 & 1000 are grits I usually associate with the last rounds of a wood
>> finishing process. Which I generally do by hand. YMMV.
>>
>> Stick them to a hand sanding block?
>>
>> Patriarch
>
>
well, didn't work. I mean what I was using the orbit sander for didn't work
so this whole discussion is moot. ;-)
thanks for the input, I'll have more questions!
V
"Vaughn" <[email protected]> wrote in message
news:[email protected]...
>I went and bought a cheap black and decker sander (for very small jobs)
>with h&l but ordered 150 sanding disks with PSA/sticky backing. I could
>just buy more but they're expensive (600 and 1000 grit). Any ideas how I
>can make this combination play nice together?
>
> Thanks!
>
> Vaughn
>
Buy a couple of the real fine Hook & Loop disks. The PSA disks should
stick to them and the the H&L disks go on your sander. This certainly
isn't the best way, but it works. I do this now and then with a PC 6"
ROS simply because I was given a bunch of PSA disks. It works OK as
long as the underlying H&L disk is finer than the PSA disk that is
actually being used. BTW I usually use the H&L disk first (or just
keep a well used one on hand) so that it is worn down which seems to
aid the PSA sticking to it.
Dave Hall
On Fri, 25 Feb 2005 15:46:50 -0700, "Vaughn"
<[email protected]> wrote:
>I don't think this one (cheap is the key here) has a PSA pad, but I'm going
>to try to find one. The sander I wanted was out of stock and came with
>both...dang! I messed up on my order, meant to buy H&L.
>
>"Leon" <[email protected]> wrote in message
>news:[email protected]...
>>
>> "Vaughn" <[email protected]> wrote in message
>> news:[email protected]...
>>>I went and bought a cheap black and decker sander (for very small jobs)
>>>with h&l but ordered 150 sanding disks with PSA/sticky backing. I could
>>>just buy more but they're expensive (600 and 1000 grit). Any ideas how I
>>>can make this combination play nice together?
>>
>> With many sanders you can change out the pad. I can use H & L or PSA If
>> I chose to. I would know however if B&D offers the PSA pad. Can you
>> exchange the paper?
>>
>
Vaughn,
Don't have a solution for you, but when you finish your next set, post some
pics on ABPW. Don't see many drum projects around here.....
Joe
"Vaughn" <[email protected]> wrote in message
news:[email protected]...
> I meant to say that the drums DON'T take much wear and tear.
>
> "Vaughn" <[email protected]> wrote in message
> news:[email protected]...
> > Well then share it brother! I use 600 and 1000 to get started - knock
> > down the high stuff and get started on the polishing - then go to the
> > 1200, 1500 and 2000 to get rid of all the sanding marks, I do that all
by
> > hand - lot of work! After that I use the 3M polishing compounds so for
my
> > projects so 600 and 1000 are not the last rounds in my case. I'm
> > finishing drums (acoustic drums) so they take much wear and tear and a
> > nice glassy finish is my goal. So what's your solution? I promise to do
> > the finish sanding by hand ;-). I got this sander because the first
> > sandings are killing my wrists, even with a sanding block.
> >
> > Thanks,
> >
> > V
> >
> > "Patriarch" <[email protected]> wrote in message
> > news:[email protected]...
> >> "Vaughn" <[email protected]> wrote in
> >> news:[email protected]:
> >>
> >>> I went and bought a cheap black and decker sander (for very small
> >>> jobs) with h&l but ordered 150 sanding disks with PSA/sticky backing.
> >>> I could just buy more but they're expensive (600 and 1000 grit). Any
> >>> ideas how I can make this combination play nice together?
> >>>
> >>> Thanks!
> >>>
> >>> Vaughn
> >>>
> >>>
> >>
> >> I don't have a solution for you on how to get the PSA affixed to a H&L
> >> sander, but...
> >>
> >> 600 & 1000 are grits I usually associate with the last rounds of a wood
> >> finishing process. Which I generally do by hand. YMMV.
> >>
> >> Stick them to a hand sanding block?
> >>
> >> Patriarch
> >
> >
>
>
"Vaughn" <[email protected]> wrote in message
news:[email protected]...
>I went and bought a cheap black and decker sander (for very small jobs)
>with h&l but ordered 150 sanding disks with PSA/sticky backing. I could
>just buy more but they're expensive (600 and 1000 grit). Any ideas how I
>can make this combination play nice together?
Won't the dealer take them back? Return them and get the right ones is the
easiest method. Or try selling them either here or eBay.