Anyone have any experience with these saws as sold by Woodcraft? I've got my
eye on a 26" 4.5 TPI rip saw and a 22" 12 TPI crosscut saw at steeply
discounted prices... store failure and liquidation. I'd been waiting for L-N
to get his saws to market but based on my last conversation with Tom L-N
that isn't going to happen soon due to production startup issues--handles
that meet his high standards. If the Lynx saws aren't superior tools I'd
just as soon wait for Tom L-N to get his saws to market... Any feedback is
appreciated.
John
"Zz Yzx" <[email protected]> wrote in message
news:[email protected]...
>I DO NOT have experience with the Lynx saws.
>
>
> On Sun, 18 Jun 2006 22:13:38 GMT, "John Grossbohlin"
> <[email protected]> wrote:
>
>>Anyone have any experience with these saws as sold by Woodcraft? I've got
>>my
>>eye on a 26" 4.5 TPI rip saw and a 22" 12 TPI crosscut saw at steeply
>>discounted prices... store failure and liquidation. I'd been waiting for
>>L-N
>>to get his saws to market but based on my last conversation with Tom L-N
>>that isn't going to happen soon due to production startup issues--handles
>>that meet his high standards. If the Lynx saws aren't superior tools I'd
>>just as soon wait for Tom L-N to get his saws to market... Any feedback is
>>appreciated.
I ended up picking up the two saws... the price was too good to pass up on
hand made saws. They feel good and cut good. The only weak thing is that
they don't have those nice curly maple handles like the L-N saws... I still
need a nice 26" crosscut saw of about 6-8 TPI so one of those curly maple
beauties will find it's way into my shop yet. ;~)
John
Tom Watson wrote:
> John:
>=20
> If you ever get a chance, get hold of a Disston from the beginnings o=
f
> the previous century.=A0=A0They=A0are=A0out=A0there=A0and=A0they=A0ar=
e=A0better=A0than=A0any
> of the current crop.
>=20
> The steel is immaculate and the workmanship is without compare.
>=20
Oh, I don't know. An old Atkins "silver steel" saw compares pretty goo=
d :-).
--=20
It's turtles, all the way down
John Grossbohlin wrote:
> I'd love to have some nice old saws... but don't have the time, or interest
> in making the time, to go find them. I've got so many other things to focus
> on!
No need for that, although the "hunt" can be fun. Look on Ebay under
collectibles. Last time I looked there were lots of Disstons and a
sprinkling of other brands.
--
It's turtles, all the way down
> John Grossbohlinwrote:
Anyone have any experience with these saws as sold by Woodcraft? I've
got my
> eye on a 26" 4.5 TPI rip saw and a 22" 12 TPI crosscut saw
at steeply
> discounted prices... store failure and liquidation. I'd been waiting
for L-N
> to get his saws to market but based on my last conversation with Tom
L-N
> that isn't going to happen soon due to production startup
issues--handles
> that meet his high standards. If the Lynx saws aren't superior tools
I'd
> just as soon wait for Tom L-N to get his saws to market... Any
feedback is
> appreciated.
>
> John
Hopefully no one thinks I am being too predatory...
The Lynx are OK saws. Decent steel, not so great of handles. Certainly
cheaper than if Tom gets his panel saw to market even without the deal
you can get. I've handled his panel saw--it is nice.
As a consideration:
http://www.wenzloffandsons.com/saws/pe/pe_0006a.jpg
Take care, Mike
"Larry Blanchard" <[email protected]> wrote in message
news:[email protected]...
Tom Watson wrote:
> John:
>
> If you ever get a chance, get hold of a Disston from the beginnings of
> the previous century. They are out there and they are better than any
> of the current crop.
>
> The steel is immaculate and the workmanship is without compare.
>
>Oh, I don't know. An old Atkins "silver steel" saw compares pretty good
>:-).
I'd love to have some nice old saws... but don't have the time, or interest
in making the time, to go find them. I've got so many other things to focus
on!
Pretty much all the nice old tools I've got (e.g., Stanley 45 plane,
Sergeant rabbet plane, socket chisels, etc.) were found in dead relative's
basements or in the basement of a house I bought. Due to attrition I'm
running out of free "good old tool" sources. I'll be tapping into the mass
market Crapsman and other low end powertools with the next round of
passings. I suppose I might find some of the current generation of good
tools (e.g., L-N) if I get friendly with the spouses of some of the older
members of my club... but that would be blatantly opportunistic... and I
don't know if I could live with myself. ;~)
John
I DO NOT have experience with the Lynx saws.
I do have experience with the L-N tenon saws and several L-N planes.
EXCELLENT tools, every one. I'll continue to bur L-N tools.
BUT, I also have expereince with a framesaw, e.g.:
http://www.fine-tools.com/gestell.htm
The E.C.E. framesaw with the Japanese style blades is awsome. I defer
to The Master (Tage Fride), and understand why he recomends fram saws
for msot work.
Usual disclaimers apply.
Zzzzzz-Zzzzzzz
-Zz
On Sun, 18 Jun 2006 22:13:38 GMT, "John Grossbohlin"
<[email protected]> wrote:
>Anyone have any experience with these saws as sold by Woodcraft? I've got my
>eye on a 26" 4.5 TPI rip saw and a 22" 12 TPI crosscut saw at steeply
>discounted prices... store failure and liquidation. I'd been waiting for L-N
>to get his saws to market but based on my last conversation with Tom L-N
>that isn't going to happen soon due to production startup issues--handles
>that meet his high standards. If the Lynx saws aren't superior tools I'd
>just as soon wait for Tom L-N to get his saws to market... Any feedback is
>appreciated.
>
>John
>
"Zz Yzx" <[email protected]> wrote in message
news:[email protected]...
>I DO NOT have experience with the Lynx saws.
>
> I do have experience with the L-N tenon saws and several L-N planes.
> EXCELLENT tools, every one. I'll continue to bur L-N tools.
I've got a couple L-N back saws, and a couple planes, and couple spoke
shaves... great tools. Issue is waiting for Tom L-N to get the panel saws to
market or snap up the Lynx saws now at a steep discount (two for far less
than the price of one L-N saw at the anticipated pricing).
> BUT, I also have expereince with a framesaw, e.g.:
>
> http://www.fine-tools.com/gestell.htm
I've considered them and will likely end up with one or more somewhere along
the line. ;~)
John
On Thu, 22 Jun 2006 02:44:12 GMT, "John Grossbohlin"
<[email protected]> wrote:
>I ended up picking up the two saws... the price was too good to pass up on
>hand made saws. They feel good and cut good. The only weak thing is that
>they don't have those nice curly maple handles like the L-N saws... I still
>need a nice 26" crosscut saw of about 6-8 TPI so one of those curly maple
>beauties will find it's way into my shop yet. ;~)
John:
If you ever get a chance, get hold of a Disston from the beginnings of
the previous century. They are out there and they are better than any
of the current crop.
The steel is immaculate and the workmanship is without compare.
You can often pick these up for pennies in the roadside venues.
I own two of the Lynx brand and half a dozen of the old Disstons.
I'd happily sell the Lynx's for a few more Disstons.
Regards,
Tom Watson
tjwatson1ATcomcastDOTnet (real email)
http://home.comcast.net/~tjwatson1/