c

13/12/2005 1:33 AM

Can't identify wood

This question is for all those who have worked with reclaimed wood and
have a few clues as to what kind of wood it is you are using.

My kid sent me a load of reclaimed 'pallet wood'. 2X4X 6ft long, and
unplaned. Each 2x4 is fairly light as in not as heavy as spruce/pine
but heavier than cedar. I split one on the BS and the grain is
uniform, knot free and a white/yellow color with very little color
variation. One 2x4 has what appears to be insect holes. All of
these 2x4s are as straight as can be with no twists, warps, cups, etc.
This last part is what is really throwing me off, because this stuff
has been sitting out side in all weather for some time.

Pete



This topic has 12 replies

BI

"Brian In Hampton"

in reply to [email protected] on 13/12/2005 1:33 AM

13/12/2005 12:31 AM

I get pallet wood all the time throw most of it away. Most pallets are oak
and poplar , some pine and on a rare occasion CHERRY!!!
What you are looking at is most likley to be poplar....Brian in Hampton.
--
www.members.cox.net/bsnikitas
"Never Underestimate The Power Of Stupid People
In Large Groups!"
<[email protected]> wrote in message news:[email protected]...
> This question is for all those who have worked with reclaimed wood and
> have a few clues as to what kind of wood it is you are using.
>
> My kid sent me a load of reclaimed 'pallet wood'. 2X4X 6ft long, and
> unplaned. Each 2x4 is fairly light as in not as heavy as spruce/pine
> but heavier than cedar. I split one on the BS and the grain is
> uniform, knot free and a white/yellow color with very little color
> variation. One 2x4 has what appears to be insect holes. All of
> these 2x4s are as straight as can be with no twists, warps, cups, etc.
> This last part is what is really throwing me off, because this stuff
> has been sitting out side in all weather for some time.
>
> Pete
>
>
>

BI

"Brian In Hampton"

in reply to [email protected] on 13/12/2005 1:33 AM

13/12/2005 12:31 AM

I get pallet wood all the time throw most of it away. Most pallets are oak
and poplar , some pine and on a rare occasion CHERRY!!!
What you are looking at is most likley to be poplar....Brian in Hampton.
--
www.members.cox.net/bsnikitas
"Never Underestimate The Power Of Stupid People
In Large Groups!"
<[email protected]> wrote in message news:[email protected]...
> This question is for all those who have worked with reclaimed wood and
> have a few clues as to what kind of wood it is you are using.
>
> My kid sent me a load of reclaimed 'pallet wood'. 2X4X 6ft long, and
> unplaned. Each 2x4 is fairly light as in not as heavy as spruce/pine
> but heavier than cedar. I split one on the BS and the grain is
> uniform, knot free and a white/yellow color with very little color
> variation. One 2x4 has what appears to be insect holes. All of
> these 2x4s are as straight as can be with no twists, warps, cups, etc.
> This last part is what is really throwing me off, because this stuff
> has been sitting out side in all weather for some time.
>
> Pete
>
>
>

DB

Dave Balderstone

in reply to [email protected] on 13/12/2005 1:33 AM

13/12/2005 1:44 PM

In article <[email protected]>, <[email protected]> wrote:

> My kid sent me a load of reclaimed 'pallet wood'. 2X4X 6ft long, and
> unplaned.

If the pallets originated in Manitoba, they're almost certainly poplar.

--
Life. Nature's way of keeping meat fresh. -- Dr. Who

JJ

in reply to [email protected] on 13/12/2005 1:33 AM

13/12/2005 8:48 AM

Tue, Dec 13, 2005, 1:33am (EST+5) [email protected] doth wonder:
This question is for all those who have worked with reclaimed wood and
have a few clues as to what kind of wood it is you are using.
My kid sent me a load of reclaimed 'pallet wood' <snip>

That's a no brainer. It's popular wood. Free wood is always
popular.




JOAT
A rolling stone gathers no moss...unless it's a hobby he does on the
weekends.

EP

"Edwin Pawlowski"

in reply to [email protected] on 13/12/2005 1:33 AM

13/12/2005 4:33 AM


<[email protected]> wrote in message news:[email protected]...
> This question is for all those who have worked with reclaimed wood and
> have a few clues as to what kind of wood it is you are using.
>
> My kid sent me a load of reclaimed 'pallet wood'. 2X4X 6ft long, and
> unplaned. Each 2x4 is fairly light as in not as heavy as spruce/pine
> but heavier than cedar. I split one on the BS and the grain is
> uniform, knot free and a white/yellow color with very little color
> variation. One 2x4 has what appears to be insect holes. All of
> these 2x4s are as straight as can be with no twists, warps, cups, etc.
> This last part is what is really throwing me off, because this stuff
> has been sitting out side in all weather for some time.

I have some wood that came from Korea that sounds as you describe. Has an
odd sweet smell when cut. If it is the same, it does not stain well, but
looks OK natural and takes paint OK. I have no idea what the species is.

EP

"Edwin Pawlowski"

in reply to [email protected] on 13/12/2005 1:33 AM

13/12/2005 4:33 AM


<[email protected]> wrote in message news:[email protected]...
> This question is for all those who have worked with reclaimed wood and
> have a few clues as to what kind of wood it is you are using.
>
> My kid sent me a load of reclaimed 'pallet wood'. 2X4X 6ft long, and
> unplaned. Each 2x4 is fairly light as in not as heavy as spruce/pine
> but heavier than cedar. I split one on the BS and the grain is
> uniform, knot free and a white/yellow color with very little color
> variation. One 2x4 has what appears to be insect holes. All of
> these 2x4s are as straight as can be with no twists, warps, cups, etc.
> This last part is what is really throwing me off, because this stuff
> has been sitting out side in all weather for some time.

I have some wood that came from Korea that sounds as you describe. Has an
odd sweet smell when cut. If it is the same, it does not stain well, but
looks OK natural and takes paint OK. I have no idea what the species is.

GG

"George"

in reply to [email protected] on 13/12/2005 1:33 AM

13/12/2005 3:15 PM


"Dave Balderstone" <dave@N_O_T_T_H_I_S.balderstone.ca> wrote in message
news:131220051344185776%dave@N_O_T_T_H_I_S.balderstone.ca...
> In article <[email protected]>, <[email protected]> wrote:
>
>> My kid sent me a load of reclaimed 'pallet wood'. 2X4X 6ft long, and
>> unplaned.
>
> If the pallets originated in Manitoba, they're almost certainly poplar.
>

Of course, not "poplar," but poplar.

Jn

"Jerry"

in reply to [email protected] on 13/12/2005 1:33 AM

12/12/2005 8:36 PM

Hmmmm....could it be Poplar?

Regards
9 finger Jer

<[email protected]> wrote in message news:[email protected]...
> This question is for all those who have worked with reclaimed wood and
> have a few clues as to what kind of wood it is you are using.
>
> My kid sent me a load of reclaimed 'pallet wood'. 2X4X 6ft long, and
> unplaned. Each 2x4 is fairly light as in not as heavy as spruce/pine
> but heavier than cedar. I split one on the BS and the grain is
> uniform, knot free and a white/yellow color with very little color
> variation. One 2x4 has what appears to be insect holes. All of
> these 2x4s are as straight as can be with no twists, warps, cups, etc.
> This last part is what is really throwing me off, because this stuff
> has been sitting out side in all weather for some time.
>
> Pete
>
>
>

DD

"Dr. Deb"

in reply to [email protected] on 13/12/2005 1:33 AM

12/12/2005 10:20 PM

[email protected] wrote:

> This question is for all those who have worked with reclaimed wood and
> have a few clues as to what kind of wood it is you are using.
>
> My kid sent me a load of reclaimed 'pallet wood'. 2X4X 6ft long, and
> unplaned. Each 2x4 is fairly light as in not as heavy as spruce/pine
> but heavier than cedar. I split one on the BS and the grain is
> uniform, knot free and a white/yellow color with very little color
> variation. One 2x4 has what appears to be insect holes. All of
> these 2x4s are as straight as can be with no twists, warps, cups, etc.
> This last part is what is really throwing me off, because this stuff
> has been sitting out side in all weather for some time.
>
> Pete


Send a small section to the National Forest Products Lab in Wisconsin. It
will take a few weeks, but you will have a definative answer, and all it
costs is shipping - one way.

Their URL is

http://www.fpl.fs.fed.us/

DD

"Dr. Deb"

in reply to [email protected] on 13/12/2005 1:33 AM

12/12/2005 10:20 PM

[email protected] wrote:

> This question is for all those who have worked with reclaimed wood and
> have a few clues as to what kind of wood it is you are using.
>
> My kid sent me a load of reclaimed 'pallet wood'. 2X4X 6ft long, and
> unplaned. Each 2x4 is fairly light as in not as heavy as spruce/pine
> but heavier than cedar. I split one on the BS and the grain is
> uniform, knot free and a white/yellow color with very little color
> variation. One 2x4 has what appears to be insect holes. All of
> these 2x4s are as straight as can be with no twists, warps, cups, etc.
> This last part is what is really throwing me off, because this stuff
> has been sitting out side in all weather for some time.
>
> Pete


Send a small section to the National Forest Products Lab in Wisconsin. It
will take a few weeks, but you will have a definative answer, and all it
costs is shipping - one way.

Their URL is

http://www.fpl.fs.fed.us/

FC

Fly-by-Night CC

in reply to [email protected] on 13/12/2005 1:33 AM

12/12/2005 9:28 PM

In article <[email protected]>,
"Edwin Pawlowski" <[email protected]> wrote:

> I have some wood that came from Korea that sounds as you describe. Has an
> odd sweet smell when cut. If it is the same, it does not stain well, but
> looks OK natural and takes paint OK. I have no idea what the species is.

Might it be Radiata Pine? It's a fast growing, very bland colored
softwood.
--
Owen Lowe
The Fly-by-Night Copper Company
__________

"I pledge allegiance to the flag of the
Corporate States of America and to the
Republicans for which it stands, one nation,
under debt, easily divisible, with liberty
and justice for oil."
- Wiley Miller, Non Sequitur, 1/24/05

FC

Fly-by-Night CC

in reply to [email protected] on 13/12/2005 1:33 AM

12/12/2005 9:28 PM

In article <[email protected]>,
"Edwin Pawlowski" <[email protected]> wrote:

> I have some wood that came from Korea that sounds as you describe. Has an
> odd sweet smell when cut. If it is the same, it does not stain well, but
> looks OK natural and takes paint OK. I have no idea what the species is.

Might it be Radiata Pine? It's a fast growing, very bland colored
softwood.
--
Owen Lowe
The Fly-by-Night Copper Company
__________

"I pledge allegiance to the flag of the
Corporate States of America and to the
Republicans for which it stands, one nation,
under debt, easily divisible, with liberty
and justice for oil."
- Wiley Miller, Non Sequitur, 1/24/05


You’ve reached the end of replies