On Fri, 20 Jul 2018 08:52:30 -0500, Leon <lcb11211@swbelldotnet>
wrote:
>On 7/19/2018 9:58 PM, Meanie wrote:
>> On to the finish of my stair treads and risers. I'm going with a poly
>> but uncertain which one to use. Suggestions?
>>
>> Thanks
>
>General Finishes Arm-R-Seal should work.
>
>https://generalfinishes.com/compare-all-topcoats
No personal experience - but I have heard good things
about the General top coat products - and they're
$ 35 - 40 per QUART in Canada from LV.
John T.
On Fri, 20 Jul 2018 06:40:27 -0700, Electric Comet
<[email protected]> wrote:
>On Thu, 19 Jul 2018 22:58:08 [email protected] wrote:
>
>> On to the finish of my stair treads and risers. I'm going with a poly
>> but uncertain which one to use. Suggestions?
>
>no brand recommendation but i have minwax and flecto
>
>but read that tiny print
>
>some need couple of weeks to fully cure
If it's stairs, use a finish specifically intended for floors.
Googling, it looks like Bona Traffic is the hot stuff right now--you
can get it from Amazon but it's a two component product with a four
hour pot life so it may be more than you want to get into.
Note that I have not used it--for all I know it may be utter crap from
a company with a good marketing engine, but it seems to have a lot of
buzz.
On Thu, 19 Jul 2018 22:58:08 [email protected] wrote:
> On to the finish of my stair treads and risers. I'm going with a poly
> but uncertain which one to use. Suggestions?
no brand recommendation but i have minwax and flecto
but read that tiny print
some need couple of weeks to fully cure