"SonomaProducts.com" wrote:
Sapele is open grain so if you mean physically flat as part of silk,
you will need to use grain filler.
Exterior really needs spar varnish. It will usually be glossy. If you
mean what is called satin finish. You can find spar varnish with a
satin finish (not sure it's made), or add a flattener, or rub it out
with steel wool to desired sheen.
----------------------------------------------------
True spar varnish is the last thing you want to use in a high traffic
area like an entry door since it never totally cures hard to the
touch.
OTOH either true marine varnish or poly are an excellent choice.
Since Arthur is in the UK, suggest he find a marine chandlery and buy
either some Epifanes two part poly or straight Epifanes varnish.
Both will contain UV inhibitors which make them good for exterior
service.
As "SonomaProducts.com" suggests, don't want a high gloss finish, hit
it with some 0000 steel wool after it cures.
Have fun.
Lew
Sapele is open grain so if you mean physically flat as part of silk,
you will need to use grain filler.
Exterior really needs spar varnish. It will usually be glossy. If you
mean what is called satin finish. You can find spar varnish with a
satin finish (not sure it's made), or add a flattener, or rub it out
with steel wool to desired sheen.
On Oct 25, 12:10=A0pm, "Arthur 51" <[email protected]> wrote:
> I have 19mm thick - 26cm x 105cm sapele fielded panels
> on my door frame which will be exposed to the weather..
> Any recommendations for achieving a silk finish?
>
> Thanks.
>
> Arthur, in the UK