Someone posted pics to abpw a while back of their downdraft table. From the
pics I saved it looked like it had a piano hinge for the top and two filters
that layed flat under the table top. If you read this can you post some
specs on the table size etc.
Thanks
--
Mike S.
[email protected]
Mike S. wrote:
> Someone posted pics to abpw a while back of their downdraft table.
> From the pics I saved it looked like it had a piano hinge for the top
> and two filters that layed flat under the table top. If you read this
> can you post some specs on the table size etc.
> Thanks
It might have been mine. The idea came from an old Woodsmith / ShopNotes
issue someone lent me. I returned it <g> so I don't have the issue number.
I suggest you look over these plans to make one that gets finer dust than
mine does.
http://www.wood-workers.com/users/charlieb/CBAirCleaner.html
The top is a 2' x 4' sheet of pegboard. The holes were all drilled out to
increase airflow.
The carcase instructions were
1. Find a squirrel cage motor. Heating / AC people often have them for
free. (Mine was.)
2. Build a box to fit. There should be at least 3" on each side for
good air flow.
HTH.
-- Mark