On Thu, 11 Dec 2008 09:42:19 -0800 (PST), "[email protected]"
<[email protected]> wrote:
>On Dec 11, 10:56 am, rasberry <[email protected]> wrote:
>> I am currently looking at three lathes available here in Canada in my
>> price range and am seeking advice from any and all who have experience
>> with any of these models.
>>
>> King Canada KWL-1016C
>> General International 25-100M
>> Delta Shopmaster LA200
>
>You will do yourself a good turn by posting this message over at:
>
> rec.crafts.woodturning
>
>as well as here. There are usually a lot of helpful folks hanging
>around.
>
>Robert
I agree with Robert. General is usually very good, but you will want
a quality set of starting tools, so set aside $200-600. Also think
about what you will be making. Happy turning!
On Dec 11, 10:56=A0am, rasberry <[email protected]> wrote:
> I am currently looking at three lathes available here in Canada in my
> price range and am seeking advice from any and all who have experience
> with any of these models.
>
> King Canada KWL-1016C
> General International 25-100M
> Delta Shopmaster LA200
You will do yourself a good turn by posting this message over at:
rec.crafts.woodturning
as well as here. There are usually a lot of helpful folks hanging
around.
Robert