I recently picked up a 6 1/8" jointer model number: 149.23628 . The guy I
bought it from did not have the blades or the blade (clamps?) or the
associated screws. I went to Sears to inquire about the lot and they only
sell a "kit" that runs about 75.00. I know the blades run about 10.00 -
13.00 in Sears but cannot understand how they can get approximately 65.00
for the rest. Anyone know of a place or person who might have these that I
can purchase cheaper? I mean we are only talking about 8 screws and 2 pieces
of steel? Your help would be greatly appreciated.
Kevin
--
Well, you could buy carbide at $135.Saves on resharpening.
On Sat, 15 Nov 2003 08:54:35 -0800, "yobosaeyo" <[email protected]>
wrote:
>I recently picked up a 6 1/8" jointer model number: 149.23628 . The guy I
>bought it from did not have the blades or the blade (clamps?) or the
>associated screws. I went to Sears to inquire about the lot and they only
>sell a "kit" that runs about 75.00. I know the blades run about 10.00 -
>13.00 in Sears but cannot understand how they can get approximately 65.00
>for the rest. Anyone know of a place or person who might have these that I
>can purchase cheaper? I mean we are only talking about 8 screws and 2 pieces
>of steel? Your help would be greatly appreciated.
> Kevin
"yobosaeyo" <[email protected]> wrote in message
news:eTstb.722$vJ6.417@fed1read05...
> I recently picked up a 6 1/8" jointer model number: 149.23628 .
Try Sears Parts{ http://www3.sears.com/ } site with the complete model
number
they can get the part (knives) alone. not kit.
Ken
--
Remember 9/11
God Bless US
"yobosaeyo" <[email protected]> wrote in message
> I know the blades run about 10.00 -
> 13.00 in Sears but cannot understand how they can get approximately 65.00
> for the rest.
There is a technical term for this. It is know as "we have you by the balls
! ! !"
Not the type of thing that a third party is interested in making as there is
no volume to it. So, they just have to decide how hard to squeeze
Ed
[email protected]
http://pages.cthome.net/edhome
Yep... Gotta love that Sears place. Who else would have the gonads to charge
2.17 per screw with eight needed for the blade clamps? Hell that was the
bulk dollar wise for the damn parts!
--
---------------------------------------------------------------------
"Are you still wasting your time with spam?...
There is a solution!"
Protected by GIANT Company's Spam Inspector
The most powerful anti-spam software available.
http://www.giantcompany.com
"yobosaeyo" <[email protected]> wrote in message
news:eTstb.722$vJ6.417@fed1read05...
> I recently picked up a 6 1/8" jointer model number: 149.23628 . The guy I
> bought it from did not have the blades or the blade (clamps?) or the
> associated screws. I went to Sears to inquire about the lot and they only
> sell a "kit" that runs about 75.00. I know the blades run about 10.00 -
> 13.00 in Sears but cannot understand how they can get approximately 65.00
> for the rest. Anyone know of a place or person who might have these that I
> can purchase cheaper? I mean we are only talking about 8 screws and 2
pieces
> of steel? Your help would be greatly appreciated.
> Kevin
>
>
> --
>
>
I too had a simular problem, when restoring an old six inch jointer that
weighed 400 pounds! Went to a machine shop and had the jointer plates and
cap screws made. It cosrt me about 75 bucks four four jointer plates and 12
round cap screws. The cap screws have round tops. If they are not round
(cap screws) you will have a hell of a time trying to align the knives.
"yobosaeyo" <[email protected]> wrote in message
news:eTstb.722$vJ6.417@fed1read05...
> I recently picked up a 6 1/8" jointer model number: 149.23628 . The guy I
> bought it from did not have the blades or the blade (clamps?) or the
> associated screws. I went to Sears to inquire about the lot and they only
> sell a "kit" that runs about 75.00. I know the blades run about 10.00 -
> 13.00 in Sears but cannot understand how they can get approximately 65.00
> for the rest. Anyone know of a place or person who might have these that I
> can purchase cheaper? I mean we are only talking about 8 screws and 2
pieces
> of steel? Your help would be greatly appreciated.
> Kevin
>
>
> --
>
>