I just did a search in rec.woodworking on Google groups for information on
re-doing the japanning on Stanley planes, and found a number of links that
claim to lead to information about the process. The messages I read date
from around 1996 to 2002. Every link I found, without exception, is broken.
Does anyone around here know about any currently-live links to information
about the process and the materials to use to refurbish or replace the
japanning on a Stanley plane?
Thanks,
Tom Dacon
Thanks to everyone who responded. This looks like enough for me to start
with.
Thanks again,
Tom Dacon
"Tom Dacon" <[email protected]> wrote in message
news:[email protected]...
> I just did a search in rec.woodworking on Google groups for information on
> re-doing the japanning on Stanley planes, and found a number of links that
> claim to lead to information about the process. The messages I read date
> from around 1996 to 2002. Every link I found, without exception, is
broken.
>
> Does anyone around here know about any currently-live links to information
> about the process and the materials to use to refurbish or replace the
> japanning on a Stanley plane?
>
> Thanks,
> Tom Dacon
>
>
http://www.cianperez.com/Wood/WoodDocs/Wood_How_To/INDEX_How_To.htm
Left hand column part way down the page under "Know-How".
Good luck
Greg
"Tom Dacon" <[email protected]> wrote in message
news:[email protected]...
> I just did a search in rec.woodworking on Google groups for information on
> re-doing the japanning on Stanley planes, and found a number of links that
> claim to lead to information about the process. The messages I read date
> from around 1996 to 2002. Every link I found, without exception, is
broken.
>
> Does anyone around here know about any currently-live links to information
> about the process and the materials to use to refurbish or replace the
> japanning on a Stanley plane?
>
> Thanks,
> Tom Dacon
>
>
On Sat, 5 Jun 2004 21:40:26 -0700, "Tom Dacon" <[email protected]> wrote:
>I just did a search in rec.woodworking on Google groups for information on
>re-doing the japanning on Stanley planes, and found a number of links that
>claim to lead to information about the process. The messages I read date
>from around 1996 to 2002. Every link I found, without exception, is broken.
>
>Does anyone around here know about any currently-live links to information
>about the process and the materials to use to refurbish or replace the
>japanning on a Stanley plane?
>
>Thanks,
>Tom Dacon
>
http://www.woodcentral.com/cgi-bin/readarticle.pl?dir=handtools&file=articles_117.shtml
IIRC, I ran across a reference, don't recollect where, and haven't been able to retrieve it since - that used the recipe in the
above link. He/she reported that the resulting finish could be marked with the fingernail. After adding rosin in equal parts to the
asphaltum, the finish was much harder. Take it or leave it, YMMV.
Tom Veatch
Wichita, KS USA
try this
http://www.cranialstorage.com/wood/html/japanning.html#Japan-mod-metal
"Tom Dacon" <[email protected]> wrote in message
news:[email protected]...
> I just did a search in rec.woodworking on Google groups for information on
> re-doing the japanning on Stanley planes, and found a number of links that
> claim to lead to information about the process. The messages I read date
> from around 1996 to 2002. Every link I found, without exception, is
broken.
>
> Does anyone around here know about any currently-live links to information
> about the process and the materials to use to refurbish or replace the
> japanning on a Stanley plane?
>
> Thanks,
> Tom Dacon
>
>
I like a paint used by artists on ceramic plates. It has very good
properties for brushing, but should be slightly thinned to minimize
brush strokes showing up. Once the paint is on you bake the plane in an
oven just like a ceramic plate. Came out very nice indeed and while the
oven might have altered the metal slightly in its metallurgical
properties, I could not find any noticeable difference. Bought the
stuff in an artists supply store.
Tom Dacon wrote:
> I just did a search in rec.woodworking on Google groups for information on
> re-doing the japanning on Stanley planes, and found a number of links that
> claim to lead to information about the process. The messages I read date
> from around 1996 to 2002. Every link I found, without exception, is broken.
>
> Does anyone around here know about any currently-live links to information
> about the process and the materials to use to refurbish or replace the
> japanning on a Stanley plane?
>
> Thanks,
> Tom Dacon
>
>