I just wanted to verify that I read those charts correctly....the
regular box fan with a furnace filter duct taped to it out performed
like 95% of the dedicated air filtration systems??? I've been thinking
about buying one because I've been using an old attic exhaust fan with
some furnace filters but maybe what I have is doing the job!
Greg
[email protected] wrote:
> I just wanted to verify that I read those charts correctly....the
> regular box fan with a furnace filter duct taped to it out performed
> like 95% of the dedicated air filtration systems???
I thought the charts went the other way around...the box fan did okay,
but was beaten by the dedicated systems.
Chris
You read it correctly; the Wood magazine article appears very revealing,
however:
I didn't see in the article any record of what MERV rating was used with the
box fan, as tested. As discussed in the article's sidebar, it should make a
big difference in performance, as well as in price and longevity of the
filters. Ordinary, el-cheapo furnace filters won't remove much fine dust
(i.e., won't do much for your lungs) and MERV-13 and above furnace filters
are in the $15 price range. The article fails to mention anything about how
long these last before becoming so clogged as to restrict air flow CFM. For
that matter, the article fails to mention replacement cost or life of the
high efficiency filters and pre-filters used in the commercial air filter
units.
The apparent dramatic cost/benefit consideration favoring the box fan /
furnace filter combo, fairly begs for a follow-on article devoted to it.
I suspect that ideal would be a filter sandwich comprised of a low MERV
pre-filter to get the coarse dust and prolong the clog-free life of the
expensive high MERV filter under it (i.e., closest to the fan inlet).
Perhaps a simple ribbon tied to the outlet screen would suffice to provide
an indication of reduced airflow as the filter(s) start to clog. It would
sure be nice to see an article specifically on various box fan and filter
combinations to help sort out these considerations.
The Wood magazine article also failed to identify the make and model of the
box fan used in the test. Home Depot, Lowe's and Wal-Mart typically feature
cheap box fans for $10-12 in the spring. Their design seems to changes a
little each year. Anybody seen an article comparing makes and models of box
fans for CFM and static pressure performance which could be significantly
affected by blade shape and fan housing design as well as fan blade RPM.
Call me cynical, but I can't help suspecting that box fan blades are
designed more for ease and cost of molding than for performance efficiency.
David Merrill
<[email protected]> wrote in message
news:[email protected]...
> I just wanted to verify that I read those charts correctly....the
> regular box fan with a furnace filter duct taped to it out performed
> like 95% of the dedicated air filtration systems??? I've been thinking
> about buying one because I've been using an old attic exhaust fan with
> some furnace filters but maybe what I have is doing the job!
>
> Greg
>
B A R R Y Wrote:
> [email protected] wrote:-
> I just wanted to verify that I read those charts correctly....the
> regular box fan with a furnace filter duct taped to it out performed
> like 95% of the dedicated air filtration systems??? -
>
> I read that same article and my own experiences don't agree.
>
> My box fans with filters are cheap, portable, and much better than
> nothing. However, a squirrel cage blower based unit, either shop made
>
> or purchased, clears the air far faster.
I find it difficult to believe that a furnace filter mounted on a box
would filter down to 1 micron as the Delta and Jet air cleaners do with
their electrostatic and fine interior sock filters. After reviewing
many air cleaning machines with fellow wood workers, we did determine
that Delta, Jet, and EDS do an excellent job.
I finally purchased a Jet 1000B unit because it is three speed, has
automatic shutoff after either 2, 4, or 8 hours so can can sand all
day, run the unit after you go upstairs to bed. I liked the fact that
he had a separate controller that you could use like a vcr controller
without having to reach up to this ceiling hung unit.
Now, I can begin to stain or varnish, or whatever other finish I
might want on my furniture and wood working projects without the finish
being contaminated with dust in the air.
Hope this helps. Oh yes, many of the guys built their own boxes with
filters mounted and they ALL went with the air cleaners and are happy
they did so.
--
Ron Johnson
[email protected] wrote:
> I just wanted to verify that I read those charts correctly....the
> regular box fan with a furnace filter duct taped to it out performed
> like 95% of the dedicated air filtration systems???
I read that same article and my own experiences don't agree.
My box fans with filters are cheap, portable, and much better than
nothing. However, a squirrel cage blower based unit, either shop made
or purchased, clears the air far faster.