Thanks for suggestion, but access to the depth adjuster knob resticted and
is very difficult. Secondly I'm not sure a machine nut would be any better
strength-wise to absorb impact shock of nail gun.
What I'm wondering is whether other users of this gun have a continuing
problem with this or is this a one-time rare event, just like the "rare
event" of the bad spark plug I had.
IF this happens again and again, I'd just as soon cut my losses and move
onto a different gun?
Cheers,
Jim
> I don't have that gun, so the best I can do is offer some sort of
> vague advice in the form of:
> perhaps you could repair the knob by reaming it out and epoxying in a
> threaded insert... or maybe just replace it with a machine nut...
On Wed, 19 Jan 2005 07:46:12 -0500, "Jim Larkey"
<[email protected]> wrote:
>Does anyone in this NG have any experience with the threads stipping on the
>depth adjustment knob?
>
>Click on the following URL for details:
>http://www.pbase.com/image/38701662.jpg
>
>Thanks much in advance.
>Cheers,
>Jim
>
I don't have that gun, so the best I can do is offer some sort of
vague advice in the form of:
perhaps you could repair the knob by reaming it out and epoxying in a
threaded insert... or maybe just replace it with a machine nut...