[email protected] wrote:
> Can you guys recommend a good paint for resin based columns on my
> house? Any sites with prep info appreciated. Can I use a gloss too?
Manufacturer of the columns recommends???
I just went through a real tribulation trying to 'scuff sand' some tiles in
the bathroom.{To put up a 'tub surround} All the 'instructions' & 'experts'
said a simple sanding with 220 grit would do the job - even for Ceramic. I
went all the way to Carbide tools and Acid Etch . . and all I did was get
VERY CLEAN tile. Finally someone told me that meant they were probably
PORCELAIN.
Then my 'boatbuilder brain' piped up . . . K.I.S.S. Got my can of B.I.N. {by
Zinsser ?} alcohol-based primer {really FAST drying} and slapped on a couple
of coats . . . and 'Bob's your Uncle' !! {This is what I use when I need a
'tie coat' between an epoxy surface/sheathing.and finish coats of paint,
etc.}
This is what I would try, first. Simple, inexpensive, and any mistakes can
be removed with denatured alcohol.
Regards & Good Luck,
Ron Magen
Backyard Boatshop
<[email protected]> wrote in message
news:[email protected]...
> Can you guys recommend a good paint for resin based columns on my
> house? Any sites with prep info appreciated. Can I use a gloss too?
>
> Thanks
>