On 8/3/2015 8:07 PM, Electric Comet wrote:
> On Mon, 3 Aug 2015 17:52:41 -0500
> Leon <lcb11211@swbelldotnet> wrote:
>
>> And the rubber on the HD series Laguna are long strips of rubber, not
>> a circular piece.
>
> how do they attach then
>
Glue. When I inquired about replacement they indicated that the rubber
tires last a very long time and it would probably be best to sent the
wheels to Laguna or a local shop that services BS wheels.
On 8/4/2015 11:22 AM, -MIKE- wrote:
> On 8/4/15 10:49 AM, Electric Comet wrote:
>> On Tue, 4 Aug 2015 09:26:27 -0500 Leon <lcb11211@swbelldotnet>
>> wrote:
>>
>>> Glue. When I inquired about replacement they indicated that the
>>> rubber tires last a very long time and it would probably be best
>>> to sent the wheels to Laguna or a local shop that services BS
>>> wheels.
>>
>> i would think if the saw is true and adjusted properly it would last
>> a long time
>>
>> but probably a video somewhere showing how to do it
>>
>
> There are videos on youtube showing it.
> It's not as difficult as you might think.
> I forget where I got my new tires but they had instructions to put the
> tires in very hot water for a few minutes. That helped them stretch to
> make it easier to get them on the wheel. When they cool off they
> tighten up on the wheel.
>
> Mine have no glue. The wheel has a "curbs" on the edges that hold the
> tire in place. However, I would think spray adhesive or rubber cement
> would work.
>
>
The HD Laguna series uses a "cut to length" piece of rubber. Since it
is not stretched it tends to not have high and low spots.
On 8/4/2015 2:19 PM, -MIKE- wrote:
> On 8/4/15 11:44 AM, Leon wrote:
>> On 8/4/2015 11:22 AM, -MIKE- wrote:
>>> On 8/4/15 10:49 AM, Electric Comet wrote:
>>>> On Tue, 4 Aug 2015 09:26:27 -0500 Leon <lcb11211@swbelldotnet>
>>>> wrote:
>>>>
>>>>> Glue. When I inquired about replacement they indicated that the
>>>>> rubber tires last a very long time and it would probably be best
>>>>> to sent the wheels to Laguna or a local shop that services BS
>>>>> wheels.
>>>>
>>>> i would think if the saw is true and adjusted properly it would last
>>>> a long time
>>>>
>>>> but probably a video somewhere showing how to do it
>>>>
>>>
>>> There are videos on youtube showing it.
>>> It's not as difficult as you might think.
>>> I forget where I got my new tires but they had instructions to put the
>>> tires in very hot water for a few minutes. That helped them stretch to
>>> make it easier to get them on the wheel. When they cool off they
>>> tighten up on the wheel.
>>>
>>> Mine have no glue. The wheel has a "curbs" on the edges that hold the
>>> tire in place. However, I would think spray adhesive or rubber cement
>>> would work.
>>>
>>>
>> The HD Laguna series uses a "cut to length" piece of rubber. Since it
>> is not stretched it tends to not have high and low spots.
>
> Interesting. So they definitely must glue it on.
> What about stretching gives high and low spots?
>
>
If the stretch to fit round tire is not evenly stretched certain areas
will be stretched more than others. Those will end up as thin/low
spots. Ideally that will work itself out "if" the tire can equalize
around the wheel. BUT there are often problems with vibration after
stretching to fit a new tire if the tire is not evenly stretched around
the wheel.
On 8/3/2015 4:01 PM, Electric Comet wrote:
> On Mon, 3 Aug 2015 10:04:36 -0400
> "John Grossbohlin" <[email protected]> wrote:
>
>> This video popped up as an ad while I was on a news web site. Thought
>> it might be useful for folks... might not!
>
> the tires on my bandsaw can be replaced while still on the saw
> they just aren't as stout as those tires
>
> those look like the 80000 mile tire
>
And the rubber on the HD series Laguna are long strips of rubber, not a
circular piece.
On Mon, 3 Aug 2015 10:04:36 -0400
"John Grossbohlin" <[email protected]> wrote:
> This video popped up as an ad while I was on a news web site. Thought
> it might be useful for folks... might not!
the tires on my bandsaw can be replaced while still on the saw
they just aren't as stout as those tires
those look like the 80000 mile tire
On Tue, 4 Aug 2015 09:26:27 -0500
Leon <lcb11211@swbelldotnet> wrote:
> Glue. When I inquired about replacement they indicated that the
> rubber tires last a very long time and it would probably be best to
> sent the wheels to Laguna or a local shop that services BS wheels.
i would think if the saw is true and adjusted properly it would last a long time
but probably a video somewhere showing how to do it
On 8/4/15 10:49 AM, Electric Comet wrote:
> On Tue, 4 Aug 2015 09:26:27 -0500 Leon <lcb11211@swbelldotnet>
> wrote:
>
>> Glue. When I inquired about replacement they indicated that the
>> rubber tires last a very long time and it would probably be best
>> to sent the wheels to Laguna or a local shop that services BS
>> wheels.
>
> i would think if the saw is true and adjusted properly it would last
> a long time
>
> but probably a video somewhere showing how to do it
>
There are videos on youtube showing it.
It's not as difficult as you might think.
I forget where I got my new tires but they had instructions to put the
tires in very hot water for a few minutes. That helped them stretch to
make it easier to get them on the wheel. When they cool off they
tighten up on the wheel.
Mine have no glue. The wheel has a "curbs" on the edges that hold the
tire in place. However, I would think spray adhesive or rubber cement
would work.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
On 8/4/15 11:44 AM, Leon wrote:
> On 8/4/2015 11:22 AM, -MIKE- wrote:
>> On 8/4/15 10:49 AM, Electric Comet wrote:
>>> On Tue, 4 Aug 2015 09:26:27 -0500 Leon <lcb11211@swbelldotnet>
>>> wrote:
>>>
>>>> Glue. When I inquired about replacement they indicated that the
>>>> rubber tires last a very long time and it would probably be best
>>>> to sent the wheels to Laguna or a local shop that services BS
>>>> wheels.
>>>
>>> i would think if the saw is true and adjusted properly it would last
>>> a long time
>>>
>>> but probably a video somewhere showing how to do it
>>>
>>
>> There are videos on youtube showing it.
>> It's not as difficult as you might think.
>> I forget where I got my new tires but they had instructions to put the
>> tires in very hot water for a few minutes. That helped them stretch to
>> make it easier to get them on the wheel. When they cool off they
>> tighten up on the wheel.
>>
>> Mine have no glue. The wheel has a "curbs" on the edges that hold the
>> tire in place. However, I would think spray adhesive or rubber cement
>> would work.
>>
>>
> The HD Laguna series uses a "cut to length" piece of rubber. Since it
> is not stretched it tends to not have high and low spots.
Interesting. So they definitely must glue it on.
What about stretching gives high and low spots?
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply