MDF needed in North Carolina

thanks for the lead....I have been looking around and have only found 3/4
inch stuff....too thick for my uses.

Cheers
John

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

[email protected] wrote:
> Since moving back from New Zealand 3 months ago, I have been busy
> re-outfitting my shop. I have gotten to the point where I am ready to start
> production but I can't find what I need. I need 1/8, 1/4 and 3/8 mdf
> sheets. Anybody know where I might find these around Charlotte? (I live
> outside HIckory.



Try Dixie Plywood
6000 Old Concord Rd
Charlotte, NC 28213
(704) 921-2299
http://www.dixieply.com/charlotte.shtml#products




--
Mortimer Schnerd, RN

[email protected]

A great wood source not too far from you:
The Hardwood Store
Gibsonville, NC
http://www.hardwoodstore.com/

They did stock various thicknesses of mdf - you can call them to check
out their supply - they be good people.

If you make the trip to Gibsonville, close by in Burlington is a large
Woodworkers Supply store.

Jim

[email protected] wrote:

>thanks for the lead....I have been looking around and have only found 3/4
>inch stuff....too thick for my uses.
>
>Cheers
>John
>
>----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
>http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
>----= East and West-Coast Server Farms - Total Privacy via Encryption =----
>
>

You could try Jackson International Corp.
Its a plywood specialty place here in Fuquay (Kind of a haul from where you
are)
but they pretty much have any type of ply you could ask for as well as mdf.

Great prices.

Ask for Robin Jackson - 919-577-9994



<[email protected]> wrote in message
news:[email protected]...
> Since moving back from New Zealand 3 months ago, I have been busy
> re-outfitting my shop. I have gotten to the point where I am ready to
> start
> production but I can't find what I need. I need 1/8, 1/4 and 3/8 mdf
> sheets. Anybody know where I might find these around Charlotte? (I live
> outside HIckory.
>
> TIA
> John "The Toymaker"
>
> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
> News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
> Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption
> =----

On Fri, 01 Jul 2005 10:37:41 GMT, Jim Wheeler <[email protected]>
wrote:

>A great wood source not too far from you:
>The Hardwood Store
>Gibsonville, NC
>http://www.hardwoodstore.com/
>
>They did stock various thicknesses of mdf - you can call them to check
>out their supply - they be good people.
>
>If you make the trip to Gibsonville, close by in Burlington is a large
>Woodworkers Supply store.
>
>Jim
Last I saw, the Hardwood Store only had 3/4 inch thick MDF. If they
have thinner stuff please let us know.

TWS

Home Depot, Lowes, as well as real lumberyards sell MDF.
Jim
<[email protected]> wrote in message
news:[email protected]...
> Since moving back from New Zealand 3 months ago, I have been busy
> re-outfitting my shop. I have gotten to the point where I am ready to
start
> production but I can't find what I need. I need 1/8, 1/4 and 3/8 mdf
> sheets. Anybody know where I might find these around Charlotte? (I live
> outside HIckory.
>
> TIA
> John "The Toymaker"
>
> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption
=----