A while back I needed to cut some narrow lines in stucco and Googled for
diamond burrs. I found lots but this one...
http://www.lopacki.com/burrs/
had a large variety at *very* good prices (IMO). The shipping was quick and
very inexpensive too, couple of bucks or less as I remember.
--
dadiOH
____________________________
dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico
Smitty Two wrote:
> In article <[email protected]>,
> "dadiOH" <[email protected]> wrote:
>
>> A while back I needed to cut some narrow lines in stucco and Googled
>> for diamond burrs. I found lots but this one...
>>
>> http://www.lopacki.com/burrs/
>>
>> had a large variety at *very* good prices (IMO). The shipping was
>> quick and very inexpensive too, couple of bucks or less as I
>> remember.
>
> Thanks, but rather than providing a link, wouldn't it have been easier
> to just buy a few burrs for each of your a.h.r. homies?
I have a couple of used ones I'll sell :)
--
dadiOH
____________________________
dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico
On 2/20/2011 10:19 AM, Smitty Two wrote:
> In article<[email protected]>,
> "dadiOH"<[email protected]> wrote:
>
>> A while back I needed to cut some narrow lines in stucco and Googled for
>> diamond burrs. I found lots but this one...
>>
>> http://www.lopacki.com/burrs/
>>
>> had a large variety at *very* good prices (IMO). The shipping was quick and
>> very inexpensive too, couple of bucks or less as I remember.
>
> Thanks, but rather than providing a link, wouldn't it have been easier
> to just buy a few burrs for each of your a.h.r. homies?
Now you have to change your handle to "Smitty Too". ^_^
TDD
I'm in for a couple. You can send them here, at home.
--
Christopher A. Young
Learn more about Jesus
www.lds.org
.
"Smitty Two" <[email protected]> wrote in message
news:[email protected]...
Thanks, but rather than providing a link, wouldn't it have
been easier
to just buy a few burrs for each of your a.h.r. homies?
In article <[email protected]>,
"dadiOH" <[email protected]> wrote:
> A while back I needed to cut some narrow lines in stucco and Googled for
> diamond burrs. I found lots but this one...
>
> http://www.lopacki.com/burrs/
>
> had a large variety at *very* good prices (IMO). The shipping was quick and
> very inexpensive too, couple of bucks or less as I remember.
Thanks, but rather than providing a link, wouldn't it have been easier
to just buy a few burrs for each of your a.h.r. homies?