This might be a little off-topic for this group but I'm guessing I am
not the first to encounter this. We are finishing the master bath in
our new home and I'm working on the whirlpool tub surround. The tub
deck is covered with porcelain tile that has been grouted with latex
fortified grout. I have installed a decorative trim around the
surround leaving a grout gap of about 1/4" between tile and the oak
trim.
Question is: Should I use the tile grout in this area or a latex tub/
tile caulk? I think the grout would look good between the wood and
tile but I'm concerned about staining the wood and the grout cracking.
Thanks for suggestions.
RonB
On Mar 31, 11:47=A0am, RonB <[email protected]> wrote:
> This might be a little off-topic for this group but I'm guessing I am
> not the first to encounter this. =A0We are finishing the master bath in
> our new home and I'm working on the whirlpool tub surround. =A0The tub
> deck is covered with porcelain tile that has been grouted with latex
> fortified grout. =A0I have installed a decorative trim around the
> surround leaving a grout gap of about 1/4" between tile and the oak
> trim.
>
> Question is: Should I use the tile grout in this area or a latex tub/
> tile caulk? =A0I think the grout would look good between the wood and
> tile but I'm concerned about staining the wood and the grout cracking.
>
> Thanks for suggestions.
>
> RonB
The wood *will* expand & contract and the grout will fail. Caulk.
On Tue, 31 Mar 2009 08:47:13 -0700 (PDT), RonB <[email protected]>
wrote:
>This might be a little off-topic for this group but I'm guessing I am
>not the first to encounter this. We are finishing the master bath in
>our new home and I'm working on the whirlpool tub surround. The tub
>deck is covered with porcelain tile that has been grouted with latex
>fortified grout. I have installed a decorative trim around the
>surround leaving a grout gap of about 1/4" between tile and the oak
>trim.
>
>Question is: Should I use the tile grout in this area or a latex tub/
>tile caulk? I think the grout would look good between the wood and
>tile but I'm concerned about staining the wood and the grout cracking.
>
>Thanks for suggestions.
>
>RonB
...there are "grout-like" products that will help you in this
situation...Custom (which HD carries) makes a squeeze-tube "Polyblend
Ceramic Tile Caulk" formulated for use around tubs and countertops. It
has a texture like hard grout, but will afford the flexibility needed
between dissimilar surfaces. If you use hard grout it will crack
along the wood edge. Make sure your wood is sealed and finished REAL
good.
cg
Limp Arbor wrote:
>> Question is: Should I use the tile grout in this area or a latex tub/
>> tile caulk? I think the grout would look good between the wood and
>> tile but I'm concerned about staining the wood and the grout cracking.
>>
>> Thanks for suggestions.
>>
>> RonB
>
> The wood *will* expand & contract and the grout will fail. Caulk.
What he said. I've had great success with this stuff...
http://www.idealtruevalue.com/servlet/the-52116/Detail
The small aerosol can is great, because it is easy to get in and around
tight spaces, and gives you better control because you're holding it
down by the tip. Not having to constantly squeeze a trigger, alone,
makes it worth it.
Also, this stuff will NOT grow mold or fungus.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply