Could someone please provide me with what would be a standard height for
chair rail?
Also, when picture molding is installed below the chair rail is it normally
glued or nailed to the wall. On the horizontal pieces you could probably
hit a couple of studs, but on the vertical the chances of hitting a stud
would be very slim.
Thanks for any advice.
Jim
On Fri, 28 Oct 2005 14:09:33 GMT, "Jim Jacobs"
<[email protected]> wrote:
>Could someone please provide me with what would be a standard height for
>chair rail?
>
>Also, when picture molding is installed below the chair rail is it normally
>glued or nailed to the wall. On the horizontal pieces you could probably
>hit a couple of studs, but on the vertical the chances of hitting a stud
>would be very slim.
We always ask the customer but if no one tells us, we put it at 32".
As far as attaching the picture molding (and chair rail) we use yellow
glue and pins or nails depending on the size of the molding.
One thing to consider is that use of any adhesive will pull the paper
off the wall with the molding if you need to remove it when the
decorator changes her mind.
Mike O.
In article <[email protected]>, Jim
Jacobs <[email protected]> wrote:
> Could someone please provide me with what would be a standard height for
> chair rail?
>
> Also, when picture molding is installed below the chair rail is it normally
> glued or nailed to the wall. On the horizontal pieces you could probably
> hit a couple of studs, but on the vertical the chances of hitting a stud
> would be very slim.
>
> Thanks for any advice.
>
> Jim
>
>
Hi Jim,
I installed a small picture frames around our
DR beneath the chair rail about 15 years ago.
I used a brad nailer and a small bead of elmers.
I didn't want to use construction adhesive because
of the thickness/viscosity would be too hard
to work with with the relatively small molding I used.
I didn't woory about hitting studs. If your
molding is heavy, that would be more important.
To get a nice look, I think that it is nice
to apply a tiny bead of caulk around the outside
& inside, and also to have the paint color of the
molding a shade or two lighter/darker than
the wall color.
That's about all I know about decorating, but
it looks pretty good and has never fallen off!
The chair rail height should match your chairs,
somewhere in the 32-36 inch range most likely.
Lou
Jim Jacobs wrote:
> Could someone please provide me with what would be a standard height for
> chair rail?
>
> Also, when picture molding is installed below the chair rail is it normally
> glued or nailed to the wall. On the horizontal pieces you could probably
> hit a couple of studs, but on the vertical the chances of hitting a stud
> would be very slim.
>
> Thanks for any advice.
>
> Jim
>
>
Assuming the chair rail's purpose is decorative versus functional (i.e.
you're not really protecting the wall from chairs) 35" or 36" is a good
height. If you're using this effectively as the top of wainscoting/wall
frames, you may want to adjust it based on the ceiling height in the
room. In that case, 1/3 of the room height is a good rule of thumb.
~Mark.
"nospambob" <[email protected]> wrote in message
news:[email protected]...
>>> Didn't know there was an optimum distance other than need.<<<
I wouldn't think so, our old maple kitchen chairs hit the wall at 33 inches
but our more formal dinning room chairs hit at 40 inches. RM~
"Jim Jacobs" wrote in message
> Could someone please provide me with what would be a standard height for
> chair rail?
Generally somewhere around 32 - 36" ... measure your chairs and customize.
FWIW, in a new home I spec 36".
> Also, when picture molding is installed below the chair rail is it
normally
> glued or nailed to the wall. On the horizontal pieces you could probably
> hit a couple of studs, but on the vertical the chances of hitting a stud
> would be very slim.
Many installers around these parts use a construction adhesive like Liquid
Nails and no fasteners ... I generally ask them to do both where there is
any doubt.
--
www.e-woodshop.net
Last update: 10/22/05
On 28/10/2005 10:09 AM, Jim Jacobs wrote:
> Could someone please provide me with what would be a standard height for
> chair rail?
If it's to protect from char hitting wall, height of chair back.
If it's for aesthetics, probably the Golden mean, which for an 8' wall
would be about 36.5", for a 10' wall, about 46", etc.
Ours matched the height of the chairs, based on my ignorance at the
time. Didn't know there was an optimum distance other than need.
On Fri, 28 Oct 2005 14:09:33 GMT, "Jim Jacobs"
<[email protected]> wrote:
>Could someone please provide me with what would be a standard height for
>chair rail?