I have a white oak chest of drawers that purchased as
unfinished furniture about 15 years go. The only finish it
has had is several coats of good paste wax.
I would like to remove the wax and put a better finish on
it.
What are some good ways to de wax it and what clear finishes
would be best to use on something that previously had wax in
the bare wood?
If it were metal, cleaning it would be a no-brainer. How
much of a problem is the wax that has worked it's way into
the wood grain?
Rico
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
"Rico" <[email protected]> wrote in message
news:[email protected]...
> I have a white oak chest of drawers that purchased as
> unfinished furniture about 15 years go. The only finish it
> has had is several coats of good paste wax.
>
> I would like to remove the wax and put a better finish on
> it.
>
> What are some good ways to de wax it and what clear finishes
> would be best to use on something that previously had wax in
> the bare wood?
>
> If it were metal, cleaning it would be a no-brainer. How
> much of a problem is the wax that has worked it's way into
> the wood grain?
>
> Rico
>
Naphtha and a soft bristle brush should get it off and out of the pores.
On Fri, 3 Oct 2003 11:44:10 -0700, Rico <[email protected]> pixelated:
>I have a white oak chest of drawers that purchased as
>unfinished furniture about 15 years go. The only finish it
>has had is several coats of good paste wax.
>
>I would like to remove the wax and put a better finish on
>it.
>
>What are some good ways to de wax it and what clear finishes
>would be best to use on something that previously had wax in
>the bare wood?
Toothbrush or larger fine brush and mineral spirits to dewax.
Naphtha to finish dewaxing and rinse.
Then Waterlox to refinish.
>If it were metal, cleaning it would be a no-brainer. How
>much of a problem is the wax that has worked it's way into
>the wood grain?
A lot in the larger pores, not so much in the teensy ones
which the finish can span both physically and chemically.