So how good are Porter-Cable power tools?
I'm in need of a saw replacement and the local store has a deal going
on Porter-Cable. Buy the accessory kit for $99 and get a tool free.
I have an ancient jigsaw and circular saw and I need to replace one. I
am leaning towards jigsaw. It's not going to see heavy use or be used
for only straight cuts. Stricly for used for occasional home stuff.
Which is more useful? Jigsaw or circular saw.
I'm looking at the battery ones because I find them lighter and easier
to control. My hands aren't what they used to be with arthritis.
---
This email has been checked for viruses by AVG.
http://www.avg.com
I wouldn't buy PC. I don't think the value is there, and guys that have bo=
ught the tool sets have taken them back. Batteries are poor, as well as per=
formance.
If I was looking for an occasional tool and home use as you described, I wo=
uld start here
http://www.homedepot.com/p/Ryobi-ONE-18-Volt-Lithium-Ion-Compact-Drill-Driv=
er-Kit-P1811/205651590
because if you buy the drill, you get one of these (or other offerings)free=
:
http://www.homedepot.com/p/Ryobi-ONE-18-Volt-Orbital-Jig-Saw-Tool-Only-P523=
/204824014
http://www.homedepot.com/p/Ryobi-ONE-18-Volt-6-1-2-in-Cordless-Circular-Saw=
-Tool-Only-P507/205806375
So a nifty compact drill with two batteries and a charger, a case to wag it=
around in and a jig saw or circular saw.
I have used all of those tools and they work just fine. The 3 year warrant=
y from Ryobi is the same as PC, but I have used the Ryobi warranty and with=
proper registration Ryobi was on the spot with their warranty support.
I have several Ryobi tools in the community tool bag and they have now been=
around for about three years now and they are still going strong. The wea=
k spot on these is the batteries, but for occasional use they work well.
And now since Ryobi is coming out with so many other tools, you can expand =
your collection as needed. My electrician uses Ryobi tools a lot (drives a=
Mercedes panel van, uses Ryobi...) and he has a ton of their products like=
hand vacs, portable fans, and even an oscillating tool. He claims good se=
rvice out of them all. I have several myself, and it started with this:
http://www.homedepot.com/p/Ryobi-ONE-18-Volt-Lithium-Ion-Cordless-Super-Com=
bo-Kit-4-Piece-P883/203466914
Right now, you can get that kit for $129. I keep the recip saw around and =
use it a lot to saw an occasional hole, but also use it to trim trees, cut =
up heavy cardboard packing, and all kinds of other stuff. Even LIGHT demo.=
The circular saw has plenty of power for occasional 2x4s, and even small =
rips on plywood.
I bought that same set for an emergency repair when I knew I couldn't get a=
cross town in heavy traffic and back to the job in time to get the job done=
. I liked the feel of the tools and the fact they did quite well on the re=
pair, so I didn't take them back after using them. They are still in servi=
ce.
Robert
On Fri, 09 Jun 2017 12:31:20 -0400, Casper <[email protected]>
wrote:
>I've got an ancient corded Craftsman jigsaw but it is very heavy and,
>now with my hand problems, hard to control or use for long.
>
>I looked at several corded/cordless models and most new units seem
>close in weight. Porter-Cable one has a low profile light battery.
>Short battery, so shorter runtime but less weight.
You're the best judge of this. If you think it feels lighter, it is.
The handle configuration makes a difference too and it's quite
personal.
>I've used a circular saw 6-12 times in the last two decades. My
>original Skil was loaned out and never returned. A couple years ago I
>got an old metal Sears from family. It works but with diffculty.
>
>I'd like to make some things that will require curved and round cuts.
>However I may, on occasion, need to cut some straight lines. I was
>hoping I could find a jigsaw (or other) that would fit that need.
>
>All my other stuff I cut on a bandsaw. I rarely cut anything large,
>except this year I will need to cut some T-11 and some plywood. For
>that I may borrow or rent a tablesaw.
You're not going to want to cut T1-11 with a saber saw. I don't think
a table saw is the right tool, either. You'll have to moose the
panels around on the table. If you think the saw is heavy, you're not
going to like lifting a sheet of T1-11.
>Is Bosch that much better? I don't want to spend $200++ for something
>I will use occasionally. I'm not getting any younger and no one to
>pass down. I'll see who locally has Bosch and check them out.
I think it is. I couldn't believe the difference when I bought my
Bosch. Others can chime in on some of the others but I would nix PC
and anything from Sears.
>
>Any other brand worth looking at? I'll also check more corded units. I
>don't have a problem with cords, just weight.
Festool? <g>
I've got an ancient corded Craftsman jigsaw but it is very heavy and,
now with my hand problems, hard to control or use for long.
I looked at several corded/cordless models and most new units seem
close in weight. Porter-Cable one has a low profile light battery.
Short battery, so shorter runtime but less weight.
I've used a circular saw 6-12 times in the last two decades. My
original Skil was loaned out and never returned. A couple years ago I
got an old metal Sears from family. It works but with diffculty.
I'd like to make some things that will require curved and round cuts.
However I may, on occasion, need to cut some straight lines. I was
hoping I could find a jigsaw (or other) that would fit that need.
All my other stuff I cut on a bandsaw. I rarely cut anything large,
except this year I will need to cut some T-11 and some plywood. For
that I may borrow or rent a tablesaw.
Is Bosch that much better? I don't want to spend $200++ for something
I will use occasionally. I'm not getting any younger and no one to
pass down. I'll see who locally has Bosch and check them out.
Any other brand worth looking at? I'll also check more corded units. I
don't have a problem with cords, just weight.
---
This email has been checked for viruses by AVG.
http://www.avg.com
On 6/8/2017 9:38 AM, Scott Lurndal wrote:
> Leon <lcb11211@swbelldotnet> writes:
>
>> Depending on your skill level and expectations, it is hard to go wrong
>> with a Bosch jaw.
>
> Interesting contraction "jigsaw" -> "jaw".
>
> While I generally agree about the Bosch jigsaw, there's a little pot-metal
> plate that's part of the base tilting mechanism that has a propensity
> to break. Mine is currently awaiting time to search out a replacement
> part.
>
'~) Oops.
Leon <lcb11211@swbelldotnet> writes:
>Depending on your skill level and expectations, it is hard to go wrong
>with a Bosch jaw.
Interesting contraction "jigsaw" -> "jaw".
While I generally agree about the Bosch jigsaw, there's a little pot-metal
plate that's part of the base tilting mechanism that has a propensity
to break. Mine is currently awaiting time to search out a replacement
part.
On Thursday, June 29, 2017 at 8:45:43 PM UTC-5, [email protected] wrote:
> >bosch makes a good jigsaw and it is around 70 or so
>=20
> Bosch is good but not at $70.
Agree. At one time Bosch made the absolute best jig saw, but since they ar=
e all made in China now (and I haven't bought one in years) I couldn't say.=
However, the $70 model isn't the one you want.
I bought this one about 20 plus years ago, and I still can't kill it.
https://goo.gl/Njtm5F
It has been a great piece of equipment and has done everything from cabinet=
work to cutting 2X material on pergolas and gazebos. When I bought it the=
y were still USA made, and I paid a little over $200 buck for it then! I a=
ctually purchased it after reading many great posts about the saw right her=
e on the rec.
> Most brands have the Bosch bayonet system now, even Festool.
Yeah, that's the only way to go. When I got my Bosch it was pretty rare, b=
ut it forced me to rethink buying quality blades (all that was available) o=
ver the Vermont American, and other junk I was used to using. I bought a p=
ackage of the Bosch "Swiss filed" blades that were ground so pefectly that =
I started using them to cut formica as it didn't splinter the laminate.
Although the saw is quite a bit more ugly, it still performs as well as the=
day I got it.=20
Robert
On 6/8/2017 8:28 AM, Casper wrote:
> So how good are Porter-Cable power tools?
Not nearly as good as they used to be. And I do not think they have
ever been know for their jig saws. They used to build good sanders and
routers.
>
> I'm in need of a saw replacement and the local store has a deal going
> on Porter-Cable. Buy the accessory kit for $99 and get a tool free.
A good corded jig saw will cost you between $100-$200, Same for a
circular saw.
>
> I have an ancient jigsaw and circular saw and I need to replace one. I
> am leaning towards jigsaw. It's not going to see heavy use or be used
> for only straight cuts. Stricly for used for occasional home stuff.
> Which is more useful? Jigsaw or circular saw.
Well that answer is going to be hard to answer. I find both equally
useful. It all depends on what you want to do the most, cut straight
lines or curved lines.
>
> I'm looking at the battery ones because I find them lighter and easier
> to control. My hands aren't what they used to be with arthritis.
I find the corded less heavy. Did you compare with a battery in the
tool? If you are an occasional user you might find that a corded will
always be ready to go, providing you have electricity. Battery will
always need to be charged and will eventually fail. Newer technology
Li-Ion batteries tend to last quite a long time, relatively speaking,
and tend to hold a charge longer when not being used.
Depending on your skill level and expectations, it is hard to go wrong
with a Bosch jaw. If you want mostly straight cuts and feel you might
benefit from very straight cuts take a look at circular saws that run
along a track. Pricey but some rival a table saw with accuracy,
straightness of cut, and quality of cut.
As Nailshooter mentioned in an earlier post, Ridgid offers a life time
warranty on their power tools including the batteries if you are careful
whth registration of the product.
>
> ---
> This email has been checked for viruses by AVG.
> http://www.avg.com
>
On Thu, 08 Jun 2017 09:28:18 -0400, Casper <[email protected]>
wrote:
>So how good are Porter-Cable power tools?
>
>I'm in need of a saw replacement and the local store has a deal going
>on Porter-Cable. Buy the accessory kit for $99 and get a tool free.
The new PCs aren't what they used to be, IMO. There are much better
brands out there.
>I have an ancient jigsaw and circular saw and I need to replace one. I
>am leaning towards jigsaw. It's not going to see heavy use or be used
>for only straight cuts. Stricly for used for occasional home stuff.
>Which is more useful? Jigsaw or circular saw.
A *good* jig saw is really useful but I don't think it replaces a
circular saw, either. I've had several jig saws that could only cut
straight if I was trying to scroll. My Bosch is a really good one but
it's not cordless. I don't have a suggestion for an occasional use
jig cordless jig saw.
>I'm looking at the battery ones because I find them lighter and easier
>to control. My hands aren't what they used to be with arthritis.
Batteries aren't light, particularly something with enough juice for a
jig saw. Battery powered drills can be pretty light but I'd look
really hard at the saw. Make sure you put the battery in it when you
look (stores often don't have batteries on display).
On Thu, 29 Jun 2017 12:24:05 -0700, Electric Comet
<[email protected]> wrote:
>On Thu, 08 Jun 2017 09:28:18 -0400
>Casper <[email protected]> wrote:
>
>> So how good are Porter-Cable power tools?
>
>have no knowledge of capitalization or punctuation
>
>> I have an ancient jigsaw and circular saw and I need to replace one. I
>> am leaning towards jigsaw. It's not going to see heavy use or be used
>
>bosch makes a good jigsaw and it is around 70 or so
Bosch is good but not at $70.
>has quick change blades and other nice features like angle of attack
Most brands have the Bosch bayonet system now, even Festool.
"Casper" <[email protected]> wrote in message
news:[email protected]...
> I've got an ancient corded Craftsman jigsaw but it is very heavy and,
> now with my hand problems, hard to control or use for long.
>
> I looked at several corded/cordless models and most new units seem
> close in weight. Porter-Cable one has a low profile light battery.
> Short battery, so shorter runtime but less weight.
>
> I've used a circular saw 6-12 times in the last two decades. My
> original Skil was loaned out and never returned. A couple years ago I
> got an old metal Sears from family. It works but with diffculty.
>
> I'd like to make some things that will require curved and round cuts.
> However I may, on occasion, need to cut some straight lines. I was
> hoping I could find a jigsaw (or other) that would fit that need.
>
> All my other stuff I cut on a bandsaw. I rarely cut anything large,
> except this year I will need to cut some T-11 and some plywood. For
> that I may borrow or rent a tablesaw.
>
> Is Bosch that much better? I don't want to spend $200++ for something
> I will use occasionally. I'm not getting any younger and no one to
> pass down. I'll see who locally has Bosch and check them out.
>
> Any other brand worth looking at? I'll also check more corded units. I
> don't have a problem with cords, just weight.
For what you want and your useage I would beat a path to Harbor Freight.
You could get BOTH a saber and circle saw - cordless or corded - for well
under $100. There are those who say all HF tools are junk. There are those
who know not.
On Thu, 08 Jun 2017 09:28:18 -0400
Casper <[email protected]> wrote:
> So how good are Porter-Cable power tools?
have no knowledge of current quality
> I have an ancient jigsaw and circular saw and I need to replace one. I
> am leaning towards jigsaw. It's not going to see heavy use or be used
bosch makes a good jigsaw and it is around 70 or so
has quick change blades and other nice features like angle of attack