On Wednesday, June 15, 2016 at 11:29:25 AM UTC-5, dpb wrote:
> On 06/15/2016 8:54 AM, Bob Villa wrote:
> > On Wednesday, June 15, 2016 at 7:32:45 AM UTC-5, dpb wrote:
> >> On 06/15/2016 7:11 AM, Doug Miller wrote:
> >> ...
> >>
> >>> If you take the switch out, you can probably find some sort of part number on the switch itself;
> >>> searching online for that part number may be of help. Especially, try Grainger and DigiKey.
> >>
> >> Jameco and/or Mouser are far better choices than Grainger...
> ...
>
> > I tend to agree about Grainger...when I was in facility maintenance I
> > bought a 3/4 HP induction motor from them, later I saw that our local
> > Fleet Farm had the same motor for $75 less than Grainger! (No
> > shipping charge factored)
>
> Grainger w/o a vendor discount is about as pricey as it gets other than,
> perhaps, McMaster-Carr. But, my recommendation was based on simply the
> much larger selection of manufacturers and components from the
> electronic supply folks who specialize instead of just a (relatively)
> small number from which to choose...
>
> And, of course, as another poster follow-up says, as long as the switch
> has at least as high current rating as the original, "if it fits..."
> (oh, that was in some other context, wasn't it??? :) )
>
> --
...and, of course, we had an account as a multi-million dollar healthcare organization with Grainger.
Doug Miller <[email protected]> wrote in
news:[email protected]:
> [email protected] wrote in
> news:[email protected]:
>
>> Can anyone tell me where I can get the switch for my model 3134
>> and don't tell me the factory...tried that to no avail. They
>> don't even have a manual parts break down for it...lol
>>
>
> If you take the switch out, you can probably find some sort of part
> number on the switch itself; searching online for that part number may
> be of help. Especially, try Grainger and DigiKey.
>
You may want to try a smaller electronics site like Goldmine Electronics
or All Electronics. They display pictures as a big part of their
catalog, and it may be easier to match up an unknown switch to a picture
of a similar item, then go looking for one that matches the details of
the switch.
No affiliation with either company, they just use a different approach to
their catalog I felt may be useful.
Puckdropper
On Wednesday, June 15, 2016 at 7:32:45 AM UTC-5, dpb wrote:
> On 06/15/2016 7:11 AM, Doug Miller wrote:
> ...
>
> > If you take the switch out, you can probably find some sort of part number on the switch itself;
> > searching online for that part number may be of help. Especially, try Grainger and DigiKey.
>
> Jameco and/or Mouser are far better choices than Grainger...
>
> The local ACE has a pretty good selection of replacement handtool
> switches to choose from...
>
> --
I tend to agree about Grainger...when I was in facility maintenance I bought a 3/4 HP induction motor from them, later I saw that our local Fleet Farm had the same motor for $75 less than Grainger! (No shipping charge factored)
[email protected] wrote in
news:[email protected]:
> Can anyone tell me where I can get the switch for my model 3134
> and don't tell me the factory...tried that to no avail. They
> don't even have a manual parts break down for it...lol
>
If you take the switch out, you can probably find some sort of part number on the switch itself;
searching online for that part number may be of help. Especially, try Grainger and DigiKey.
On 06/15/2016 7:11 AM, Doug Miller wrote:
...
> If you take the switch out, you can probably find some sort of part number on the switch itself;
> searching online for that part number may be of help. Especially, try Grainger and DigiKey.
Jameco and/or Mouser are far better choices than Grainger...
The local ACE has a pretty good selection of replacement handtool
switches to choose from...
--
On Wed, 15 Jun 2016 04:44:55 -0700 (PDT)
[email protected] wrote:
> Can anyone tell me where I can get the switch for my model 3134 and
what happened to the switch
why not attempt repair first
if not matching your switch is not hard with the parametric
searches on the good parts sites
On 6/15/16 7:32 AM, dpb wrote:
> On 06/15/2016 7:11 AM, Doug Miller wrote:
> ...
>
>> If you take the switch out, you can probably find some sort of part
>> number on the switch itself;
>> searching online for that part number may be of help. Especially, try
>> Grainger and DigiKey.
>
> Jameco and/or Mouser are far better choices than Grainger...
>
> The local ACE has a pretty good selection of replacement handtool
> switches to choose from...
>
> --
Yes. That switch is not unique to the manufacturer.
Grizzly also has a fair selection of switches. Some of the switches
that have bigger housings with large paddles on them actually contain a
smaller switch that might be the same as your saw's.
Grizzly has specs for their switches that usually include the make/model
of the actual switch as well as their dimensions and electrical ratings.
As long as the switch has the same ratings and will fit in the switch
mount for your saw, it can be used.
http://www.grizzly.com/search/?q=(switches)
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
On 06/15/2016 8:54 AM, Bob Villa wrote:
> On Wednesday, June 15, 2016 at 7:32:45 AM UTC-5, dpb wrote:
>> On 06/15/2016 7:11 AM, Doug Miller wrote:
>> ...
>>
>>> If you take the switch out, you can probably find some sort of part number on the switch itself;
>>> searching online for that part number may be of help. Especially, try Grainger and DigiKey.
>>
>> Jameco and/or Mouser are far better choices than Grainger...
...
> I tend to agree about Grainger...when I was in facility maintenance I
> bought a 3/4 HP induction motor from them, later I saw that our local
> Fleet Farm had the same motor for $75 less than Grainger! (No
> shipping charge factored)
Grainger w/o a vendor discount is about as pricey as it gets other than,
perhaps, McMaster-Carr. But, my recommendation was based on simply the
much larger selection of manufacturers and components from the
electronic supply folks who specialize instead of just a (relatively)
small number from which to choose...
And, of course, as another poster follow-up says, as long as the switch
has at least as high current rating as the original, "if it fits..."
(oh, that was in some other context, wasn't it??? :) )
--
On 06/15/2016 12:55 PM, Bob Villa wrote:
> On Wednesday, June 15, 2016 at 11:29:25 AM UTC-5, dpb wrote:
...
>> Grainger w/o a vendor discount is about as pricey as it gets other than,
>> perhaps, McMaster-Carr. ...
>
> ...had an account as a multi-million dollar healthcare organization with Grainger.
With that on the application, the organization probably got a 50%
additional rider before the 20% discount... :)
--