"Bill" wrote:
> Ship-building saws, huh? Where's Lew?
--------------------------------------------
Have seen a couple of these in action actually building boats.
Impressive.
----------------------------------------------
"Bill" wrote:
> By the way, the city of South Bend Indiana gets its name because
> it's near the south bend of the St. Joseph River. It's actually
> very near the Indiana/Michigan border.
----------------------------------------------
And a total PITA to get to if you are starting from either Chicago
or Cleveland.
Lew
On 4/15/2014 4:55 PM, Swingman wrote:
> On 4/15/2014 4:24 PM, woodchucker wrote:
>> Look like excellent condition...
>> Bill it's in your area.....
>> DAMN, wish I had room , money , and ......
>> http://southbend.craigslist.org/tls/4422914862.html
>
> No kidding ... but I'd have to build a shop twice the size.
>
> Good thing they aren't branded "Festool", Leon would have one for sure. ;)
>
I already own the Ferrari of BS's I don need a "Semi".
"Swingman" wrote in message
news:[email protected]...
>On 4/15/2014 4:24 PM, woodchucker wrote:
>> Look like excellent condition...
>> Bill it's in your area.....
>> DAMN, wish I had room , money , and ......
>> http://southbend.craigslist.org/tls/4422914862.html
>No kidding ... but I'd have to build a shop twice the size.
Yeah... my 36" Crescent is too tall for my shop so I put an addition on my
wood shed... the saw was the cheap part.
John
On 4/15/2014 4:24 PM, woodchucker wrote:
> Look like excellent condition...
> Bill it's in your area.....
> DAMN, wish I had room , money , and ......
> http://southbend.craigslist.org/tls/4422914862.html
No kidding ... but I'd have to build a shop twice the size.
Good thing they aren't branded "Festool", Leon would have one for sure. ;)
--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://www.google.com/+eWoodShop
https://plus.google.com/+KarlCaillouet/posts
http://www.custommade.com/by/ewoodshop/
KarlCaillouet@ (the obvious)
"Morgans" wrote in message news:[email protected]...
> Those look to be direct drive motors. I did not know that ilk existed.
There are lots of them on old machines... take a look at the photos on
http://vintagemachinery.org/home.aspx!
John
On 4/15/2014 5:05 PM, John Grossbohlin wrote:
> "Swingman" wrote in message
> news:[email protected]...
>
>> On 4/15/2014 4:24 PM, woodchucker wrote:
>>> Look like excellent condition...
>>> Bill it's in your area.....
>>> DAMN, wish I had room , money , and ......
>>> http://southbend.craigslist.org/tls/4422914862.html
>
>> No kidding ... but I'd have to build a shop twice the size.
>
> Yeah... my 36" Crescent is too tall for my shop so I put an addition on
> my wood shed... the saw was the cheap part.
Nice drive by ... You suck! ;)
--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://www.google.com/+eWoodShop
https://plus.google.com/+KarlCaillouet/posts
http://www.custommade.com/by/ewoodshop/
KarlCaillouet@ (the obvious)
"John Grossbohlin" wrote in message
news:[email protected]...
"Swingman" wrote in message
news:[email protected]...
>On 4/15/2014 5:05 PM, John Grossbohlin wrote:
> "Swingman" wrote in message
> news:[email protected]...
>
>>> On 4/15/2014 4:24 PM, woodchucker wrote:
>>>> Look like excellent condition...
>>>> Bill it's in your area.....
>>>> DAMN, wish I had room , money , and ......
>>>> http://southbend.craigslist.org/tls/4422914862.html
>
>>> No kidding ... but I'd have to build a shop twice the size.
>>
>> Yeah... my 36" Crescent is too tall for my shop so I put an addition on
>> my wood shed... the saw was the cheap part.
>Nice drive by ... You suck! ;)
>When something is deemed a necessity it's a necessity. Anything stopping
>you from doing the same? ;~)
Just noticed they have a new classified area on
http://vintagemachinery.org/classifieds/ads.aspx
That is an improvement!
woodchucker wrote:
> Look like excellent condition...
> Bill it's in your area.....
> DAMN, wish I had room , money , and ......
> http://southbend.craigslist.org/tls/4422914862.html
Thanks Jeff. It looks perfect for the guy who needs to have the
"biggest one"! The price is right! One better hope they throw in a few
blades.
Ship-building saws, huh? Where's Lew?
By the way, the city of South Bend Indiana gets its name because it's
near the south bend of the St. Joseph River. It's actually very near
the Indiana/Michigan border.
Bill
"Lew Hodgett" <[email protected]> wrote
> Have seen a couple of these in action actually building boats.
>
> Impressive.
Those look to be direct drive motors. I did not know that ilk existed.
If only...
--
Jim in NC
---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com
"Swingman" wrote in message
news:[email protected]...
>On 4/15/2014 5:05 PM, John Grossbohlin wrote:
> "Swingman" wrote in message
> news:[email protected]...
>
>>> On 4/15/2014 4:24 PM, woodchucker wrote:
>>>> Look like excellent condition...
>>>> Bill it's in your area.....
>>>> DAMN, wish I had room , money , and ......
>>>> http://southbend.craigslist.org/tls/4422914862.html
>
>>> No kidding ... but I'd have to build a shop twice the size.
>>
>> Yeah... my 36" Crescent is too tall for my shop so I put an addition on
>> my wood shed... the saw was the cheap part.
>Nice drive by ... You suck! ;)
When something is deemed a necessity it's a necessity. Anything stopping
you from doing the same? ;~)