I'm a woodworking hobbyist who is interested in forming curved shapes
in wood with the aid of a steam pipe. This seems to be a common and
ordinary technique, according to my research.
Obviously, the size and shape of the "pipe" varies according to the
specific situation, and that's fine. But my question is: How do I
get the steam??? I see online products for laundry steam irons
(probably too small) and saunas (surely too large and VERY expensive).
What sort of steam generator would a hobbyist use to form curved wood
pieces? Is this something that I must cobble up on my own (maybe by
appropriating my turkey fryer?) or is there something that will do the
job for me?
Any advice is greatly appreciated!
Tue, Feb 19, 2008, 3:05am (EST-3) [email protected] doth claimeth:
I'm a woodworking hobbyist who is interested in forming curved shapes in
wood with the aid of a steam pipe. This seems to be a common and
ordinary technique, according to my research. <snip> But my question is:
How do I get the steam??? <snip>
I do not believe that if you had actually done your research, you
do not already have your answer. I do not believe I have 'ever' read a
piece on how to steam bend wood that did not tell how to get steam.
JOAT
10 Out Of 10 Terrorists Prefer Hillary For President - Bumper Sticker
I do not have a problem with a woman president - except for Hillary.
Lee Valley has a 4-part, DIY article on steam bending that is excellent.
It answers this and many more questions:
http://www.leevalley.com/wood/page.aspx?page=43626
Michael Latcha - at home in Redford, MI
<[email protected]> wrote in message
news:5eed9e24-ff72-4211-be12-b06610a0da45@e25g2000prg.googlegroups.com...
> I'm a woodworking hobbyist who is interested in forming curved shapes
> in wood with the aid of a steam pipe. This seems to be a common and
> ordinary technique, according to my research.
>
> Obviously, the size and shape of the "pipe" varies according to the
> specific situation, and that's fine. But my question is: How do I
> get the steam??? I see online products for laundry steam irons
> (probably too small) and saunas (surely too large and VERY expensive).
>
> What sort of steam generator would a hobbyist use to form curved wood
> pieces? Is this something that I must cobble up on my own (maybe by
> appropriating my turkey fryer?) or is there something that will do the
> job for me?
>
> Any advice is greatly appreciated!
[email protected] wrote:
> I'm a woodworking hobbyist who is interested in forming curved shapes
> in wood with the aid of a steam pipe. This seems to be a common and
> ordinary technique, according to my research.
>
> Obviously, the size and shape of the "pipe" varies according to the
> specific situation, and that's fine. But my question is: How do I
> get the steam??? I see online products for laundry steam irons
> (probably too small) and saunas (surely too large and VERY expensive).
>
> What sort of steam generator would a hobbyist use to form curved wood
> pieces? Is this something that I must cobble up on my own (maybe by
> appropriating my turkey fryer?) or is there something that will do the
> job for me?
>
> Any advice is greatly appreciated!
You can buy steam by the bag at most good woodworking stores. I've not
found much difference between the brands, but others may have their
preferences.
electric (no flame in shop) hotplate and teakettle.
jc
<[email protected]> wrote in message
news:5eed9e24-ff72-4211-be12-b06610a0da45@e25g2000prg.googlegroups.com...
> I'm a woodworking hobbyist who is interested in forming curved shapes
> in wood with the aid of a steam pipe. This seems to be a common and
> ordinary technique, according to my research.
>
> Obviously, the size and shape of the "pipe" varies according to the
> specific situation, and that's fine. But my question is: How do I
> get the steam??? I see online products for laundry steam irons
> (probably too small) and saunas (surely too large and VERY expensive).
>
> What sort of steam generator would a hobbyist use to form curved wood
> pieces? Is this something that I must cobble up on my own (maybe by
> appropriating my turkey fryer?) or is there something that will do the
> job for me?
>
> Any advice is greatly appreciated!
On 19 Feb, 11:05, [email protected] wrote:
> How do I get the steam???
Here in the UK I use a =A320 steam wallpaper stripper (Earlex have
lasted me the best).
<http://www.earlex.co.uk/html/steam_html/ss100.htm>
2 or 3kW electric heater, enough water for about an hour and they even
supply a steamproof hose.
NB - Use plastic pipe, not steel! You'll get staining otherwise, even
with galvanised.
http://www.woodmagazine.com/wood/story.jsp?catref=cat5610002&storyid=/templatedata/wood/story/data/1167776675349.xml
[email protected] wrote:
> I'm a woodworking hobbyist who is interested in forming curved shapes
> in wood with the aid of a steam pipe. This seems to be a common and
> ordinary technique, according to my research.
>
> Obviously, the size and shape of the "pipe" varies according to the
> specific situation, and that's fine. But my question is: How do I
> get the steam??? I see online products for laundry steam irons
> (probably too small) and saunas (surely too large and VERY expensive).
>
> What sort of steam generator would a hobbyist use to form curved wood
> pieces? Is this something that I must cobble up on my own (maybe by
> appropriating my turkey fryer?) or is there something that will do the
> job for me?
>
> Any advice is greatly appreciated!
<[email protected]> wrote in message
news:5eed9e24-ff72-4211-be12-b06610a0da45@e25g2000prg.googlegroups.com...
> I'm a woodworking hobbyist who is interested in forming curved shapes
> in wood with the aid of a steam pipe. This seems to be a common and
> ordinary technique, according to my research.
>
> Obviously, the size and shape of the "pipe" varies according to the
> specific situation, and that's fine. But my question is: How do I
> get the steam??? I see online products for laundry steam irons
> (probably too small) and saunas (surely too large and VERY expensive).
>
> What sort of steam generator would a hobbyist use to form curved wood
> pieces? Is this something that I must cobble up on my own (maybe by
> appropriating my turkey fryer?) or is there something that will do the
> job for me?
>
> Any advice is greatly appreciated!
Any electric kettle with the thermostat taped on and with a hose connecting
to the pipe.
[email protected] wrote:
> I'm a woodworking hobbyist who is interested in forming curved shapes
> in wood with the aid of a steam pipe. This seems to be a common and
> ordinary technique, according to my research.
>
> Obviously, the size and shape of the "pipe" varies according to the
> specific situation, and that's fine. But my question is: How do I
> get the steam??? I see online products for laundry steam irons
> (probably too small) and saunas (surely too large and VERY expensive).
>
> What sort of steam generator would a hobbyist use to form curved wood
> pieces? Is this something that I must cobble up on my own (maybe by
> appropriating my turkey fryer?) or is there something that will do the
> job for me?
>
> Any advice is greatly appreciated!
I used one many years ago that used a round 3 gallon gas can, setting on
a outdoor burner, with a radiator hose connected to the spout and pipe.
The spout was just the right size to wedge the hose over. I haven't
seen the old fashioned cans in a long time, maybe try a farm store. The
newer safety cans could probably be modified fairly easy. I suggest you
don't try using one that has had gas in it.
--
Bill B.
http://home.comcast.net/~bberg100
"Life should not be a journey to the grave with the intention of
arriving safely in a pretty and well preserved body, but rather to skid
in broadside, thoroughly used up, totally worn out, and loudly
proclaiming, 'WOW! What A RIDE!!" ... Unknown
On Feb 19, 6:05 am, [email protected] wrote:
> I'm a woodworking hobbyist who is interested in forming curved shapes
> in wood with the aid of a steam pipe. This seems to be a common and
> ordinary technique, according to my research.
>
> Obviously, the size and shape of the "pipe" varies according to the
> specific situation, and that's fine. But my question is: How do I
> get the steam??? I see online products for laundry steam irons
> (probably too small) and saunas (surely too large and VERY expensive).
>
> What sort of steam generator would a hobbyist use to form curved wood
> pieces? Is this something that I must cobble up on my own (maybe by
> appropriating my turkey fryer?) or is there something that will do the
> job for me?
>
> Any advice is greatly appreciated!
You need an uninterrupted heat source. I use a Fisher burner
connected to a gas line that heats a large tea kettle (a $2 Goodwill
item). An electric burner should work sell too. Propane tanks are
not so good as they can deplete. Most of my steaming takes about an
hour or a little more. Protect your hands and get a pair of leather
gloves. BBQ tongs can be helpful. Your materials for steaming should
not be expensive at all.
On Feb 19, 6:05 am, [email protected] wrote:
> I'm a woodworking hobbyist who is interested in forming curved shapes
> in wood with the aid of a steam pipe. This seems to be a common and
> ordinary technique, according to my research.
>
> Obviously, the size and shape of the "pipe" varies according to the
> specific situation, and that's fine. But my question is: How do I
> get the steam??? I see online products for laundry steam irons
> (probably too small) and saunas (surely too large and VERY expensive).
>
> What sort of steam generator would a hobbyist use to form curved wood
> pieces? Is this something that I must cobble up on my own (maybe by
> appropriating my turkey fryer?) or is there something that will do the
> job for me?
>
> Any advice is greatly appreciated!
You can use pretty much any heat source. If it's got a flame, do it
outdoors.
R