I want to know what the word "wollerd" or its permutations might mean.
Tom
Mike Marlow wrote:
> "Don Dando" <[email protected]> wrote in message
> news:[email protected]...
> > It is possible that the pulley may be made of diecast metal (many were on
> > Sears saws) and is wollerd (SP) out. Hence each time it is used it moves
> > about and loosens the set screw. I believe I'd try to locate a cast iron
> or
> > machined steel pulley and see if this doesn't correct the problem.
> >
> > Don Dando
> >
> >
>
> Hey Don - a question... why do you change the subject line on these threads?
> Are you aware that when you do that you start a new thread and the
> continuity of the thread is lost? That makes the archive process about
> useless for anyone who may ever try to follow this in the future. You'd be
> doing everyone a favor if you stuck to the conventions built into your
> newsreader and simply replied to the thread.
>
> --
>
> -Mike-
> [email protected]
tom wrote:
> I want to know what the word "wollerd" or its permutations might mean.
> Tom
Here's one that possibly originated during the great
depression: A woller for a dollar.
> Mike Marlow wrote:
>> "Don Dando" <speedlin
[email protected]> wrote in message
>> news:[email protected]...
>> > It is possible that the pulley may be made of diecast metal (many were on
>> > Sears saws) and is wollerd (SP) out. Hence each time it is used it moves
>> > about and loosens the set screw. I believe I'd try to locate a cast iron
>> or
>> > machined steel pulley and see if this doesn't correct the problem.
>> >
>> > Don Dando
>> >
--
Gerald Ross
Cochran, GA
After all is said and done, usually
more is said than done.
----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
"Mike Marlow" <[email protected]> wrote in message
news:[email protected]...
>>
>
> Hey Don - a question... why do you change the subject line on these
> threads?
> Are you aware that when you do that you start a new thread and the
> continuity of the thread is lost? That makes the archive process about
> useless for anyone who may ever try to follow this in the future. You'd
> be
> doing everyone a favor if you stuck to the conventions built into your
> newsreader and simply replied to the thread.
You are wasting you time trying to get a response out of him.
"Don Dando" <[email protected]> wrote in message
news:[email protected]...
> It is possible that the pulley may be made of diecast metal (many were on
> Sears saws) and is wollerd (SP) out. Hence each time it is used it moves
> about and loosens the set screw. I believe I'd try to locate a cast iron
or
> machined steel pulley and see if this doesn't correct the problem.
>
> Don Dando
>
>
Hey Don - a question... why do you change the subject line on these threads?
Are you aware that when you do that you start a new thread and the
continuity of the thread is lost? That makes the archive process about
useless for anyone who may ever try to follow this in the future. You'd be
doing everyone a favor if you stuck to the conventions built into your
newsreader and simply replied to the thread.
--
-Mike-
[email protected]
It's redneck for "wallowed", meaning moved around aimlessly. Could probaby
be wallered or wallered.
The ship wallowed sickenly in the swell when it lost power.
The hogs wallowed (this is a good place for wollered) around in the pen and
made a big mudhole.
Wth quill on the drillpress was bad, so the bit wallowed out an oversized
hole.
Wilson
"tom" <[email protected]> wrote in message
news:[email protected]...
>I want to know what the word "wollerd" or its permutations might mean.
> Tom
> Mike Marlow wrote:
>> "Don Dando" <[email protected]> wrote in message
>> news:[email protected]...
>> > It is possible that the pulley may be made of diecast metal (many were
>> > on
>> > Sears saws) and is wollerd (SP) out. Hence each time it is used it
>> > moves
>> > about and loosens the set screw. I believe I'd try to locate a cast
>> > iron
>> or
>> > machined steel pulley and see if this doesn't correct the problem.
>> >
>> > Don Dando
>> >
>> >
>>
>> Hey Don - a question... why do you change the subject line on these
>> threads?
>> Are you aware that when you do that you start a new thread and the
>> continuity of the thread is lost? That makes the archive process about
>> useless for anyone who may ever try to follow this in the future. You'd
>> be
>> doing everyone a favor if you stuck to the conventions built into your
>> newsreader and simply replied to the thread.
>>
>> --
>>
>> -Mike-
>> [email protected]
>
On Sat, 4 Nov 2006 04:10:20 -0500, "Mike Marlow" <[email protected]>
wrote:
>
>Hey Don - a question... why do you change the subject line on these threads?
>Are you aware that when you do that you start a new thread and the
>continuity of the thread is lost? That makes the archive process about
>useless for anyone who may ever try to follow this in the future. You'd be
>doing everyone a favor if you stuck to the conventions built into your
>newsreader and simply replied to the thread.
He probably is following the conventions, for the "New Post (or
Message)" button. <G>
FWIW, this is why I last ~ 10 minutes on web forums. As much
information as Woodcentral's forums probably have, I lose interest
when half of the replies change subject.