I'm planning to design and build a collapsible or knock-down panel saw
so I can store it in minimal space when not in use. I'll be using what
I think are the superior features of various designs making sturdiness
and quick assembly/disassembly a priority.
The capacity I have in mind is: 10' x 5' to accommodate 10' x 4' and 5'
x 5'. I want to be able to cut Baltic Birch plywood, MDF, plywood,
pegboard, and particle board.
I'd like to know what dimensions beyond 10' x 5' I ought to consider as
I design this. This would be for woodworking only. Would the more
experienced woodworkers here recommend a capacity larger than 10' x 5'?
I do not have much experience with material that comes in sheets or
panels and do not want to learn after the fact that I should have
designed this to accommodate a larger dimension since such and such
material only comes in sizes, say, 6' x 6'. The panel saw at Home Depot
looks like it can handle very large panels so I wonder what material
comes in sizes beyond 10' x 4' and 5' x 5'.
John
"John L. Poole" <[email protected]> wrote in message
news:[email protected]...
> I'm planning to design and build a collapsible or knock-down panel saw
> so I can store it in minimal space when not in use. I'll be using what
> I think are the superior features of various designs making sturdiness
> and quick assembly/disassembly a priority.
>
> The capacity I have in mind is: 10' x 5' to accommodate 10' x 4' and 5'
> x 5'. I want to be able to cut Baltic Birch plywood, MDF, plywood,
> pegboard, and particle board.
>
> I'd like to know what dimensions beyond 10' x 5' I ought to consider as
> I design this. This would be for woodworking only. Would the more
> experienced woodworkers here recommend a capacity larger than 10' x 5'?
> I do not have much experience with material that comes in sheets or
> panels and do not want to learn after the fact that I should have
> designed this to accommodate a larger dimension since such and such
> material only comes in sizes, say, 6' x 6'. The panel saw at Home Depot
> looks like it can handle very large panels so I wonder what material
> comes in sizes beyond 10' x 4' and 5' x 5'.
>
> John
All the right questions, but I might suggest that the best panel saw is no
panel saw. I've used plenty of panel saws and never found one that was
more universally capable or easier to use than laying a piece of sheet goods
down on a pair of saw horses or on a foam sheet on the floor and clamping a
straight edge to guide a circular saw. I'd really encourage you to think
about why you really want a panel saw. They are not one of the more useful
shop tools and you'll probably end up with your circular saw and a straight
edge on any given project anyway. I'd submit that there is nothing a panel
saw will do for you, or offer, that one of the two approaches I've already
mentioned won't do.
--
-Mike-
[email protected]
John L. Poole (in [email protected])
said:
| I'm planning to design and build a collapsible or knock-down panel
| saw so I can store it in minimal space when not in use. I'll be
| using what I think are the superior features of various designs
| making sturdiness and quick assembly/disassembly a priority.
|
| The capacity I have in mind is: 10' x 5' to accommodate 10' x 4'
| and 5' x 5'. I want to be able to cut Baltic Birch plywood, MDF,
| plywood, pegboard, and particle board.
|
| I'd like to know what dimensions beyond 10' x 5' I ought to
| consider as I design this. This would be for woodworking only.
| Would the more experienced woodworkers here recommend a capacity
| larger than 10' x 5'? I do not have much experience with
| material that comes in sheets or panels and do not want to learn
| after the fact that I should have designed this to accommodate a
| larger dimension since such and such material only comes in sizes,
| say, 6' x 6'. The panel saw at Home Depot looks like it can handle
| very large panels so I wonder what material comes in sizes beyond
| 10' x 4' and 5' x 5'.
John...
I've seen 4' x 16' Extira panels advertized; but I think your 5' x 10'
capacity is adequate for more than 99% of all panel cutting.
I haven't taken time to update the web page for quite a while - but
you're welcome to borrow any ideas you find at the link below (to a 6'
tall by 10' wide bolt-together panel saw project).
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/panel_saw
I hav posted a "Store Away Panel Saw Station" on ABPW.
--------------------------------------------------------------------------
"John L. Poole" <[email protected]> wrote in message
news:[email protected]...
> I'm planning to design and build a collapsible or knock-down panel saw so
> I can store it in minimal space when not in use. I'll be using what I
> think are the superior features of various designs making sturdiness and
> quick assembly/disassembly a priority.
>
> The capacity I have in mind is: 10' x 5' to accommodate 10' x 4' and 5' x
> 5'. I want to be able to cut Baltic Birch plywood, MDF, plywood,
> pegboard, and particle board.
>
> I'd like to know what dimensions beyond 10' x 5' I ought to consider as I
> design this. This would be for woodworking only. Would the more
> experienced woodworkers here recommend a capacity larger than 10' x 5'? I
> do not have much experience with material that comes in sheets or panels
> and do not want to learn after the fact that I should have designed this
> to accommodate a larger dimension since such and such material only comes
> in sizes, say, 6' x 6'. The panel saw at Home Depot looks like it can
> handle very large panels so I wonder what material comes in sizes beyond
> 10' x 4' and 5' x 5'.
>
> John
FEIN skillsaw may be the better approach and about the same cost. Maybe
less. And, certainly less demanding of shop space while affording far more
versatility for the buck. And, you can say you own a FEIN saw!
"Tom H" <[email protected]> wrote in message
news:[email protected]...
>I hav posted a "Store Away Panel Saw Station" on ABPW.
>
>
> --------------------------------------------------------------------------
> "John L. Poole" <[email protected]> wrote in message
> news:[email protected]...
>> I'm planning to design and build a collapsible or knock-down panel saw so
>> I can store it in minimal space when not in use. I'll be using what I
>> think are the superior features of various designs making sturdiness and
>> quick assembly/disassembly a priority.
>>
>> The capacity I have in mind is: 10' x 5' to accommodate 10' x 4' and 5' x
>> 5'. I want to be able to cut Baltic Birch plywood, MDF, plywood,
>> pegboard, and particle board.
>>
>> I'd like to know what dimensions beyond 10' x 5' I ought to consider as I
>> design this. This would be for woodworking only. Would the more
>> experienced woodworkers here recommend a capacity larger than 10' x 5'? I
>> do not have much experience with material that comes in sheets or panels
>> and do not want to learn after the fact that I should have designed this
>> to accommodate a larger dimension since such and such material only comes
>> in sizes, say, 6' x 6'. The panel saw at Home Depot looks like it can
>> handle very large panels so I wonder what material comes in sizes beyond
>> 10' x 4' and 5' x 5'.
>>
>> John
>
>