PrimeCell battery rebuilding

In article <[email protected]>,
My Old Tools <[email protected]> wrote:
>My Dewalt packs were cut open at the joint where they enter the drill. They
>have come apart twice each so far. I just re-glue them. They do hold a
>charge well.

With your post as inspiration, I looked more carefully and in better
light. My pack was indeed cut open - about 1/4" below the place where
the pack transitions to the drill handle. It looks to be a very smooth
narrow cut - more like a sharp blade than a Dremel cutting wheel. There
isn't any glue visible.

>Ross
>www.myoldtools.com
>"Henry E Schaffer" <[email protected]> wrote in message
>news:[email protected]...
>> I sent a won't-hold-charge battery for my Bosch 12V cordless drill to
>> PrimeCell for rebuilding. It came back quickly, and after charging
>> seems to be working fine. (I'll have to run through several
>> use/recharge cycles to see more.)
>>
>> But the interesting thing is that I couldn't see anything on the case
>> indicating that it was opened! It certainly wasn't cut open with a
>> Dremel.
>> --
>> --henry schaffer
--
--henry schaffer
[email protected]

My Dewalt packs were cut open at the joint where they enter the drill. They
have come apart twice each so far. I just re-glue them. They do hold a
charge well.

--
Ross
www.myoldtools.com
"Henry E Schaffer" <[email protected]> wrote in message
news:[email protected]...
> I sent a won't-hold-charge battery for my Bosch 12V cordless drill to
> PrimeCell for rebuilding. It came back quickly, and after charging
> seems to be working fine. (I'll have to run through several
> use/recharge cycles to see more.)
>
> But the interesting thing is that I couldn't see anything on the case
> indicating that it was opened! It certainly wasn't cut open with a
> Dremel.
> --
> --henry schaffer
> [email protected]