In article <[email protected]>, Mark & Juanita
<[email protected]> wrote:
> On Sat, 06 Jan 2007 18:51:12 GMT, "Edwin Pawlowski" <[email protected]> wrote:
>
> >
> >"Bewildered" <[email protected]> wrote in message
> >news:[email protected]...
> >>
> >> <[email protected]> wrote in message
> >> news:[email protected]...
> >>> It's a crime against Nature to leave fine woodworking equipment in this
> >>> condition:
> >>>
> >>> http://tinyurl.com/vqrxx
> >>>
> >> A joke of somesort?
> >
> >Try the second URL he posted.
> >http://i44.photobucket.com/albums/f4/dhakala/top14.jpg
> >
> >I'd certainly never have a shop that looked like that. In fact, I'm heading
> >out right now to make sure it does not happen.
> >
>
> So, when did Keeter get the 12" jointer?
You owe me a keyboard!
<[email protected]> wrote in message
news:[email protected]...
>
> Mark Jerde wrote:
>
>> <Chuckle> I should have mentioned my office is a special case, SWMBO
>> would
>> clean it if I let her. But with 4 computers, 5 monitors, 2 printers (one
>> for 24" wide paper) , 3 UPSs, phones & networking there are seemingly
>> miles
>> of wires & cables running all over the place. It's easy to mess
>> something
>> up with the vacuum cleaner and I insist being the only person to clean my
>> office. ;-)
>
> You forgot to mention the air conditioner. That's not an office, it's a
> sauna! :-)
>
Yup, I had two new 20A circuits installed last summer. One for the
kornfuters, the other for a window AC sized to cool 2x my square feet but
barely able to keep up in my office.
Fortunately my computer programming pays the bills and lets me make sawdust.
;-) It doesn't get much better than that, huh?
-- Mark
Doug Miller wrote:
> In article <[email protected]>, "[email protected]" <[email protected]> wrote:
> >It's a crime against Nature to leave fine woodworking equipment in this
> >condition:
> >
> > <snip nonworking URL>
> >
> You are not logged in or you do not have permission to access this page.
Oops. Here's a public copy:
http://i44.photobucket.com/albums/f4/dhakala/top14.jpg
Edwin Pawlowski wrote:
> "Burgy" <[email protected]> wrote in message
> news:[email protected]...
> > Don't know how you find anything in that mess! lol
> >
>
> I just figured out why it is so clean. Upon a second look, I see he has PVC
> duct collection piping. He got it all together and realized, once he uses
> any tool, static electricity is going to blow up his shop and house.
I don't think so. He's using the neutral on his 220-volt feed.
Mike Richardson wrote:
> Am I mis understanding the machinery? How do you get a 6 foot by say 2"
> thick length thru the thicknesser/planer? Doesnt the bed rise and fall, and
> thus invite conflict with the height of the table?
I agree about this problem, but it may be due to the camera angle.
The assembly/work table might be lower than 2" from the planer bed.
Or, he might never need more than an 1". Who knows, what's going on
in that shop - I don't see any wood storage at all!
MJ Wallace
[email protected] wrote:
> Oops. Here's a public copy:
>
> http://i44.photobucket.com/albums/f4/dhakala/top14.jpg
Wow, either he set up that shop purely for show, or he has far too much
time on his hands.
I'm hoping he spent a weekend cleaning it up for the photo and then
went back to doing work..
bf wrote:
> [email protected] wrote:
> > Oops. Here's a public copy:
> >
> > http://i44.photobucket.com/albums/f4/dhakala/top14.jpg
>
> Wow, either he set up that shop purely for show, or he has far too much
> time on his hands.
>
> I'm hoping he spent a weekend cleaning it up for the photo and then
> went back to doing work..
My nephew's neighbour has a dozen high-end guitars and can't play a
lick.
Nothing would surprise me.
Mark Jerde wrote:
> "dondone" <[email protected]> wrote in message
> news:[email protected]...
> > New research shows neatfreaks are not nearly as efficient as "clean it
> > later" workers. It's the result I have been waiting my whole life for
> > since I am married to a neatfreak who now understands that her domain
> > stops at my shop front door.
>
> LOL! My wife was just up in my office, saying it needed to be vacuumed.
>
> Glad *y'all* were able to come to an understanding. I've only been married
> 24 years, maybe ours will come too.... ;-)
Geez, it was about 24 years ago that Ann Landers published the Final
Answer to all such disputes:
"A home should be clean enough to be healthy and messy enough to be
comfortable."
Mark Jerde wrote:
> <Chuckle> I should have mentioned my office is a special case, SWMBO would
> clean it if I let her. But with 4 computers, 5 monitors, 2 printers (one
> for 24" wide paper) , 3 UPSs, phones & networking there are seemingly miles
> of wires & cables running all over the place. It's easy to mess something
> up with the vacuum cleaner and I insist being the only person to clean my
> office. ;-)
You forgot to mention the air conditioner. That's not an office, it's a
sauna! :-)
Is that a workshop or an operating room ????
<[email protected]> wrote in message
news:[email protected]...
>
> Doug Miller wrote:
>> In article <[email protected]>,
>> "[email protected]" <[email protected]> wrote:
>> >It's a crime against Nature to leave fine woodworking equipment in this
>> >condition:
>> >
>> > <snip nonworking URL>
>> >
>> You are not logged in or you do not have permission to access this page.
>
> Oops. Here's a public copy:
>
> http://i44.photobucket.com/albums/f4/dhakala/top14.jpg
>
[email protected] wrote:
> Doug Miller wrote:
>> In article <[email protected]>,
>> "[email protected]" <[email protected]> wrote:
>>> It's a crime against Nature to leave fine woodworking equipment in
>>> this condition:
>>>
>>> <snip nonworking URL>
>>>
>> You are not logged in or you do not have permission to access this
>> page.
>
> Oops. Here's a public copy:
>
> http://i44.photobucket.com/albums/f4/dhakala/top14.jpg
Holy Crap! That's terrible. Who's shop is it? I think some of us need to
visit him and fix things up!
I'm gonna go load up my truck. ;)
S
B A R R Y wrote:
> The pipes run vertically, as to direct the explosion up and out of
> roof stacks. This is the only safe method for PVC dust collection.
When I tell "fibs" to kids I wink while telling them so they'll know
that what I'm saying is probably not "the gospel truth". You
need to add an "emoticon" with statements like that - maybe
; )
If you don't some poor newbie will be cutting holes in his shop
roof and redoing his PVC ducting. If he'd used ABS that wouldn't
have been necessary ; )
charlie b
Don't know how you find anything in that mess! lol
<[email protected]> wrote in message
news:[email protected]...
>
> Doug Miller wrote:
>> In article <[email protected]>,
>> "[email protected]" <[email protected]> wrote:
>> >It's a crime against Nature to leave fine woodworking equipment in this
>> >condition:
>> >
>> > <snip nonworking URL>
>> >
>> You are not logged in or you do not have permission to access this page.
>
> Oops. Here's a public copy:
>
> http://i44.photobucket.com/albums/f4/dhakala/top14.jpg
>
--------------------------------------------------------------------------------
I am using the free version of SPAMfighter for private users.
It has removed 3822 spam emails to date.
Paying users do not have this message in their emails.
Try SPAMfighter for free now!
On Sat, 6 Jan 2007 11:39:14 -0800, surfnturf <[email protected]> wrote:
>Dosent look as though any work gets done there
He needs "Helen Buttagig" for workshops! <G>
On Sat, 06 Jan 2007 18:51:12 GMT, "Edwin Pawlowski" <[email protected]> wrote:
>
>"Bewildered" <[email protected]> wrote in message
>news:[email protected]...
>>
>> <[email protected]> wrote in message
>> news:[email protected]...
>>> It's a crime against Nature to leave fine woodworking equipment in this
>>> condition:
>>>
>>> http://tinyurl.com/vqrxx
>>>
>> A joke of somesort?
>
>Try the second URL he posted.
>http://i44.photobucket.com/albums/f4/dhakala/top14.jpg
>
>I'd certainly never have a shop that looked like that. In fact, I'm heading
>out right now to make sure it does not happen.
>
So, when did Keeter get the 12" jointer?
+--------------------------------------------------------------------------------+
If you're gonna be dumb, you better be tough
+--------------------------------------------------------------------------------+
"Bewildered" <[email protected]> wrote in message
news:[email protected]...
>
> <[email protected]> wrote in message
> news:[email protected]...
>> It's a crime against Nature to leave fine woodworking equipment in this
>> condition:
>>
>> http://tinyurl.com/vqrxx
>>
> A joke of somesort?
Try the second URL he posted.
http://i44.photobucket.com/albums/f4/dhakala/top14.jpg
I'd certainly never have a shop that looked like that. In fact, I'm heading
out right now to make sure it does not happen.
That's not a wood shop, it's a friggin museum. Where is the tour guide?
Ed Walsh wrote:
> Is that a workshop or an operating room ????
> <[email protected]> wrote in message
> news:[email protected]...
>
>>Doug Miller wrote:
>>
>>>In article <[email protected]>,
>>>"[email protected]" <[email protected]> wrote:
>>>
>>>>It's a crime against Nature to leave fine woodworking equipment in this
>>>>condition:
>>>>
>>>><snip nonworking URL>
>>>>
>>>You are not logged in or you do not have permission to access this page.
>>
>>Oops. Here's a public copy:
>>
>>http://i44.photobucket.com/albums/f4/dhakala/top14.jpg
>>
>
>
>
Am I mis understanding the machinery? How do you get a 6 foot by say 2"
thick length thru the thicknesser/planer? Doesnt the bed rise and fall, and
thus invite conflict with the height of the table?
"Burgy" <[email protected]> wrote in message
news:[email protected]...
> Don't know how you find anything in that mess! lol
>
> <[email protected]> wrote in message
> news:[email protected]...
>>
>> Doug Miller wrote:
>>> In article <[email protected]>,
>>> "[email protected]" <[email protected]> wrote:
>>> >It's a crime against Nature to leave fine woodworking equipment in this
>>> >condition:
>>> >
>>> > <snip nonworking URL>
>>> >
>>> You are not logged in or you do not have permission to access this page.
>>
>> Oops. Here's a public copy:
>>
>> http://i44.photobucket.com/albums/f4/dhakala/top14.jpg
>>
>
> --------------------------------------------------------------------------------
> I am using the free version of SPAMfighter for private users.
> It has removed 3822 spam emails to date.
> Paying users do not have this message in their emails.
> Try SPAMfighter for free now!
>
>
<[email protected]> wrote in message
news:[email protected]...
>
> Mark Jerde wrote:
>> "dondone" <[email protected]> wrote in message
>> news:[email protected]...
>> > New research shows neatfreaks are not nearly as efficient as "clean it
>> > later" workers. It's the result I have been waiting my whole life for
>> > since I am married to a neatfreak who now understands that her domain
>> > stops at my shop front door.
>>
>> LOL! My wife was just up in my office, saying it needed to be vacuumed.
>>
>> Glad *y'all* were able to come to an understanding. I've only been
>> married
>> 24 years, maybe ours will come too.... ;-)
>
> Geez, it was about 24 years ago that Ann Landers published the Final
> Answer to all such disputes:
>
> "A home should be clean enough to be healthy and messy enough to be
> comfortable."
<Chuckle> I should have mentioned my office is a special case, SWMBO would
clean it if I let her. But with 4 computers, 5 monitors, 2 printers (one
for 24" wide paper) , 3 UPSs, phones & networking there are seemingly miles
of wires & cables running all over the place. It's easy to mess something
up with the vacuum cleaner and I insist being the only person to clean my
office. ;-)
-- Mark
"Burgy" <[email protected]> wrote in message
news:[email protected]...
> Don't know how you find anything in that mess! lol
>
I just figured out why it is so clean. Upon a second look, I see he has PVC
duct collection piping. He got it all together and realized, once he uses
any tool, static electricity is going to blow up his shop and house.
"dondone" <[email protected]> wrote in message
news:[email protected]...
> New research shows neatfreaks are not nearly as efficient as "clean it
> later" workers. It's the result I have been waiting my whole life for
> since I am married to a neatfreak who now understands that her domain
> stops at my shop front door.
LOL! My wife was just up in my office, saying it needed to be vacuumed.
Glad *y'all* were able to come to an understanding. I've only been married
24 years, maybe ours will come too.... ;-)
-- Mark
Mark Jerde wrote:
> "dondone" <[email protected]> wrote in message
> news:[email protected]...
>> New research shows neatfreaks are not nearly as efficient as "clean it
>> later" workers. It's the result I have been waiting my whole life for
>> since I am married to a neatfreak who now understands that her domain
>> stops at my shop front door.
>
> LOL! My wife was just up in my office, saying it needed to be vacuumed.
>
> Glad *y'all* were able to come to an understanding. I've only been married
> 24 years, maybe ours will come too.... ;-)
>
> -- Mark
>
>
its Norms new shop every thing is nailed (braded) down
just Me
On Sun, 07 Jan 2007 02:43:59 GMT, "Edwin Pawlowski" <[email protected]>
wrote:
>I just figured out why it is so clean. Upon a second look, I see he has PVC
>duct collection piping. He got it all together and realized, once he uses
>any tool, static electricity is going to blow up his shop and house.
The pipes run vertically, as to direct the explosion up and out of
roof stacks. This is the only safe method for PVC dust collection.
On Sun, 07 Jan 2007 08:21:23 -0800, charlie b <[email protected]>
wrote:
>
> If you don't some poor newbie will be cutting holes in his shop
> roof and redoing his PVC ducting.
I did all that for nothing? ;^)
In article <[email protected]>, "[email protected]" <[email protected]> wrote:
>It's a crime against Nature to leave fine woodworking equipment in this
>condition:
>
>http://tinyurl.com/vqrxx
>
You are not logged in or you do not have permission to access this page. This
could be due to one of several reasons:
1. You are not logged in. Fill in the form at the bottom of this page and
try again.
2. You may not have sufficient privileges to access this page. Are you
trying to edit someone else's post, access administrative features or some
other privileged system?
3. If you are trying to post, the administrator may have disabled your
account, or it may be awaiting activation.
--
Regards,
Doug Miller (alphageek at milmac dot com)
It's time to throw all their damned tea in the harbor again.
<[email protected]> wrote in message
news:[email protected]...
> It's a crime against Nature to leave fine woodworking equipment in this
> condition:
>
> http://tinyurl.com/vqrxx
>
A joke of somesort?
On 6 Jan 2007 10:14:56 -0800, [email protected] wrote:
> Doug Miller wrote:
>> In article <[email protected]>, "[email protected]" <[email protected]> wrote:
>>>It's a crime against Nature to leave fine woodworking equipment in this
>>>condition:
>>>
>>> <snip nonworking URL>
>>>
>> You are not logged in or you do not have permission to access this page.
>
> Oops. Here's a public copy:
>
> http://i44.photobucket.com/albums/f4/dhakala/top14.jpg
Dosent look as though any work gets done there
On Sat, 06 Jan 2007 21:25:17 GMT, B A R R Y <[email protected]>
wrote:
>On Sat, 6 Jan 2007 11:39:14 -0800, surfnturf <[email protected]> wrote:
>
>>Dosent look as though any work gets done there
>
>He needs "Helen Buttagig" for workshops! <G>
Sorry, I meant REVERSE "Helen Buttagig"!
Somebody needs to toss some dust and scraps around!
"Robatoy" <[email protected]> wrote in message
news:[email protected]...
>
> Edwin Pawlowski wrote:
> > "Burgy" <[email protected]> wrote in message
> > news:[email protected]...
> > > Don't know how you find anything in that mess! lol
> > >
> >
> > I just figured out why it is so clean. Upon a second look, I see he has
PVC
> > duct collection piping. He got it all together and realized, once he
uses
> > any tool, static electricity is going to blow up his shop and house.
>
> I don't think so. He's using the neutral on his 220-volt feed.
>
IS that in the code for PVC dust collection piping? If so, please cite?
;) at Mr Miller
New research shows neatfreaks are not nearly as efficient as "clean it
later" workers. It's the result I have been waiting my whole life for since
I am married to a neatfreak who now understands that her domain stops at my
shop front door.
<[email protected]> wrote in message
news:[email protected]...
> It's a crime against Nature to leave fine woodworking equipment in this
> condition:
>
> http://tinyurl.com/vqrxx
>
"[email protected]" <[email protected]> writes:
> It's a crime against Nature to leave fine woodworking equipment in this
> condition:
>
> http://tinyurl.com/vqrxx
Note: Requires one to register to view the picture. I didn't.
--
Sending unsolicited commercial e-mail to this account incurs a fee of
$500 per message, and acknowledges the legality of this contract.