Warning labels

Tue, Sep 2, 2003, 8:37pm [email protected] (JPEracing) claims:
<snip> What I`d like to do is finish off the machine with some
appropriate warning labels. <snip>

No prob. Make your own.
http://www.speedysigns.com/lettering/lettering_tool.asp

JOAT
No sense in being pessimistic - it wouldn't work anyway.

Life just ain't life without good music. - JOAT
Web Page Update 2 Sep 2003. Some tunes I like.
http://community-2.webtv.net/Jakofalltrades/SOMETUNESILIKE/

Finally a question I can answer. I am a new woodworker so I mostly ask
questions or read the answers. I have been in the sign business for
awhile and my advice would be to find a local signshop with a printer
called the Gerber Edge. They will be able to make any decals you want.
All they will need is the context of the text and the amount of space
you have to work with.
Bob

Look at these folks. They have label stock and a web based application
that allows you to design and print your own "permanent/water proof"
labels using a laser printer. I've used it for my water processing
system and to mark all of the gases that I have plumbed in my shop.

Phil

http://www.electromark.com/

JPEracing wrote:
> Am in the final steps of rebuilding a PM 160 planer for my shop.
> What I`d like to do is finish off the machine with some appropriate warning
> labels.
> PM was able to supply the racing stripe tape, an American flag and an
> infeed/outfeed plate. But that`s about it.
> Looking for say, " Danger Cutterhead" or "Danger High Voltage". Anything
> that might be of relevance. Without going overboard.
> Any sources ? Or advice on what labels to use ?
>
>

"Leon" <[email protected]> writes:

>"JPEracing" <[email protected]> wrote in message
>news:[email protected]...
>> Am in the final steps of rebuilding a PM 160 planer for my shop.
>> What I`d like to do is finish off the machine with some appropriate
>warning
>> labels.
>> PM was able to supply the racing stripe tape, an American flag and an
>> infeed/outfeed plate. But that`s about it.
>> Looking for say, " Danger Cutterhead" or "Danger High Voltage". Anything
>> that might be of relevance. Without going overboard.
>> Any sources ? Or advice on what labels to use ?
>>
>
>I would add a label saying, "Keepa you hands off..!!!"
>

And if it is on a mobile base, add one that says "Unplug Me First!".

scott

Powermatic wouldn't help? I thought the basic label law mandated unlimited
replacement, sort of like auto companies being obliged to replace smog
control stuff forever. Without a label or warning, there's greater
liability

You say your shop, which means you don't _have_ to have them. If it's a
workplace, you would. I'd look at the newer machines and use the "Danger,
Cutterhead" and such labels they have on them.

"JPEracing" <[email protected]> wrote in message
news:[email protected]...
> Am in the final steps of rebuilding a PM 160 planer for my shop.
> What I`d like to do is finish off the machine with some appropriate
warning
> labels.
> PM was able to supply the racing stripe tape, an American flag and an
> infeed/outfeed plate. But that`s about it.
> Looking for say, " Danger Cutterhead" or "Danger High Voltage". Anything
> that might be of relevance. Without going overboard.
> Any sources ? Or advice on what labels to use ?
>
>

In article <[email protected]>,
JPEracing <[email protected]> wrote:
>Am in the final steps of rebuilding a PM 160 planer for my shop.
>What I`d like to do is finish off the machine with some appropriate warning
>labels.
>PM was able to supply the racing stripe tape, an American flag and an
>infeed/outfeed plate. But that`s about it.
>Looking for say, " Danger Cutterhead" or "Danger High Voltage". Anything
>that might be of relevance. Without going overboard.
>Any sources ? Or advice on what labels to use ?
>
>

It won't be 'original equipment', but:

+---------------------------+
| |
| DANGER!!! |
| |
| This Device Contains |
| Electromagentically |
| Active Parts |
| |
| Refer ALL operations |
| to a competent |
| technician |
| |
| DANGER!!! |
| |
+---------------------------+


You can do simply *amazing* things with 'dry transfer' sheets, designed to
be run through a laser printer.

In article <[email protected]>,
Larry Jaques <jake@di\/ersify.com> wrote:
>On Wed, 3 Sep 2003 01:55:50 +0000 (UTC), [email protected]
>(Robert Bonomi) pixelated:
>
>>In article <[email protected]>,
>>JPEracing <[email protected]> wrote:
>>>Am in the final steps of rebuilding a PM 160 planer for my shop.
>>>What I`d like to do is finish off the machine with some appropriate warning
>>>labels.
>>>PM was able to supply the racing stripe tape, an American flag and an
>>>infeed/outfeed plate. But that`s about it.
>>>Looking for say, " Danger Cutterhead" or "Danger High Voltage". Anything
>>>that might be of relevance. Without going overboard.
>>>Any sources ? Or advice on what labels to use ?
>>>
>>>
>>
>>It won't be 'original equipment', but:
>>
>> +---------------------------+
>> | |
>> | DANGER!!! |
>> | |
>> | This Device Contains |
>> | Electromagentically |
>> | Active Parts |
>> | |
>> | Refer ALL operations |
>> | to a competent |
>> | technician |
>> | |
>> | DANGER!!! |
>> | |
>> +---------------------------+
>>
>>
>>You can do simply *amazing* things with 'dry transfer' sheets, designed to
>>be run through a laser printer.
>
>And what about the ElectroBlackically, ElectroCyanically, and
>ElectroYellowically Active Parts, sir? You only covered magenta.
>This IS a CMYK sign, is it not?

ROTFL My spell-checker didn't catch that one. Of course I meant
'electromagnetically'. *sigh*

Though, maybe, "just paint it pink, and nobody *else* will try to use it"
applies. <snicker>

"Leon" <[email protected]> wrote in message
news:[email protected]...
> I would add a label saying, "Keepa you hands off..!!!"

And one saying "Check for nails and foreign materials." We once had a
worker try to clean the cement off of old form lumber with the planer.
harrym

I would add a label saying, "Keepa you hands off..!!!"



"JPEracing" <[email protected]> wrote in message
news:[email protected]...
> Am in the final steps of rebuilding a PM 160 planer for my shop.
> What I`d like to do is finish off the machine with some appropriate
warning
> labels.
> PM was able to supply the racing stripe tape, an American flag and an
> infeed/outfeed plate. But that`s about it.
> Looking for say, " Danger Cutterhead" or "Danger High Voltage". Anything
> that might be of relevance. Without going overboard.
> Any sources ? Or advice on what labels to use ?
>
>

On Wed, 3 Sep 2003 01:55:50 +0000 (UTC), [email protected]
(Robert Bonomi) pixelated:

>In article <[email protected]>,
>JPEracing <[email protected]> wrote:
>>Am in the final steps of rebuilding a PM 160 planer for my shop.
>>What I`d like to do is finish off the machine with some appropriate warning
>>labels.
>>PM was able to supply the racing stripe tape, an American flag and an
>>infeed/outfeed plate. But that`s about it.
>>Looking for say, " Danger Cutterhead" or "Danger High Voltage". Anything
>>that might be of relevance. Without going overboard.
>>Any sources ? Or advice on what labels to use ?
>>
>>
>
>It won't be 'original equipment', but:
>
> +---------------------------+
> | |
> | DANGER!!! |
> | |
> | This Device Contains |
> | Electromagentically |
> | Active Parts |
> | |
> | Refer ALL operations |
> | to a competent |
> | technician |
> | |
> | DANGER!!! |
> | |
> +---------------------------+
>
>
>You can do simply *amazing* things with 'dry transfer' sheets, designed to
>be run through a laser printer.

And what about the ElectroBlackically, ElectroCyanically, and
ElectroYellowically Active Parts, sir? You only covered magenta.
This IS a CMYK sign, is it not?


-- Friends Don't Let Friends Eat Turkey and Drive --
http://diversify.com Website Programming and Development