I'm making shelves out of some beautiful tiger striped maple and have
them ready for finish work. I have been trying different finishes on
some maple scraps I have in the shop. I bought Jeff Jewett's "Great
Wood Finishes" and want to try mixing up a good varnish to finish the
shelves with.
>From his book - "The best all around finish I've found is 1 cup of
varnish, 1/3 cup of linseed oil and 1 cup of naphtha (which dries more
quickly than mineral spirits)."
Now, there is good info on how long oil or spar varnish should be used
for exterior work as it will expand and contract with the wood and that
for interior use short oil varnish should be used as it is a harder
finish. Additionally, manufacturers do not indicate the ratios of the
oil content specifically, but will show whether it is indoor or
exterior.
I've searched three different stores in the area (Southern NH) and only
found spar (long oil) varnish on the shelves. I finally remembered
Rockeller is a store I go to sometimes for other wood working supplies
so I stopped by there just now and noticed McCloskey Heirloom Oil Base
Varnish.
When I got home I read the back more completely and noticed that twice
in the instructions & other info - "Do Not Thin"
Why would they have this written on the back? As I understand it
Varnish is Varnish and it can be thinned for whatever we want to apply.
Is there something unique about this brand?
This is the first project of this level in quality I have created so I
want to make sure I am doing things correctly. With the trim work and
other carpentry I do, poly was good enough and was what I used mostly.
That's what I figured when I first saw it. Shortly after I posted this
I made the varnish mix and it's set to dry on a test peice right now.
I'll put another coat on in the morning to be sure how it appears to be
working and then likely move to my work peice. Seeing your reply
confirms my suspiscion.
It kinda threw me though. I've not mixed for my finish work ever
before and wondered if I was missing anything.
Thanks for the reply Greg.
Marc
Greg Esres wrote:
> <<When I got home I read the back more completely and noticed that
> twice in the instructions & other info - "Do Not Thin">>
>
> Most or all say that. From what I understand, it's there merely to
> make sure the VOC levels are within legal limits when sold. You may
> thin the product as you see fit.
if the varnish is anything but high gloss, make sure you stir
thoroughly before taking part of the contents of the can for thinning
as the flattening agent will settle to the bottom of the can. the
varnish will still work but the gloss won't be what you expected. for
the same reason, shake your mix frequently while using.
By the way - this project is coming out nicely... I did start with the
mixture mentioned in my initial post and put the first coat on and when
it was dry I sanded, wiped and I'm at the point of watching the second
coat dry. Well, I'm doing other things with my days besides watching
it dry, but you get the point.
It's really bringing out the waves in the maple. Can't wait to see
this one up on the wall.
Absolutely, shake the varnish frequently when using to give that hard to
beat non-skid finish!
<[email protected]> wrote in message
news:[email protected]...
> if the varnish is anything but high gloss, make sure you stir
> thoroughly before taking part of the contents of the can for thinning
> as the flattening agent will settle to the bottom of the can. the
> varnish will still work but the gloss won't be what you expected. for
> the same reason, shake your mix frequently while using.
>