In article <[email protected]>,
Never Enough Money <[email protected]> wrote:
> There's a 50-50 chance I'll be going to Japna this spring. If I do,
> where do I go to find the world class chisels and knives? I just
> thumbed through Lonely Planet (and the index, too) and didn't see any
> mention....
>
>
> Cheers and TIA.
In Tokyo the easiest (but not cheapest) is to go to Tokyo Hands in
Shibuya or Ikibukuro they will speak English but will have a small
Selection
http://www.tokyu-hands.co.jp/index.htm (Japanese)
http://en.wikipedia.org/wiki/Tokyu_Hands
However Joyful Honda has a much bigger selection byt speak little
English
The biggest near Tokyo is at Chiba New Town
http://www.joyfulhonda.com/map/map-chibant01.htm
Under toy will find some information from another Tokyo resident
http://www.joyfulhonda.com/map/map-moriya.htm
http://www.ablett.jp/workshop/joyful.htm
--
only replies to the news group please
Brian and Len, I can go where ever I want. The details of the trip
have not been planned. TThanks for the tips, though.
On Jan 30, 11:54 am, Brian Huffaker <[email protected]>
wrote:
> Never Enough Money <[email protected]> wrote:
>
> > There's a 50-50 chance I'll be going to Japna this spring. If I do,
> > where do I go to find the world class chisels and knives? I just
> > thumbed through Lonely Planet (and the index, too) and didn't see any
> > mention....
>
> Depends on where in Japan you're going. I liked this place in Osaka
>
> http://homepage2.nifty.com/togi/index.htm
>
> I've also heard that there are a lot of woodworking tools available in
> the Akasaka area from some Tokyo natives, but I don't get to Tokyo
> much.
>
> Brian Huffaker, DSWL
On Jan 29, 6:43 pm, "Never Enough Money" <[email protected]>
wrote:
> There's a 50-50 chance I'll be going to Japna this spring. If I do,
> where do I go to find the world class chisels and knives? I just
> thumbed through Lonely Planet (and the index, too) and didn't see any
> mention....
>
> Cheers and TIA.
I lived in Japan for 2 years. If I were going to Japan for a visit,
I'd spend my time sightseeing instead of looking for tools. The
language barrier constantly works against you. You'll be able to make
them understand that you want a chisel. Beyond that, communication is
difficult. Good tools aren't cheap over there either. Taxi fare
alone may eat any savings. Do your shopping with a reliable stateside
vendor by internet or catalog and enjoy your trip.
DonkeyHody
"Every man is my superior in that I can learn from him." - Thomas
Carlyle
Never Enough Money wrote:
> There's a 50-50 chance I'll be going to Japna this spring. If I do,
> where do I go to find the world class chisels and knives? I just
> thumbed through Lonely Planet (and the index, too) and didn't see any
> mention....
>
>
> Cheers and TIA.
>
Just on the off chance that you aren't entirely fluent with the
language, I'd like to suggest that you print out some pix of what you
are hoping to buy.
Bill
--
Make yourself an honest man, and then you may be sure that there is one
rascal less in the world.
Thomas Carlyle (1795 - 1881)
http://nmwoodworks.com
Couldn't tell you now. About twenty five years ago, a little shop just down
the road from my house, in Sagamihara, had or could get, about anything you
could want. Couldn't tell you how to get there but I could show you. Buy me
a ticket? :)
"Never Enough Money" <[email protected]> wrote in message
news:[email protected]...
> There's a 50-50 chance I'll be going to Japna this spring. If I do,
> where do I go to find the world class chisels and knives? I just
> thumbed through Lonely Planet (and the index, too) and didn't see any
> mention....
>
>
> Cheers and TIA.
>
Tokyu Hands is great, but it's really a hobby store on steroids. They have
a decent selection of chisels and other tools (and knives), but I'd guess
that they're more the consumer or hobbyist grade. That's about all I could
afford, but I've still retired most of my western hand tools for them.
If you'll be in the Tokyo area, there's a good hardware store in Sagamiono
about a mile from the station. I don't know the street name, but I could
get there from here. There's also a neat mom and pop in Tsuruma about 4
blocks from the station. I picked up a shoulder plane and a saw there last
trip, and they gave me a canvas tool bag the first time I was there. Again,
I couldn't really give directions, but if you spring for a ticket I'd be
glad to show you. Bring my wife and kids with, and we'd have a translator.
Or wait until this summer, when we go back.
There's a cool knife store in Machida, just off the train station. Cheaper
than the larger stores, and they have the long sashimi knives that SWMBO
won't let me buy. There's a Tokyu Hands in Machida too, along with
everything else you might want. Everything...
-MJ
"SCUBA Bookreader" <[email protected]> wrote in message
news:070220071756129503%[email protected]...
> In article <[email protected]>,
> Never Enough Money <[email protected]> wrote:
>
>> There's a 50-50 chance I'll be going to Japna this spring. If I do,
>> where do I go to find the world class chisels and knives? I just
>> thumbed through Lonely Planet (and the index, too) and didn't see any
>> mention....
>>
>>
>> Cheers and TIA.
> In Tokyo the easiest (but not cheapest) is to go to Tokyo Hands in
> Shibuya or Ikibukuro they will speak English but will have a small
> Selection
> http://www.tokyu-hands.co.jp/index.htm (Japanese)
> http://en.wikipedia.org/wiki/Tokyu_Hands
>
> However Joyful Honda has a much bigger selection byt speak little
> English
> The biggest near Tokyo is at Chiba New Town
> http://www.joyfulhonda.com/map/map-chibant01.htm
>
>
> Under toy will find some information from another Tokyo resident
> http://www.joyfulhonda.com/map/map-moriya.htm
> http://www.ablett.jp/workshop/joyful.htm
>
> --
> only replies to the news group please
DonkeyHody wrote:
> On Jan 29, 6:43 pm, "Never Enough Money" <[email protected]>
> wrote:
>> There's a 50-50 chance I'll be going to Japna this spring. If I do,
>> where do I go to find the world class chisels and knives? I just
>> thumbed through Lonely Planet (and the index, too) and didn't see any
>> mention....
>>
>> Cheers and TIA.
>
> I lived in Japan for 2 years. If I were going to Japan for a visit,
> I'd spend my time sightseeing instead of looking for tools. The
> language barrier constantly works against you. You'll be able to make
> them understand that you want a chisel. Beyond that, communication is
> difficult. Good tools aren't cheap over there either. Taxi fare
> alone may eat any savings. Do your shopping with a reliable stateside
> vendor by internet or catalog and enjoy your trip.
>
> DonkeyHody
> "Every man is my superior in that I can learn from him." - Thomas
> Carlyle
>
As for the language barrier, three words went a long way when I was
there 20 years ago. "Domo origato" = Thank you very much. (or "domo"
for "thanks") but formal is better. "Doy tosha mo-sho" is "you're
welcome". I have forgotten what "please" was (Google it maybe). But if
you can master those, the Japanese are a very polite society and simple
courtesy will serve you well.
Mon, Feb 19, 2007, 4:22pm (EST+5) [email protected] (KaiS.) doth claimeth:
As for the language barrier, three words went a long way when I was
there 20 years ago. "Domo origato" = Thank you very much. (or "domo" for
"thanks") but formal is better. "Doy tosha mo-sho" is "you're welcome".
I have forgotten what "please" was (Google it maybe). But if you can
master those, the Japanese are a very polite society and simple courtesy
will serve you well.
Uh, those are phrases, not words. And, you're wrong.
The three most important things to learn first in any foreign
language are:
Please, thank you, and "where's the batchroom", not necessarily in that
order. It's only after you get those three down pat do you concentrate
on how to order beer.
JOAT
When in doubt, go to sleep.
- Mully Small
On Mon, 19 Feb 2007 11:49:31 -0500, [email protected] (J T)
wrote:
>Mon, Feb 19, 2007, 4:22pm (EST+5) [email protected] (KaiS.) doth claimeth:
>As for the language barrier, three words went a long way when I was
>there 20 years ago. "Domo origato" = Thank you very much. (or "domo" for
>"thanks") but formal is better. "Doy tosha mo-sho" is "you're welcome".
>I have forgotten what "please" was (Google it maybe). But if you can
>master those, the Japanese are a very polite society and simple courtesy
>will serve you well.
>
> Uh, those are phrases, not words. And, you're wrong.
>
> The three most important things to learn first in any foreign
>language are:
>Please, thank you, and "where's the batchroom", not necessarily in that
>order. It's only after you get those three down pat do you concentrate
>on how to order beer.
"Airport", "railroad station", or "docks" are also important depending
on how you plan to get home.
"J T" <[email protected]> wrote in message
news:[email protected]...
> Mon, Feb 19, 2007, 4:22pm (EST+5) [email protected] (KaiS.) doth claimeth:
> As for the language barrier, three words went a long way when I was
> there 20 years ago. "Domo origato" = Thank you very much. (or "domo" for
> "thanks") but formal is better. "Doy tosha mo-sho" is "you're welcome".
> I have forgotten what "please" was (Google it maybe). But if you can
> master those, the Japanese are a very polite society and simple courtesy
> will serve you well.
>
> Uh, those are phrases, not words. And, you're wrong.
>
> The three most important things to learn first in any foreign
> language are:
> Please, thank you, and "where's the batchroom", not necessarily in that
> order. It's only after you get those three down pat do you concentrate
> on how to order beer.
>
>
>
> JOAT
> When in doubt, go to sleep.
> - Mully Small
>
Another very useful one is "sumimasan" ("excuse me") - it's much appreciated
there.
Kerry
Never Enough Money <[email protected]> wrote:
> There's a 50-50 chance I'll be going to Japna this spring. If I do,
> where do I go to find the world class chisels and knives? I just
> thumbed through Lonely Planet (and the index, too) and didn't see any
> mention....
Depends on where in Japan you're going. I liked this place in Osaka
http://homepage2.nifty.com/togi/index.htm
I've also heard that there are a lot of woodworking tools available in
the Akasaka area from some Tokyo natives, but I don't get to Tokyo
much.
Brian Huffaker, DSWL
On Mon, 19 Feb 2007 16:22:16 GMT, "KaiS." <[email protected]> wrote:
>DonkeyHody wrote:
>> On Jan 29, 6:43 pm, "Never Enough Money" <[email protected]>
>> wrote:
>>> There's a 50-50 chance I'll be going to Japna this spring. If I do,
>>> where do I go to find the world class chisels and knives? I just
>>> thumbed through Lonely Planet (and the index, too) and didn't see any
>>> mention....
>>>
>>> Cheers and TIA.
>>
>> I lived in Japan for 2 years. If I were going to Japan for a visit,
>> I'd spend my time sightseeing instead of looking for tools. The
>> language barrier constantly works against you. You'll be able to make
>> them understand that you want a chisel. Beyond that, communication is
>> difficult. Good tools aren't cheap over there either. Taxi fare
>> alone may eat any savings. Do your shopping with a reliable stateside
>> vendor by internet or catalog and enjoy your trip.
>>
>> DonkeyHody
>> "Every man is my superior in that I can learn from him." - Thomas
>> Carlyle
>>
>
>
>As for the language barrier, three words went a long way when I was
>there 20 years ago. "Domo origato" = Thank you very much. (or "domo"
>for "thanks") but formal is better. "Doy tosha mo-sho" is "you're
>welcome". I have forgotten what "please" was (Google it maybe). But if
>you can master those, the Japanese are a very polite society and simple
>courtesy will serve you well.
While they'll go a long way, they won't get what kind of chisel you
want across to the chiselmeister.
On Mon, 29 Jan 2007 16:43:59 -0800, Never Enough Money wrote:
> There's a 50-50 chance I'll be going to Japna this spring. If I do,
> where do I go to find the world class chisels and knives? I just
> thumbed through Lonely Planet (and the index, too) and didn't see any
> mention....
>
>
> Cheers and TIA.
There is some culture centers and the like in Japan. If you are near one
you could stop in and ask them about places to purchase. The will probably
know about local tool makers and where to obtain their tools.
Paul T.
http://www.USENETHOST.com 100% Uncensored , 100% Anonymous, 5$/month Only!
"Never Enough Money" <[email protected]> wrote in message
news:[email protected]...
> There's a 50-50 chance I'll be going to Japna this spring. If I
do,
> where do I go to find the world class chisels and knives? I
just
> thumbed through Lonely Planet (and the index, too) and didn't
see any
> mention....
>
>
> Cheers and TIA.
>
Partly it depends on where in Japan you're going.
For the most part, you're not going to find anything resembling a
BORG type store. The closest you might come to that would be
along the Ginza In Tokyo. Mostly what you'll find are "Mom & Pop"
type hardware stores, especially outside of Tokyo.
Your best bet is to get a decent translator's help in locating a
good Tansu Shokunin (Japanese storage chest/cabinet craftsman)
and respectfully request his assistance in locating quality
tools. You could also try a respected local carpenter (Daiku),
but the tool set (but not necessarily the quality of the tools)
will be a bit different. Shoji makers generally use high quality
tools, but their's tend to be more specialized.
The generic word for chisel, the tool as opposed to cheating
someone, is
"nomi" (no - mee). Of course nothing's ever that simple. Specific
types of chisels have their own names, in some cases different
names for the same chisel depending on the craft they are used
in.
There are a few good, and a host of junk, books out there on
Japanese woodworking tools and their terminology. A couple of
good ones available from Amazon.com are:
"Complete Japanese Joinery: A Handbook of Japanese Tool Use and
Woodworking for Joiners and Carpenters", ISBN: 0881791210
and
"Japanese Woodworking Tools: Their Tradition, Spirit, and Use",
ISBN: 0941936465
They are a good way to learn the correct names of the various
edged tools.
Oh! Almost forgot, you may hear references to "blue steel" and
"white steel". Those terms have nothing to do with the color of
steel. They refer to the color of the labels by various
manufacturers, and by some manufacturers on different product
lines.
Len