Rockler has the Jet JWTS-10CW2-JF 10'' Contractor Saw for $399

On Dec 14, 1:21 pm, N Hurst <[email protected]> wrote:
> For anyone looking for a new table saw, this one seems like a good
> deal. You don't pay shipping if you can find one at a local retailer,
> otherwise shipping applies.
>
> http://www.rockler.com/product.cfm?page=3D17903
>
> * Convenient rail mounted on-off switch
> * Extruded aluminum front guide rail allows 30" rip to the right
> and 12" to the left
> * Exclusive design JETFENCE, a quick release precision T-square
> type rip fence
> * Under-cabinet dust collection hood includes a 4" diameter hookup
> * Completely Prewired and includes a unique quick-connect motor-to-
> switch plug for easy set-up
> * Totally enclosed fan cooled motor includes overload protection
> and is UL listed
> * Finish ground, heavy-duty cast iron table with two additional
> 27" x 10" solid cast iron wings with T-style miter gauge slots and
> beveled front edge
> * Deluxe miter gauge includes an extra long bar for larger cross
> cutting capacity
> * Extra heavy-duty trunnion support a cast iron blade arbor
> housing featuring two precision ball bearings
> * Forged one-piece precision ground arbor allows minimal blade run
> out
>
> Stock Number 708300K
> Blade Diameter (in) 10
> Arbor Diameter (in) 5/8
> Max Depth of Cut (in) 3-1/8
> Max Rip Right of Blade (in) 30
> Max Rip Left of Blade 12
> Max Cut Depth at 45=BA (in) 2-1/8
> Table in Front of Saw Blade at Max Cut (in) 11-1/4
> Max Width of Dado (in) 13/16
> Table Height (in) 34-3/8
> Table Size (w/Ext/in) 27D x 40W
> Main Table Size (w/o Ext/in) 27D x 20W
> Overall Dim (H x W x D/in) 41 x 57-1/2 x 42
> Arbor Speed (RPM) 4000
> Motor (TEFC) 1-1/2HP, 1Ph, 115/230V Prewired 115V
> Net Weight (lbs) 300

I have this saw with and upgraded Jet fence (Xacta II IIRC) and it has
been great. They even replaced the motor bracket maybe 3 years after
I bought it so customer service is great too.

On Dec 14, 5:01 pm, mapdude <[email protected]> wrote:
> $35 surcharge for delivery to a residence.
> $35 liftgate fee if not delivered to a dock.
>
> N Hurst wrote:
> > For anyone looking for a new table saw, this one seems like a good
> > deal. You don't pay shipping if you can find one at a local retailer,
> > otherwise shipping applies.
>
> >http://www.rockler.com/product.cfm?page=3D17903
>
> > * Convenient rail mounted on-off switch
> > * Extruded aluminum front guide rail allows 30" rip to the right
> > and 12" to the left
> > * Exclusive design JETFENCE, a quick release precision T-square
> > type rip fence
> > * Under-cabinet dust collection hood includes a 4" diameter hookup
> > * Completely Prewired and includes a unique quick-connect motor-to-
> > switch plug for easy set-up
> > * Totally enclosed fan cooled motor includes overload protection
> > and is UL listed
> > * Finish ground, heavy-duty cast iron table with two additional
> > 27" x 10" solid cast iron wings with T-style miter gauge slots and
> > beveled front edge
> > * Deluxe miter gauge includes an extra long bar for larger cross
> > cutting capacity
> > * Extra heavy-duty trunnion support a cast iron blade arbor
> > housing featuring two precision ball bearings
> > * Forged one-piece precision ground arbor allows minimal blade run
> > out
>
> > Stock Number 708300K
> > Blade Diameter (in) 10
> > Arbor Diameter (in) 5/8
> > Max Depth of Cut (in) 3-1/8
> > Max Rip Right of Blade (in) 30
> > Max Rip Left of Blade 12
> > Max Cut Depth at 45=BA (in) 2-1/8
> > Table in Front of Saw Blade at Max Cut (in) 11-1/4
> > Max Width of Dado (in) 13/16
> > Table Height (in) 34-3/8
> > Table Size (w/Ext/in) 27D x 40W
> > Main Table Size (w/o Ext/in) 27D x 20W
> > Overall Dim (H x W x D/in) 41 x 57-1/2 x 42
> > Arbor Speed (RPM) 4000
> > Motor (TEFC) 1-1/2HP, 1Ph, 115/230V Prewired 115V
> > Net Weight (lbs) 300

No fees at all if bought at a Rockler B&M with one in stock. :-)

Plus, those fees are pretty standard, from my understanding.

$35 surcharge for delivery to a residence.
$35 liftgate fee if not delivered to a dock.



N Hurst wrote:
> For anyone looking for a new table saw, this one seems like a good
> deal. You don't pay shipping if you can find one at a local retailer,
> otherwise shipping applies.
>
> http://www.rockler.com/product.cfm?page=17903
>
> * Convenient rail mounted on-off switch
> * Extruded aluminum front guide rail allows 30" rip to the right
> and 12" to the left
> * Exclusive design JETFENCE, a quick release precision T-square
> type rip fence
> * Under-cabinet dust collection hood includes a 4" diameter hookup
> * Completely Prewired and includes a unique quick-connect motor-to-
> switch plug for easy set-up
> * Totally enclosed fan cooled motor includes overload protection
> and is UL listed
> * Finish ground, heavy-duty cast iron table with two additional
> 27" x 10" solid cast iron wings with T-style miter gauge slots and
> beveled front edge
> * Deluxe miter gauge includes an extra long bar for larger cross
> cutting capacity
> * Extra heavy-duty trunnion support a cast iron blade arbor
> housing featuring two precision ball bearings
> * Forged one-piece precision ground arbor allows minimal blade run
> out
>
> Stock Number 708300K
> Blade Diameter (in) 10
> Arbor Diameter (in) 5/8
> Max Depth of Cut (in) 3-1/8
> Max Rip Right of Blade (in) 30
> Max Rip Left of Blade 12
> Max Cut Depth at 45º (in) 2-1/8
> Table in Front of Saw Blade at Max Cut (in) 11-1/4
> Max Width of Dado (in) 13/16
> Table Height (in) 34-3/8
> Table Size (w/Ext/in) 27D x 40W
> Main Table Size (w/o Ext/in) 27D x 20W
> Overall Dim (H x W x D/in) 41 x 57-1/2 x 42
> Arbor Speed (RPM) 4000
> Motor (TEFC) 1-1/2HP, 1Ph, 115/230V Prewired 115V
> Net Weight (lbs) 300