I bought this Makita LS 1013 compound chop box and love it ton's, has done
everything so far without a hitch till now...just a quick question. I bought
some 1x4x10' wood to finish up the storage area above my garage (it took 35
pieces total) any way when I was loading the wood up some of it felt damp,
not soaking wet but damp, so I didn't give it another thought but when I was
crosscutting it (I do go slow but not too slow or too fast) I notice the
blade wanted to bind up about half way thru the cut (scared me alot) so I
switched back to my Ryobe to finish the job and had no problems , was it
because the wood was damp or the combination of sliding cutting on damp wood
the problem?? I won't be cutting damp wood again on that
saw........................TIA
Tina
If I were to guess, It would be the blade-- If you have a thin kerf
blade in the sliding saw, it would tend to bind more in wet wood than
dry- try switching blades in saws & see if it makes a difference. BTW,
was the wood treated by chance? - it's almost always wet. I think
they continue to soak it in transit so it will spit at you when you use
it LOL. Phil
Tina wrote:
> I bought this Makita LS 1013 compound chop box and love it ton's, has
done
> everything so far without a hitch till now...just a quick question. I
bought
> some 1x4x10' wood to finish up the storage area above my garage (it
took 35
> pieces total) any way when I was loading the wood up some of it felt
damp,
> not soaking wet but damp, so I didn't give it another thought but
when I was
> crosscutting it (I do go slow but not too slow or too fast) I notice
the
> blade wanted to bind up about half way thru the cut (scared me alot)
so I
> switched back to my Ryobe to finish the job and had no problems , was
it
> because the wood was damp or the combination of sliding cutting on
damp wood
> the problem?? I won't be cutting damp wood again on that
> saw........................TIA
>
> Tina
"George" <george@least> wrote in message
news:[email protected]...
>
> "Tina" <[email protected]> wrote in message
> news:8sL%d.3942$%d7.444@lakeread03...
> > I bought this Makita LS 1013 compound chop box and love it ton's, has
done
> > everything so far without a hitch till now...just a quick question. I
> bought
> > some 1x4x10' wood to finish up the storage area above my garage (it took
> 35
> > pieces total) any way when I was loading the wood up some of it felt
> damp,
> > not soaking wet but damp, so I didn't give it another thought but when I
> was
> > crosscutting it (I do go slow but not too slow or too fast) I notice the
> > blade wanted to bind up about half way thru the cut (scared me alot) so
I
> > switched back to my Ryobe to finish the job and had no problems , was it
> > because the wood was damp or the combination of sliding cutting on damp
> wood
> > the problem?? I won't be cutting damp wood again on that
> > saw........................TIA
> >
>
> Damp at the beginning of the cut, that's for sure. Friction of the blade
> heats it up, expands the torn fibers, grips the blade, causing more
friction
> ....
>
> Turners know the importance of keeping a wide kerf and few teeth as they
> bandsaw their uncured blanks.
>
> Thanks George...I'm not a turner but that makes alot of
sense.............thanks again...
Tina
"Tina" <[email protected]> wrote in message
news:8sL%d.3942$%d7.444@lakeread03...
> I bought this Makita LS 1013 compound chop box and love it ton's, has done
> everything so far without a hitch till now...just a quick question. I
bought
> some 1x4x10' wood to finish up the storage area above my garage (it took
35
> pieces total) any way when I was loading the wood up some of it felt
damp,
> not soaking wet but damp, so I didn't give it another thought but when I
was
> crosscutting it (I do go slow but not too slow or too fast) I notice the
> blade wanted to bind up about half way thru the cut (scared me alot) so I
> switched back to my Ryobe to finish the job and had no problems , was it
> because the wood was damp or the combination of sliding cutting on damp
wood
> the problem?? I won't be cutting damp wood again on that
> saw........................TIA
>
Damp at the beginning of the cut, that's for sure. Friction of the blade
heats it up, expands the torn fibers, grips the blade, causing more friction
....
Turners know the importance of keeping a wide kerf and few teeth as they
bandsaw their uncured blanks.