I'm looking at buying a bench grinder at this point more for fixing and
sharpening blades for hand tools. I keep hearing about either slower
spinning wheels or variable speed versions. Right now I can get a good deal
on a delta variable speed or a General international which is only one speed
(slow). They are both 6" models. Any opinion on a good choice? Perhaps
theres a better option.
Thanks,
Michael B.
8" wheels, 1725 rpm's ,white or pink friable wheels. This would be an
ideal grinder.Wish I had it, I have a 6" x 3/4" 3450 rpm grinder
myself. When grinding high speed steel I turn the grinder on, let it
come up to speed, then turn grinder off. Then apply tool to wheel until
wheel stops. This is particularly effective for turning tools.
mike
David wrote:
> I just got an 8" 3/4 HP slow speed (1725 RPM) grinder from Woodcraft
for
> $69 on sale. It came in perfect shape and works well. It doesn't have
a
> light, but my shop's well lit.
>
> David
I bought a Delta Variable Speed GR450 8" grinder at Amazon last week
for $99.99 minus $25 (coupon I had to buy a dial caliper to get over
$125) and minus $30 rebate. Therefore $125 Grinder for $44.99. I don't
know what they're waiting on, though. It still hasn't shipped. I've
never had Amazon take this long on anything.
I'm sure that I'll like it when it arrives. For $45, I'll love it.
On Sun, 26 Dec 2004 22:00:59 GMT, "Lew Hodgett"
<[email protected]> calmly ranted:
>"Larry Jaques" answers:
>
>> Yes, a 1" belt sander is not as hard on the irons as a grinder.
>
>I'm with Larry on this one.
>
>A bench grinder is the quickest way in the world to destroy a cutting tool
>IMHO.
>
>> When I have to remove a chip, I'll sand past it with 120 grit.
>> Then I take out my 600 grit diamond stone and clean it up, finishing
>> the polishing with Scary Sharp(tm) paper in finer grits. (1000,1500)
>
>That's more work than I'm willing to do or have been.
What? 5 minutes and I'm done. The diamond plate cuts quickly, then I
lay a piece of ScaryPaper(tm) on it and on the table in front of it,
give it a few slides, flip it and deburr, swap papers and do it again.
I don't get anal about it but I do like 'em sharp. I bought a diamond
cone for the gouges. Anywho, Scary is much faster than stones for me.
>But then again, my biggest sharpening job right now is a 10" pair of shears
>(scissors) used to cut fiberglass cloth.
Do you do those with a jig or freehand?
-------------------------------------------------
- Boldly going - * Wondrous Website Design
- nowhere. - * http://www.diversify.com
-------------------------------------------------
I took a sharpening course at LV and the instructors mentioned several times
that the slower 1700 rpm was preferred to the 3450 models. Even with the slow
speed it's very easy to over heat certain steels. I bought the VS Delta and am
happy with it. Make sure you get a white wheel for what ever you buy. Cheers, JG
Michael Billings wrote:
> I'm looking at buying a bench grinder at this point more for fixing and
> sharpening blades for hand tools. I keep hearing about either slower
> spinning wheels or variable speed versions. Right now I can get a good deal
> on a delta variable speed or a General international which is only one speed
> (slow). They are both 6" models. Any opinion on a good choice? Perhaps
> theres a better option.
>
> Thanks,
>
> Michael B.
On 26 Dec 2004 19:45:36 -0800, "robdingnagian1"
<[email protected]> calmly ranted:
>
>David wrote:
>> I just got an 8" 3/4 HP slow speed (1725 RPM) grinder from Woodcraft
>for
>> $69 on sale. It came in perfect shape and works well. It doesn't have
>a
>> light, but my shop's well lit.
>>
>> David
>
>I bought a Delta Variable Speed GR450 8" grinder at Amazon last week
>for $99.99 minus $25 (coupon I had to buy a dial caliper to get over
>$125) and minus $30 rebate. Therefore $125 Grinder for $44.99. I don't
>know what they're waiting on, though. It still hasn't shipped. I've
>never had Amazon take this long on anything.
>I'm sure that I'll like it when it arrives. For $45, I'll love it.
Why wait? Cancel it and order the Delta 31-080 or SA-150 1" belt/5"
disc sander instead. They're REALLY handy and $10 cheaper than your
sale item. The SA-180 looks even handier with both a longer belt and
larger disc.
-------------------------------------------------
- Boldly going - * Wondrous Website Design
- nowhere. - * http://www.diversify.com
-------------------------------------------------
On Sun, 26 Dec 2004 06:09:59 GMT, "Michael Billings"
<[email protected]> calmly ranted:
>I'm looking at buying a bench grinder at this point more for fixing and
>sharpening blades for hand tools. I keep hearing about either slower
>spinning wheels or variable speed versions. Right now I can get a good deal
>on a delta variable speed or a General international which is only one speed
>(slow). They are both 6" models. Any opinion on a good choice? Perhaps
>theres a better option.
Yes, a 1" belt sander is not as hard on the irons as a grinder.
When I have to remove a chip, I'll sand past it with 120 grit.
Then I take out my 600 grit diamond stone and clean it up, finishing
the polishing with Scary Sharp(tm) paper in finer grits. (1000,1500)
-------------------------------------------------------------
* * Humorous T-shirts Online
* Norm's Got Strings * Wondrous Website Design
* * http://www.diversify.com
-------------------------------------------------------------
I just got an 8" 3/4 HP slow speed (1725 RPM) grinder from Woodcraft for
$69 on sale. It came in perfect shape and works well. It doesn't have a
light, but my shop's well lit.
David
Michael Billings wrote:
> I'm looking at buying a bench grinder at this point more for fixing and
> sharpening blades for hand tools. I keep hearing about either slower
> spinning wheels or variable speed versions. Right now I can get a good deal
> on a delta variable speed or a General international which is only one speed
> (slow). They are both 6" models. Any opinion on a good choice? Perhaps
> theres a better option.
>
> Thanks,
>
> Michael B.
>
>
"Michael Billings" writes:
> >I'm looking at buying a bench grinder at this point more for fixing and
> >sharpening blades for hand tools.
<snip>
"Larry Jaques" answers:
> Yes, a 1" belt sander is not as hard on the irons as a grinder.
I'm with Larry on this one.
A bench grinder is the quickest way in the world to destroy a cutting tool
IMHO.
> When I have to remove a chip, I'll sand past it with 120 grit.
> Then I take out my 600 grit diamond stone and clean it up, finishing
> the polishing with Scary Sharp(tm) paper in finer grits. (1000,1500)
That's more work than I'm willing to do or have been.
But then again, my biggest sharpening job right now is a 10" pair of shears
(scissors) used to cut fiberglass cloth.
HTH
Lew