Would one of you guys with a Kreg jig be good enough to measure the pilot
portion of your Kreg drill bit and let me know the length of it? I have a
non-Kreg bit, and the pilot is too long to use with my Kreg jig I'm going
to grind it back to the length of a Kreg bit, but need to know the length.
--
-Mike-
[email protected]
On Friday, October 4, 2013 10:26:29 AM UTC-7, Mike Marlow wrote:
> Would one of you guys with a Kreg jig be good enough to measure the pilot
>
> portion of your Kreg drill bit and let me know the length of it? I have a
>
> non-Kreg bit, and the pilot is too long to use with my Kreg jig I'm going
>
> to grind it back to the length of a Kreg bit, but need to know the length.
>
>
>
> --
>
>
>
> -Mike-
>
> [email protected]
Just drop it on the floor. Whatever breaks off ought to be just about right.
Mike Marlow wrote:
> Would one of you guys with a Kreg jig be good enough to measure the
> pilot portion of your Kreg drill bit and let me know the length of
> it? I have a non-Kreg bit, and the pilot is too long to use with my
> Kreg jig I'm going to grind it back to the length of a Kreg bit, but
> need to know the length.
Karl was good enough to measure his and sent me a pic via text messaging -
all set. Thanks Karl!
--
-Mike-
[email protected]
SonomaProducts.com wrote:
> On Friday, October 4, 2013 10:26:29 AM UTC-7, Mike Marlow wrote:
>> Would one of you guys with a Kreg jig be good enough to measure the
>> pilot
>>
>> portion of your Kreg drill bit and let me know the length of it? I
>> have a
>>
>> non-Kreg bit, and the pilot is too long to use with my Kreg jig I'm
>> going
>>
>> to grind it back to the length of a Kreg bit, but need to know the
>> length.
>>
>
> Just drop it on the floor. Whatever breaks off ought to be just about
> right.
Now that's the kind of thinking I like!
--
-Mike-
[email protected]
On 10/4/2013 12:52 PM, Mike Marlow wrote:
> Mike Marlow wrote:
>
>> Would one of you guys with a Kreg jig be good enough to measure the
>> pilot portion of your Kreg drill bit and let me know the length of
>> it? I have a non-Kreg bit, and the pilot is too long to use with my
>> Kreg jig I'm going to grind it back to the length of a Kreg bit, but
>> need to know the length.
>
> Karl was good enough to measure his and sent me a pic via text messaging -
> all set. Thanks Karl!
Anything for a fellow musician, gun nut, woodworker! LOl
--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://plus.google.com/114902129577517371552/posts
http://www.custommade.com/by/ewoodshop/
KarlCaillouet@ (the obvious)