"Rob H." <[email protected]> wrote in message
news:[email protected]...
>I need some help on the second one this week:
>
> http://55tools.blogspot.com/
>
>
> Rob
2450 looks something like an antique chest latch, but larger and cruder. I
does look like it was meant to latch something that opens vertically or that
slides. The large hole makes me think it was meant to go on the base of a
knob.
http://www.colourbox.com/media/2518081
On Jan 11, 11:05=A0pm, "Rob H." <[email protected]> wrote:
> I need some help on the second one this week:
>
> http://55tools.blogspot.com/
>
> Rob
2454. Ship and or boat caulking irons. About half way down this page.
http://www.sydnassloot.com/caulking.htm
Karl
I scrolled the entir epage, and didn't see it. More detail, please.
Christopher A. Young
Learn more about Jesus
www.lds.org
.
"Bill" <[email protected]> wrote in message
news:[email protected]...
> "Rob H."<[email protected]> wrote in message
> news:[email protected]...
>> I need some help on the second one this week:
>>
>> http://55tools.blogspot.com/
>>
>>
>> Rob
Is it cheating to go searching?
If not, I found a picture and brief description of #2452 here:
http://www.caldwellandcompany.net/NewArrivals.html
Herman will be disappointed.
Lilly wanted the upstairs painted.
Christopher A. Young
Learn more about Jesus
www.lds.org
.
"Rob H." <[email protected]> wrote in message
news:[email protected]...
>2451 i have seen similar devices as sink or livestock watering
>(Viehtränke)
Correct, it's a horse trough
With no big surprise, I get zero of six.
No worries, it's all good.
Christopher A. Young
Learn more about Jesus
www.lds.org
.
"Rob H." <[email protected]> wrote in message
news:[email protected]...
Four of the six were correctly identified this week, the answers can be seen
at this address:
http://55tools.blogspot.com/2012/01/set-423.html#answers
Rob
On Jan 12, 4:53=A0am, "[email protected]" <[email protected]> wrote:
> On Jan 11, 11:05=A0pm, "Rob H." <[email protected]> wrote:
>
> > I need some help on the second one this week:
>
> >http://55tools.blogspot.com/
>
> > Rob
>
> 2454. Ship and or boat caulking irons. About half way down this page.http=
://www.sydnassloot.com/caulking.htm
> Karl
Beat me to it.
On 13 Jan., 16:54, willshak <[email protected]> wrote:
> Anyone not on broadband would probably watch those pics load until tomorrow.
> 5616 x 3744 ?
Hey Mr. Imnotamused, i already have reduced them to 8 mb each.
mfg Chris
okok, you are right. Next time smaller pics.
On 13 Jan., 00:12, "Rob H." <[email protected]> wrote:
> "Christian St=FCben" <[email protected]> wrote in message
> >2450 part of a door locker, gate closer, case clasp, belt buckle (most
> >probable guess i think).
> Good guesses but I haven't been able to verify any of them.
a belt buckle, open:
http://www.wackel3d.de/offtopic/bk/2012_01_13_6692.JPG
closed:
http://www.wackel3d.de/offtopic/bk/2012_01_13_6694.JPG
Greetings from germany
Chris
On 1/13/2012 7:54 AM, willshak wrote:
> Christian Stüben wrote the following:
>> On 13 Jan., 00:12, "Rob H." <[email protected]> wrote:
>>> "Christian Stüben" <[email protected]> wrote in message
>>>> 2450 part of a door locker, gate closer, case clasp, belt buckle (most
>>>> probable guess i think).
>>> Good guesses but I haven't been able to verify any of them.
>>
>> a belt buckle, open:
>> http://www.wackel3d.de/offtopic/bk/2012_01_13_6692.JPG
>>
>> closed:
>> http://www.wackel3d.de/offtopic/bk/2012_01_13_6694.JPG
>>
>> Greetings from germany
>> Chris
>
>
> Anyone not on broadband would probably watch those pics load until
> tomorrow.
> 5616 x 3744 ?
>
who is not on broadband?
--
Steve Barker
remove the "not" from my address to email
3rd pic down. It's part of the set of shotgun reloading tools.
Stormin Mormon wrote the following:
> I scrolled the entir epage, and didn't see it. More detail, please.
>
> Christopher A. Young
> Learn more about Jesus
> www.lds.org
> .
>
> "Bill" <[email protected]> wrote in message
> news:[email protected]...
>
>> "Rob H."<[email protected]> wrote in message
>> news:[email protected]...
>>> I need some help on the second one this week:
>>>
>>> http://55tools.blogspot.com/
>>>
>>>
>>> Rob
>
> Is it cheating to go searching?
> If not, I found a picture and brief description of #2452 here:
> http://www.caldwellandcompany.net/NewArrivals.html
>
>
>
--
Bill
In Hamptonburgh, NY
In the original Orange County. Est. 1683
To email, remove the double zeros after @
Christian Stüben wrote the following:
> On 13 Jan., 00:12, "Rob H." <[email protected]> wrote:
>> "Christian Stüben" <[email protected]> wrote in message
>>> 2450 part of a door locker, gate closer, case clasp, belt buckle (most
>>> probable guess i think).
>> Good guesses but I haven't been able to verify any of them.
>
> a belt buckle, open:
> http://www.wackel3d.de/offtopic/bk/2012_01_13_6692.JPG
>
> closed:
> http://www.wackel3d.de/offtopic/bk/2012_01_13_6694.JPG
>
> Greetings from germany
> Chris
Anyone not on broadband would probably watch those pics load until tomorrow.
5616 x 3744 ?
--
Bill
In Hamptonburgh, NY
In the original Orange County. Est. 1683
To email, remove the double zeros after @
Rob H. wrote the following:
>
> "Christian Stüben" <[email protected]> wrote in message
> news:227cdd7d-4644-4f8e-8bd7-a3b6ec39a037@y10g2000vbn.googlegroups.com...
> some silly guesses...
>
>> 2450 part of a door locker, gate closer, case clasp, belt buckle (most
>> probable guess i think).
>
> Good guesses but I haven't been able to verify any of them.
I have a small box shaped like a pirate's treasure chest. It has a
similar latch, but mine is about 1". This part would be on the lid.
The 'hook' slides into a hole in the other part on the chest.
Or, I am completely wrong.
>
>> 2451 i have seen similar devices as sink or livestock watering
>> (Viehtränke)
>
> Correct, it's a horse trough
>
>
>
--
Bill
In Hamptonburgh, NY
In the original Orange County. Est. 1683
To email, remove the double zeros after @
Steve Barker wrote the following:
> On 1/13/2012 7:54 AM, willshak wrote:
>> Christian Stüben wrote the following:
>>> On 13 Jan., 00:12, "Rob H." <[email protected]> wrote:
>>>> "Christian Stüben" <[email protected]> wrote in message
>>>>> 2450 part of a door locker, gate closer, case clasp, belt buckle (most
>>>>> probable guess i think).
>>>> Good guesses but I haven't been able to verify any of them.
>>>
>>> a belt buckle, open:
>>> http://www.wackel3d.de/offtopic/bk/2012_01_13_6692.JPG
>>>
>>> closed:
>>> http://www.wackel3d.de/offtopic/bk/2012_01_13_6694.JPG
>>>
>>> Greetings from germany
>>> Chris
>>
>>
>> Anyone not on broadband would probably watch those pics load until
>> tomorrow.
>> 5616 x 3744 ?
>>
>
> who is not on broadband?
>
I don't know their names, but not everyone has what you have.
--
Bill
In Hamptonburgh, NY
In the original Orange County. Est. 1683
To email, remove the double zeros after @
"Rob H." <[email protected]> wrote in message
news:[email protected]...
>I need some help on the second one this week:
>
> http://55tools.blogspot.com/
>
>
> Rob
2454 Variety of brick bolsters / chisels. Used to cut/shape bricks and
chisel out mortar between bricks.
Thanks, saw it that time. Ring to pull out the shells from the reloader.
Christopher A. Young
Learn more about Jesus
www.lds.org
.
"willshak" <[email protected]> wrote in message
news:[email protected]...
3rd pic down. It's part of the set of shotgun reloading tools.
Stormin Mormon wrote the following:
> I scrolled the entir epage, and didn't see it. More detail, please.
>
> Christopher A. Young
> Learn more about Jesus
> www.lds.org
> .
>
> "Bill" <[email protected]> wrote in message
> news:[email protected]...
>
>> "Rob H."<[email protected]> wrote in message
>> news:[email protected]...
>>> I need some help on the second one this week:
>>>
>>> http://55tools.blogspot.com/
>>>
>>>
>>> Rob
>
> Is it cheating to go searching?
> If not, I found a picture and brief description of #2452 here:
> http://www.caldwellandcompany.net/NewArrivals.html
>
>
>
--
Bill
In Hamptonburgh, NY
In the original Orange County. Est. 1683
To email, remove the double zeros after @
Plenty of people live in areas where high speed is not available.
Christopher A. Young
Learn more about Jesus
www.lds.org
.
"Steve Barker" <[email protected]> wrote in message
news:[email protected]...
>> a belt buckle, open:
>> http://www.wackel3d.de/offtopic/bk/2012_01_13_6692.JPG
>>
>> closed:
>> http://www.wackel3d.de/offtopic/bk/2012_01_13_6694.JPG
>>
>> Greetings from germany
>> Chris
>
>
> Anyone not on broadband would probably watch those pics load until
> tomorrow.
> 5616 x 3744 ?
>
who is not on broadband?
--
Steve Barker
remove the "not" from my address to email
On 1/12/2012 5:47 PM, J Burns wrote:
> On 1/12/12 6:12 PM, Rob H. wrote:
>>
>> "Christian Stüben" <[email protected]> wrote in message
>> news:227cdd7d-4644-4f8e-8bd7-a3b6ec39a037@y10g2000vbn.googlegroups.com...
>> some silly guesses...
>>
>>> 2450 part of a door locker, gate closer, case clasp, belt buckle (most
>>> probable guess i think).
>>
>> Good guesses but I haven't been able to verify any of them.
>>
>>> 2451 i have seen similar devices as sink or livestock watering
>>> (Viehtränke)
>>
>> Correct, it's a horse trough
>>
> I think the walls are sloped to prevent freeze damage.
>
It appears to be 3" deep, would freeze damage be a worry?
On 1/12/2012 5:12 PM, Rob H. wrote:
>
> "Christian Stüben" <[email protected]> wrote in message
> news:227cdd7d-4644-4f8e-8bd7-a3b6ec39a037@y10g2000vbn.googlegroups.com...
> some silly guesses...
>
>> 2450 part of a door locker, gate closer, case clasp, belt buckle (most
>> probable guess i think).
>
> Good guesses but I haven't been able to verify any of them.
>
>> 2451 i have seen similar devices as sink or livestock watering
>> (Viehtränke)
>
> Correct, it's a horse trough
>
>
>
I would not be so sure unless you have actually seen it, seems a horse
trough would be much larger and deeper and taller. This thing really
only looks to be 12" wide and about 6 inches tall if in fact it is 6'
long. Looks more like a tray to catch water from a down spout on the
side of a house. The grass, twigs, and leaves make this thing look
relatively small.
"Steve Barker" <[email protected]> wrote in message
news:[email protected]...
> On 1/13/2012 7:54 AM, willshak wrote:
>> Christian Stüben wrote the following:
>>> On 13 Jan., 00:12, "Rob H." <[email protected]> wrote:
>>>> "Christian Stüben" <[email protected]> wrote in message
>>>>> 2450 part of a door locker, gate closer, case clasp, belt buckle (most
>>>>> probable guess i think).
>>>> Good guesses but I haven't been able to verify any of them.
>>>
>>> a belt buckle, open:
>>> http://www.wackel3d.de/offtopic/bk/2012_01_13_6692.JPG
>>>
>>> closed:
>>> http://www.wackel3d.de/offtopic/bk/2012_01_13_6694.JPG
>>>
>>> Greetings from germany
>>> Chris
>>
>>
>> Anyone not on broadband would probably watch those pics load until
>> tomorrow.
>> 5616 x 3744 ?
>>
>
> who is not on broadband?
>
> --
> Steve Barker
> remove the "not" from my address to email
me
"Rob H." <[email protected]> scribbled:
> I need some help on the second one this week:
>
> http://55tools.blogspot.com/
>
>
> Rob
2250 - almost looks like the hook latch on the back of a moving van
that holds the garage door (for lack of a better term) closed.
On Fri, 13 Jan 2012 09:59:44 -0800, Steve Barker
<[email protected]> wrote:
>On 1/13/2012 7:54 AM, willshak wrote:
>> Christian Stüben wrote the following:
>>> On 13 Jan., 00:12, "Rob H." <[email protected]> wrote:
>>>> "Christian Stüben" <[email protected]> wrote in message
>>>>> 2450 part of a door locker, gate closer, case clasp, belt buckle (most
>>>>> probable guess i think).
>>>> Good guesses but I haven't been able to verify any of them.
>>>
>>> a belt buckle, open:
>>> http://www.wackel3d.de/offtopic/bk/2012_01_13_6692.JPG
>>>
>>> closed:
>>> http://www.wackel3d.de/offtopic/bk/2012_01_13_6694.JPG
>>>
>>> Greetings from germany
>>> Chris
>>
>>
>> Anyone not on broadband would probably watch those pics load until
>> tomorrow.
>> 5616 x 3744 ?
>>
>
>who is not on broadband?
Gunner raises his hand....
One could not be a successful Leftwinger without realizing that,
in contrast to the popular conception supported by newspapers
and mothers of Leftwingers, a goodly number of Leftwingers are
not only narrow-minded and dull, but also just stupid.
Gunner Asch
On 1/13/2012 4:34 PM, Rob H. wrote:
>
>>>> Correct, it's a horse trough
>>>>
>>> I think the walls are sloped to prevent freeze damage.
>>>
>>
>> It appears to be 3" deep, would freeze damage be a worry?
>
>
> The owner of it said that's why they're sloped, I don't know for sure if
> expanding ice is a legitimate worry or not. One detail about it that I
> forgot to mention is that it has a drain hole in the right corner.
Soooooo if it has a drain hole in a corner how would it hold water....?
Still looks like a gutter down spout tray to keep water from washing
out soil. ;~)
http://www.afresnohomeinspector.com/Backwards_downspout_pan.html
On 1/13/2012 3:07 PM, Christian Stüben wrote:
> On 13 Jan., 16:54, willshak<[email protected]> wrote:
>> Anyone not on broadband would probably watch those pics load until tomorrow.
>> 5616 x 3744 ?
>
> Hey Mr. Imnotamused, i already have reduced them to 8 mb each.
>
> mfg Chris
>
>
> okok, you are right. Next time smaller pics.
The number you are looking for is in the 250kb range.
> "Rob H."<[email protected]> wrote in message
> news:[email protected]...
>> I need some help on the second one this week:
>>
>> http://55tools.blogspot.com/
>>
>>
>> Rob
Is it cheating to go searching?
If not, I found a picture and brief description of #2452 here:
http://www.caldwellandcompany.net/NewArrivals.html
"Bill" <[email protected]> wrote in message
news:[email protected]...
> Rob H. wrote:
>> I need some help on the second one this week:
>>
>> http://55tools.blogspot.com/
>>
>>
>> Rob
>
>
> #2449 A honey dipper/ladle?
Nope
> #2450 Clasp for a a gate?
Could be, still not sure about this one.
"Christian Stüben" <[email protected]> wrote in message
news:227cdd7d-4644-4f8e-8bd7-a3b6ec39a037@y10g2000vbn.googlegroups.com...
some silly guesses...
>2450 part of a door locker, gate closer, case clasp, belt buckle (most
>probable guess i think).
Good guesses but I haven't been able to verify any of them.
>2451 i have seen similar devices as sink or livestock watering
>(Viehtränke)
Correct, it's a horse trough
On 1/12/12 6:12 PM, Rob H. wrote:
>
> "Christian Stüben" <[email protected]> wrote in message
> news:227cdd7d-4644-4f8e-8bd7-a3b6ec39a037@y10g2000vbn.googlegroups.com...
> some silly guesses...
>
>> 2450 part of a door locker, gate closer, case clasp, belt buckle (most
>> probable guess i think).
>
> Good guesses but I haven't been able to verify any of them.
>
>> 2451 i have seen similar devices as sink or livestock watering
>> (Viehtränke)
>
> Correct, it's a horse trough
>
I think the walls are sloped to prevent freeze damage.
"J Burns" <[email protected]> wrote in message
news:[email protected]...
> On 1/12/12 6:12 PM, Rob H. wrote:
>>
>> "Christian Stüben" <[email protected]> wrote in message
>> news:227cdd7d-4644-4f8e-8bd7-a3b6ec39a037@y10g2000vbn.googlegroups.com...
>> some silly guesses...
>>
>>> 2450 part of a door locker, gate closer, case clasp, belt buckle (most
>>> probable guess i think).
>>
>> Good guesses but I haven't been able to verify any of them.
>>
>>> 2451 i have seen similar devices as sink or livestock watering
>>> (Viehtränke)
>>
>> Correct, it's a horse trough
>>
> I think the walls are sloped to prevent freeze damage.
>
That's it! Expanding ice could possibly crack the rock.
"Bill" <[email protected]> wrote in message
news:[email protected]...
> Bill wrote:
>> Rob H. wrote:
>>> I need some help on the second one this week:
>>>
>>> http://55tools.blogspot.com/
>>>
>>>
>>> Rob
>>
>>
>> #2449 A honey dipper/ladle?
>
> #2449 Cleaning tool--for a weapon?
>
It isn't for cleaning a weapon. I've posted other models of this tool
before.
On 1/12/2012 7:52 PM, Rob H. wrote:
>
> "Bill" <[email protected]> wrote in message
> news:[email protected]...
>> Bill wrote:
>>> Rob H. wrote:
>>>> I need some help on the second one this week:
>>>>
>>>> http://55tools.blogspot.com/
>>>>
>>>>
>>>> Rob
>>>
>>>
>>> #2449 A honey dipper/ladle?
>>
>> #2449 Cleaning tool--for a weapon?
>>
>
> It isn't for cleaning a weapon. I've posted other models of this tool
> before.
looks like it would be useful for cutting strips, leather or possibly pasta
--
<:3 )~
2450
On 1/13/2012 2:39 AM, anorton wrote:
> or that slides. The large hole makes me think it was meant to go on the
> base of a knob.
and...
On 1/13/2012 3:30 AM, Christian Stüben wrote:
> a belt buckle
I was having trouble with the kinematics of this as a latch, because I
was thinking of the square thing near the 3.25 inch mark as a pivot.
But, if as anorton says, the thing pivots about the large hole, then it
makes sense. The square thing might be decorative or a detent bump.
"Steve Barker" <[email protected]> wrote in message >>
>
> who is not on broadband?
Me, for one. Also no cable TV.
jsw
"Sonny" <[email protected]> wrote in message
news:[email protected]...
> 2453 - River Side Manufacturing Co., in Murfreesboro, NC, is a basket
> making company. It would seem to be a tool for weaving baskets. If
> it has a specific weaving use, I wouldn't know what that is.
>
> Sonny
You're on the right track, they aren't for weaving though they are basket
related.
>>> Correct, it's a horse trough
>>>
>> I think the walls are sloped to prevent freeze damage.
>>
>
> It appears to be 3" deep, would freeze damage be a worry?
The owner of it said that's why they're sloped, I don't know for sure if
expanding ice is a legitimate worry or not. One detail about it that I
forgot to mention is that it has a drain hole in the right corner.
Four of the six were correctly identified this week, the answers can be seen
at this address:
http://55tools.blogspot.com/2012/01/set-423.html#answers
Rob
On 1/13/12 5:43 PM, Leon wrote:
> On 1/13/2012 4:34 PM, Rob H. wrote:
>>
>>>>> Correct, it's a horse trough
>>>>>
>>>> I think the walls are sloped to prevent freeze damage.
>>>>
>>>
>>> It appears to be 3" deep, would freeze damage be a worry?
>>
>>
>> The owner of it said that's why they're sloped, I don't know for sure if
>> expanding ice is a legitimate worry or not. One detail about it that I
>> forgot to mention is that it has a drain hole in the right corner.
>
>
>
> Soooooo if it has a drain hole in a corner how would it hold water....?
> Still looks like a gutter down spout tray to keep water from washing out
> soil. ;~)
>
>
> http://www.afresnohomeinspector.com/Backwards_downspout_pan.html
I wonder if it was designed for making ice? Each trough might make 1500
pounds per night. The season would be longer and the harvesting easier
than with a pond.
In addition to preventing freeze damage, the sloped sides could allow
extraction. The farmer would probably line the concrete with something
smooth and slick. He'd lay a chain across the bottom near each end.
He'd fill the trough with water and when it froze, jack up the block at
each end with the chains, rest it on boards across the trough, and break
it with a chisel.
>> The owner of it said that's why they're sloped, I don't know for sure if
>> expanding ice is a legitimate worry or not. One detail about it that I
>> forgot to mention is that it has a drain hole in the right corner.
>
>
>
> Soooooo if it has a drain hole in a corner how would it hold water....?
I think the idea is that the hole would be normally plugged and then they
would unplug it for draining before adding fresh water.
> Still looks like a gutter down spout tray to keep water from washing out
> soil. ;~)
>
>
> http://www.afresnohomeinspector.com/Backwards_downspout_pan.html
Ok, I'll add your name to the growing list of those who don't believe it's a
horse trough. ;-)
>> Soooooo if it has a drain hole in a corner how would it hold water....?
>> Still looks like a gutter down spout tray to keep water from washing out
>> soil. ;~)
>>
>>
>> http://www.afresnohomeinspector.com/Backwards_downspout_pan.html
>
> I wonder if it was designed for making ice? Each trough might make 1500
> pounds per night. The season would be longer and the harvesting easier
> than with a pond.
>
> In addition to preventing freeze damage, the sloped sides could allow
> extraction. The farmer would probably line the concrete with something
> smooth and slick. He'd lay a chain across the bottom near each end. He'd
> fill the trough with water and when it froze, jack up the block at each
> end with the chains, rest it on boards across the trough, and break it
> with a chisel.
Sounds like that would work, though I guess at this point it would be
difficult to prove this theory, the owner had been told it was a horse
trough when he bought it but I'm always open to other ideas if there is
evidence for them.
On 1/13/12 7:36 PM, Rob H. wrote:
>
>>> Soooooo if it has a drain hole in a corner how would it hold water....?
>>> Still looks like a gutter down spout tray to keep water from washing out
>>> soil. ;~)
>>>
>>>
>>> http://www.afresnohomeinspector.com/Backwards_downspout_pan.html
>>
>> I wonder if it was designed for making ice? Each trough might make
>> 1500 pounds per night. The season would be longer and the harvesting
>> easier than with a pond.
>>
>> In addition to preventing freeze damage, the sloped sides could allow
>> extraction. The farmer would probably line the concrete with something
>> smooth and slick. He'd lay a chain across the bottom near each end.
>> He'd fill the trough with water and when it froze, jack up the block
>> at each end with the chains, rest it on boards across the trough, and
>> break it with a chisel.
>
>
> Sounds like that would work, though I guess at this point it would be
> difficult to prove this theory, the owner had been told it was a horse
> trough when he bought it but I'm always open to other ideas if there is
> evidence for them.
So far I haven't found concrete ice forms, but here are instructions to
make ice in iron pans.
http://journeytoforever.org/farm_library/device/devices10a.html
They're from Ralph Cobleigh's "Handy Farm Devices and How to Make Them,"
copyright 1909. Natural ice was still a valuable product. What a
farmer couldn't use, he could sell.
It seems to me that depending on the temperature, it could take blocks a
long time to freeze solid in pans 12" deep on a wooden table. The
farmer might end up storing blocks that were liquid in the center. If
there's frost in the ground, water 3" deep in a concrete trough should
freeze solid much more reliably overnight. If it's not frozen solid
when the farmer hoists and breaks it, he can drop it and let it finish
freezing.
Hydraulic cement was first made in America in 1818. Use expanded after
the Civil War.
2449 honey server, for people who love BIG cups of coffee
2450, you posted something like this, years ago. The hole slips over an
index or other finger, and the hook is used to move threads on a loom.
2451 Herman Munster's paint roller tray. d'uh!!
2452, an early holder for "tacky finger" or other secretarial product.
2453 used in doing plaster bandage, such as a doctor would use.
2454. These are used by stone cutters. How much would you pay for this set?
149.99? No! Not that much. How about $119.99? No, not that much! And we'll
even throw in the tomato slicer, and the onion dicer, for no extra charge.
And now, how much would you pay for this?
Christopher A. Young
Learn more about Jesus
www.lds.org
.
"Rob H." <[email protected]> wrote in message
news:[email protected]...
I need some help on the second one this week:
http://55tools.blogspot.com/
Rob
On 2012-01-12, Rob H. <[email protected]> wrote:
> I need some help on the second one this week:
>
> http://55tools.blogspot.com/
I think that I need help on the rest. :-)
Posting from rec.crafts.metalworking as always.
2449) Does it have bearings so the grooved object will
rotate freely on the handle?
If so, it might be for guiding running ropes onto the proper
pulley.
2450) A release probably for two ropes (lines) or perhaps chains
in lifting or load binding. The upper chain is through the eye,
and the hook on the lower fits through an eye on a lower line,
or a link in the chain. The projection to the right is to
balance it so if the line goes slack for a moment, it won't
release.
2451) Perhaps the cap to a burial enclosure (to hold the coffin
and protect from underground critters), though it is a bit
small for holding a full sized coffin.
2452) Perhaps one of the rings holding a military rifle of some age
together?
2453) Perhaps for scooping grain -- and for opening a container using
the notch shown in the second photo?
2454) Chisels for stonecarving?
Now to post this (somewhat late -- I was completing a project)
and then see what others have suggested.
Enjoy,
DoN.
--
Remove oil spill source from e-mail
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
On 2012-01-15, Gunner Asch <[email protected]> wrote:
> On Fri, 13 Jan 2012 09:59:44 -0800, Steve Barker
><[email protected]> wrote:
>
>>On 1/13/2012 7:54 AM, willshak wrote:
>>> Christian Stüben wrote the following:
>>>> On 13 Jan., 00:12, "Rob H." <[email protected]> wrote:
>>>>> "Christian Stüben" <[email protected]> wrote in message
>>>>>> 2450 part of a door locker, gate closer, case clasp, belt buckle (most
>>>>>> probable guess i think).
>>>>> Good guesses but I haven't been able to verify any of them.
>>>>
>>>> a belt buckle, open:
>>>> http://www.wackel3d.de/offtopic/bk/2012_01_13_6692.JPG
>>>>
>>>> closed:
>>>> http://www.wackel3d.de/offtopic/bk/2012_01_13_6694.JPG
>>>>
>>>> Greetings from germany
>>>> Chris
>>>
>>>
>>> Anyone not on broadband would probably watch those pics load until
>>> tomorrow.
>>> 5616 x 3744 ?
>>>
>>
>>who is not on broadband?
>
> Gunner raises his hand....
And it appears that your end was imposing bandwidth limitations
on it -- because it took me a lot longer than I expected with a T1 feed
to download each.
Aside from that -- you're releasing lots of information about
your camera by posting an un-edited photo. Here is some of what is in
the exif data on one of those photos:
======================================================================
File Name : 2012_01_13_6694.JPG
Directory : .
File Size : 8 MB
File Modification Date/Time : 2012:01:13 03:19:21
File Type : JPEG
MIME Type : image/jpeg
Make : Canon
Camera Model Name : Canon EOS 5D Mark II
[ ... ]
Software : Digital Photo Professional
Modify Date : 2012:01:13 09:12:00
Artist : Photographer:Christian Stueben
Y Cb Cr Positioning : Centered
Copyright : Copyright:Christian Stueben
Exposure Time : 1/25
F Number : 6.3
ISO : 6400
[ ... ]
Shutter Speed Value : 1/25
Aperture Value : 6.4
Flash : Off
Focal Length : 100.0mm
Macro Mode : Normal
[ ... ]
Canon Firmware Version : Firmware Version 2.1.1
[ ... ]
Owner Name : Christian Stueben
Camera Body No. : 2031303238
Canon Model ID : Unknown (0x80000218)
Serial Number Format : Format 2
[ ... ]
Lens Type : EF100mm f/2.8L Macro IS USM
Internal Serial Number : N666965
[ ... ]
Primary Platform : Microsoft Corporation
======================================================================
These, selected out of 206 total lines.
One of the lines mentioned Microsoft in there, so perhaps you
did edit it, but not using a program which would remove the original
exif data. It looks as though it was modified about six hours after it
was taken, which implies some out-of-camera processing.
In particular, the mention of the camera and lens serial numbers
might make it easier for someone to claim that you have stolen their
camera -- or to find it if it happened that you had stolen the camera
from someone else -- which I don't expect.
So -- the use of a program which can be told to sanitize the
exif data might be a good idea. Whether your program can be told to do
that, or whether you need another program for that, I don't know. I
actually have to take special steps to keep the exif data in the
processed image.
Enjoy,
DoN.
--
Remove oil spill source from e-mail
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---