"Lee Michaels" <leemichaels*nadaspam* at comcast dot net> writes:
>I give up. Do a search for horse drawn hay mower or something similar.
>Every time I come up with something, Google goes back to the original search
>and won't let me send what I want. I guess the folks who have horse drawn
>equipment don't buy enough Google ads. Often I will try to do a search on a
>specific spelling of a word. This is often an URL based spelling. Google
>will substitute what it wants instead. And sometimes I am trying to put in
>some quotation marks. And Google will change the search before I even
>finish typing in my search works.
>
>I am not going to fight it any more. Google can be a royal pain in the ass.
>sometimes.
>
Use the right mouse button on the image and select "copy image location".
Paste it into notepad or vi or emacs or whatever.
trim off the google shit and you get
http://www.history.com/images/media/slideshow/industrial-inventions/antique-horse-drawn-mower.jpg
scott
On Thursday, April 18, 2013 3:10:42 AM UTC-5, Rob H. wrote:
> I have the answers for the first and fifth items this week, I need help o=
n the other four: http://55tools.blogspot.com/ Rob
2849 - Combine finger part, various fingers shown among the images - https:=
//www.google.com/search?q=3Dcombine+finger+part&hl=3Den&qscrl=3D1&rlz=3D1T4=
MXGB_enUS512US513&site=3Dwebhp&tbm=3Disch&tbo=3Du&source=3Duniv&sa=3DX&ei=
=3DUspvUeOLNYnI9gSyn4GABg&ved=3D0CEoQsAQ&biw=3D1280&bih=3D690
Sonny
2845 gluing pegs?
2846, no clue.
2847 maybe an anchor designed to put into cement?
2848 door bells from anorexia bullemia center.
2849 no clue.
2850 no clue.
.
Christopher A. Young
Learn more about Jesus
www.lds.org
.
.
"Rob H." <[email protected]> wrote in message
news:[email protected]...
I have the answers for the first and fifth items this week, I need help on
the
other four:
http://55tools.blogspot.com/
Rob
On Thursday, April 18, 2013 3:10:42 AM UTC-5, Rob H. wrote:
> I have the answers for the first and fifth items this week, I need help on the other four: http://55tools.blogspot.com/ Rob
2849- comes from some (crop) harvesting machine (combine), but I can't recall what machine. Somewhat similar to the spike from the cotton picking machine, posted some months ago.
Sonny
"Sonny" <[email protected]> wrote in message
news:[email protected]...
> On Thursday, April 18, 2013 3:10:42 AM UTC-5, Rob H. wrote:
>> I have the answers for the first and fifth items this week, I need help
>> on the other four: http://55tools.blogspot.com/ Rob
>
> 2849 - Combine finger part, various fingers shown among the images -
> https://www.google.com/search?q=combine+finger+part&hl=en&qscrl=1&rlz=1T4MXGB_enUS512US513&site=webhp&tbm=isch&tbo=u&source=univ&sa=X&ei=UspvUeOLNYnI9gSyn4GABg&ved=0CEoQsAQ&biw=1280&bih=690
>
Actually I think it is a "sickle bar" part. At least that is what we called
it back on the farm. It was used to cut down hay. From the shape of it, I
would think it was from a horse drawn sickle.
Look up horse drawn sickle bar or hay mower.. You can see this shape among
them.
The reason I say it is from a horse drawn sickle is that those old parts had
those extra curves in them. And they were thicker than the more modern
ones. As machinery became more modern, they had straighter lines and were
flatter. I should know. I was raised on a farm that had both horse drawn
equipment and the more modern machine mounted stuff. And we often pulled
the old horse drawn equipment behind our tractor.
And the reason I remember this so well is that they break off now and then.
It was my job to replace them.
Commenting again on 4829. This is a sickle bar tooth. This is a picture of
some of them, mostly modern ones.
<http://www.google.com/search?q=sickle+bar+teeth&sa=X&rls=com.microsoft:en-us:IE-SearchBox&tbm=isch&tbo=u&source=univ&ei=YkxwUcnQEeKdiQKvqoGYAw&ved=0CDMQsAQ&biw=1024&bih=667>
Note that the blade goes back and forth. The tooth sticks out and provides
a blunt surface to force the blade against the hay. This cuts the hay.
This looks to be an old one. I have seen these go for $40. It is probably
an old junk one. But folks go crazy for any of that old country item. This
is what I think this cam off of.
<http://www.google.com/search?q=sickle+bar+teeth&sa=X&rls=com.microsoft:en-us:IE-SearchBox&tbm=isch&tbo=u&source=univ&ei=YkxwUcnQEeKdiQKvqoGYAw&ved=0CDMQsAQ&biw=1024&bih=667#rls=com.microsoft:en-us%3AIE-SearchBox&tbm=isch&sa=1&q=horse+drwn+hay+mower&oq=horse+drwn+hay+mower&gs_l=img.3...17159.26215.0.26819.20.19.0.1.1.0.74.1019.19.19.0...0.0...1c.1.9.img.Gx18T-IIgzE&bav=on.2,or.r_qf.&bvm=bv.45373924,d.cGE&fp=a1a3f41db2835477&biw=1280&bih=853>
It was a yearly ritual to replace broken parts and sharpen everything before
hay season. I use to help my grandfather sharpen the blades on an old
treadle grindstone. As I got older, it was me doing the sharpening, etc.
I will try this again. Google keeps changing my search around and
substituting what it wants.
<http://www.google.com/search?q=sickle+bar+teeth&sa=X&rls=com.microsoft:en-us:IE-SearchBox&tbm=isch&tbo=u&source=univ&ei=YkxwUcnQEeKdiQKvqoGYAw&ved=0CDMQsAQ&biw=1024&bih=667#rls=com.microsoft:en-us%3AIE-SearchBox&tbm=isch&sa=1&q=horse+sickle+bar&oq=horse+sickle+bar&gs_l=img.3...23119.29695.2.30063.10.9.0.1.1.0.73.534.9.9.0...0.0...1c.1.9.img.707yA9bZHB0&bav=on.2,or.r_qf.&bvm=bv.45373924,d.cGE&fp=1f961e0afd7d4651&biw=1280&bih=853>
Hopefully this will go through.
I give up. Do a search for horse drawn hay mower or something similar.
Every time I come up with something, Google goes back to the original search
and won't let me send what I want. I guess the folks who have horse drawn
equipment don't buy enough Google ads. Often I will try to do a search on a
specific spelling of a word. This is often an URL based spelling. Google
will substitute what it wants instead. And sometimes I am trying to put in
some quotation marks. And Google will change the search before I even
finish typing in my search works.
I am not going to fight it any more. Google can be a royal pain in the ass.
sometimes.
"DoN. Nichols" <[email protected]> writes:
> On 2013-04-18, Rob H <[email protected]> wrote:
>> I have the answers for the first and fifth items this week, I need help on the
>> other four:
>>
>> http://55tools.blogspot.com/
>
> Posting from rec.crafts.metalworking as always.
>
> O.K. The first could benefit from having something for scale,
> like perhaps a dime adjacent to the items.
They could indeed. I'm not sure if they are hollow (one of them looks
to be open ended). If so, and the right size, they could be capillary
pipe ends:
http://www.apcoplumbingheatingsupplies.co.uk/plumbing-fittings/copper-pipe-fittings/end-feed/endfeed-cap-15mm
Common tumblers are .115 diameter. Arrow, Corbin, Russwin, Kwikset, Schlage,
etc. Some other sizes for specialty like interchangable core, padlocks,
mogul, etc.
.
Christopher A. Young
Learn more about Jesus
www.lds.org
.
.
"DoN. Nichols" <[email protected]> wrote in message
news:[email protected]...
>>
>>2845, does Johny Carson and Jack Webb
>>have a video about the copper cartridge
>>crushers?
>> http://www.youtube.com/watch?v=cjquGpmgwOo
>
>
O.K. Way too large for my second suggestion (the pin tumblers).
Mean diameter would have to be closer to 0.100" for that to work. Good
thing that I made that the second guess -- based on other criteria. :-)
Thanks,
DoN.
--
Remove oil spill source from e-mail
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. |
http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
Robert wrote:
> "Rob H." <[email protected]> wrote in message
> news:[email protected]...
>> I have the answers for the first and fifth items this week, I need
>> help on the
>> other four:
>>
>> http://55tools.blogspot.com/
>>
>>
>> Rob
>>
> 2845 Bearing's
>
> 2846 Cutting board that spans over a sink or container
>
> 2850 Scope ring
>
>
> Robert
2845 looks more like blasting caps to me ... and 2849 is a replaceable
tooth off a hay mowing cutter bar .
--
Snag
Learning keeps
you young !
"Rob H." <[email protected]> wrote in message
news:[email protected]...
>I have the answers for the first and fifth items this week, I need help on
>the
> other four:
>
> http://55tools.blogspot.com/
>
>
> Rob
>
2845 Bearing's
2846 Cutting board that spans over a sink or container
2850 Scope ring
Robert
Rob H. wrote:
> I have the answers for the first and fifth items this week, I need help on the
> other four:
>
> http://55tools.blogspot.com/
>
>
> Rob
>
2845 - FMJ Wadcutter bullets.
2846 -
2847 -
2848 -
2849 - Rock guard for a sickle bar. That looks like one from an Allis
Chalmers unit.
2850 - Rifle scope base and ring.
--
Steve W.
Rob H. wrote:
> I have the answers for the first and fifth items this week, I need help on the
> other four:
>
> http://55tools.blogspot.com/
>
>
> Rob
This is the most guesses I've ever had! Maybe I got one right? : )
#2845 --bullet blanks?
#2846--jig for net-making?
#2847--to fixture to pass a rope through (ste in concrete)?
#2849--an arrowhead (for archery/hunting)
#2850---a scope mount for a rifle
Bill
"Lee Michaels" <leemichaels*nadaspam* at comcast
dot net> wrote in message
news:[email protected]...
>I give up. Do a search for horse drawn hay mower
>or something similar. Every time I come up with
>something, Google goes back to the original
>search and won't let me send what I want. I
>guess the folks who have horse drawn equipment
>don't buy enough Google ads. Often I will try to
>do a search on a specific spelling of a word.
>This is often an URL based spelling. Google will
>substitute what it wants instead. And sometimes
>I am trying to put in some quotation marks. And
>Google will change the search before I even
>finish typing in my search works.
>
> I am not going to fight it any more. Google can
> be a royal pain in the ass. sometimes.
The first link you posted showed 22 pages of
sickle bar mowers.
The second link showed 23 pages of horse drawn
mowers.
So the links worked here anyway...
Thanks, brings back memories! ;>)}
On 4/18/13 4:10 AM, Rob H. wrote:
> I have the answers for the first and fifth items this week, I need help on the
> other four:
>
> http://55tools.blogspot.com/
>
>
> Rob
>
Rats, I posted in last week's thread!
2846: The arms look spindly. I wonder if they're metal. Near the arms,
there's a wide groove across the board on the side that would be up. I
wonder if it's for slicing through something instead of cutting against
the board. The last raised portion could serve as a visual gage to
slice something into 1" pieces and drop them into a container about 24"
in diameter. I've never seen a barrel of pickled eel.
2848: Are the push buttons electrical? There are mirror sundials.
Perhaps XI is for the hour around 11 AM and the XII is for the hour
around noon.
> O.K. The first could benefit from having something for scale,
>like perhaps a dime adjacent to the items.
I had sent the owner of them an email asking for the size but never heard back,
maybe he is on the road.
>2845) I've got two thoughts here. The above-mentioned coin might
> help me to choose between the two.
>
> a) Crushable copper slugs designed for measuring pressure
> in the chamber of a firearm to test how safe a load may
> be. It is read in "CUP" (Copper Units of Pressure), and
> is determined by how much the length decreases during a
> single firing.
Good answer! That's exactly what they are.
Thanks to everyone who identified the scope mount, we have a probable answer for
the mirrors, and I'm still not sure about the other two mystery items:
http://55tools.blogspot.com/2013/04/set-489.html#answers
Rob
In article <[email protected]>, j Burns says...
>
>On 4/18/13 4:10 AM, Rob H. wrote:
>> I have the answers for the first and fifth items this week, I need help on
the
>> other four:
>>
>> http://55tools.blogspot.com/
>>
>>
>> Rob
>>
>Rats, I posted in last week's thread!
>
>2846: The arms look spindly. I wonder if they're metal. Near the arms,
>there's a wide groove across the board on the side that would be up. I
>wonder if it's for slicing through something instead of cutting against
>the board. The last raised portion could serve as a visual gage to
>slice something into 1" pieces and drop them into a container about 24"
>in diameter. I've never seen a barrel of pickled eel.
The arms look like metal to me, since several people suggested it was a cutting
board I sent an email to the owner asking if there are any knife marks on it,
I'll post his reply when I get it.
>2848: Are the push buttons electrical? There are mirror sundials.
>Perhaps XI is for the hour around 11 AM and the XII is for the hour
>around noon.
The owner described the button as a simple buzzer so I would say that it's an
electrical PB.
"Rob H." <[email protected]> wrote in message
news:[email protected]...
>
>
> http://55tools.blogspot.com/2013/04/set-489.html#answers
>
> Rob
>
Hmmm. I thought about 2847 being some kind of anchor but rejected this
as the wire ring securing the post to the plate would shear off too easily.
Art
In article <[email protected]>, Artemus says...
>
>
>"Rob H." <[email protected]> wrote in message
>news:[email protected]...
>>
>>
>> http://55tools.blogspot.com/2013/04/set-489.html#answers
>>
>> Rob
>>
>Hmmm. I thought about 2847 being some kind of anchor but rejected this
>as the wire ring securing the post to the plate would shear off too easily.
>Art
That's a good point, I still consider this one to be unsolved though sometimes I
still post the most common guess, hopefully we'll get the definitive answer for
it
in the near future.
In article <[email protected]>, Stormin Mormon says...
>
>2845, does Johny Carson and Jack Webb
>have a video about the copper cartridge
>crushers?
> http://www.youtube.com/watch?v=cjquGpmgwOo
Pretty funny, btw I did hear back from the owner who sent the actual size of the
copper crushers:
Mean length, uncompressed .3998", Mean diameter, uncompressed .2260"
On 4/18/2013 3:10 AM, Rob H. wrote:
> I have the answers for the first and fifth items this week, I need help on the
> other four:
>
> http://55tools.blogspot.com/
>
>
> Rob
>
2849 I can not go along with that being called a tooth. I have been a ag
mechanic for 40 years and anyone in farming in the midwest calls them
guards,knife guards or some are rock guards or stub guards (no top bar
or point on them). If you look at any John Deere parts catalog you will
only find guards, no tooth.
Keep up the good work, I look forward to your pictures every week.
Ralph
In article <[email protected]>, Ralph says...
>
>On 4/18/2013 3:10 AM, Rob H. wrote:
>>I have the answers for the first and fifth items this week, I need help on the
>> other four:
>>
>> http://55tools.blogspot.com/
>>
>>
>> Rob
>>
>2849 I can not go along with that being called a tooth. I have been a ag
>mechanic for 40 years and anyone in farming in the midwest calls them
>guards,knife guards or some are rock guards or stub guards (no top bar
>or point on them). If you look at any John Deere parts catalog you will
>only find guards, no tooth.
>Keep up the good work, I look forward to your pictures every week.
>Ralph
I guess you can tell that I'm not a farmer, I went ahead and changed my answer
this morning to guard, it does sound like a more official name. Though there are
plenty of hits on Google for both sickle bar mower teeth and sickle bar mower
finger, I agree that guard is a better term for it.
Rob
2845, does Johny Carson and Jack Webb
have a video about the copper cartridge
crushers?
http://www.youtube.com/watch?v=cjquGpmgwOo
.
Christopher A. Young
Learn more about Jesus
www.lds.org
.
.
"Rob H." <[email protected]> wrote in message
news:[email protected]...
http://55tools.blogspot.com/2013/04/set-489.html#answers
Rob
On 2013-04-18, Rob H <[email protected]> wrote:
> I have the answers for the first and fifth items this week, I need help on the
> other four:
>
> http://55tools.blogspot.com/
Posting from rec.crafts.metalworking as always.
O.K. The first could benefit from having something for scale,
like perhaps a dime adjacent to the items.
2845) I've got two thoughts here. The above-mentioned coin might
help me to choose between the two.
a) Crushable copper slugs designed for measuring pressure
in the chamber of a firearm to test how safe a load may
be. It is read in "CUP" (Copper Units of Pressure), and
is determined by how much the length decreases during a
single firing.
b) "Pusher" tumblers for a pin-tumbler lock. Such a lock
has at least two tumblers -- the cylindrical "pusher"
and the round-nosed one (operating tumbler) which
engages the key. There will also be a spring to hold
them down, and there may be "master disks" to allow two
different keys to operate the same lock. The pushers
may also be reduced in diameter in the middle (like a
spool) to make it more difficult to pick. However -- I
doubt that the pusher tumblers would be packaged in such
quantity -- and they are offered in more than one length
to accommodate the variation in length of the operating
tumbler -- and possibly one or more master disk. Also,
they are usually made of bronze, and not copper plated,
so I think that choice (a) above is the correct one
here.
2846) Purely a guess here. It looks as though it hooks onto a
ridge or rod at the right-hand end, and it might be a cutting
board for meat or cheese, with the hooks allowing it to tilt for
convenience.
2847) This looks a though it is intended to have the plate buried in
concrete, to serve as a weight or an anchor for a long cable to
somewhere. But I wonder how strong the center pin would be with
the fairly simple clip at the bottom. (Unless there is
clearance for the concrete to fill the wall between the center
rod and the sleeve.
2848) Well ... the "2014" is not the year -- yet. :-)
If they are expected to be used in pairs, and if set parallel,
it would be possible to bounce a beam of light between the two
in a zigzag pattern, and with a photosensor, to detect anything
passing between the two. The button could be to announce your
intention to pass between the two -- perhaps to avoid an alarm
being sounded.
2849) Perhaps the point on a boar spear? The cross-piece is intended
to keep the boar from continuing to push his way up the spear
to get to the person wielding the spear (as they have been known
to do)
2850) This one also could benefit from size information.
Looking at the texture of the cloth, I would guess that the ring
has an ID of about 1" -- which would make it likely to serve as
a mount for a rifle or pistol 'scope (telescopic sight). For a
rifle, they are typically used in pairs.
Now time to send this and then see what others have suggested.
Enjoy,
DoN.
--
Remove oil spill source from e-mail
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
On 2013-04-18, Lee Michaels <leemichaels*nadaspam*> wrote:
> I give up. Do a search for horse drawn hay mower or something similar.
> Every time I come up with something, Google goes back to the original search
> and won't let me send what I want. I guess the folks who have horse drawn
> equipment don't buy enough Google ads. Often I will try to do a search on a
> specific spelling of a word. This is often an URL based spelling. Google
> will substitute what it wants instead. And sometimes I am trying to put in
> some quotation marks. And Google will change the search before I even
> finish typing in my search works.
>
> I am not going to fight it any more. Google can be a royal pain in the ass.
> sometimes.
Might I suggest that you first try another search engine. My
current preference is for one called DuckDuckGo <www.duckduckgo.com>
which does not track you, and does not offer ads.
I noticed that the URLs in your previous postings were *very*
long. I had the window widened to about 350 characters (in a
double-monitor screen), and it still folded to one and a half lines. :-)
Sometimes, you can work around this by trimming off the very
long first part of the Google url, and leaving just the actual URL of
the site.
Good luck,
DoN.
--
Remove oil spill source from e-mail
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
On 2013-04-19, Dr Nick <[email protected]> wrote:
> "DoN. Nichols" <[email protected]> writes:
>
>> On 2013-04-18, Rob H <[email protected]> wrote:
>>> I have the answers for the first and fifth items this week, I need help on the
>>> other four:
>>>
>>> http://55tools.blogspot.com/
>>
>> Posting from rec.crafts.metalworking as always.
>>
>> O.K. The first could benefit from having something for scale,
>> like perhaps a dime adjacent to the items.
>
> They could indeed. I'm not sure if they are hollow (one of them looks
> to be open ended). If so, and the right size, they could be capillary
> pipe ends:
I downloaded the image, and played with the gamma and I believe
that dark face is just a case of the angle of illumination -- and
perhaps even reflection of a dark area adjacent to the photo area.
If I had believed that the end was open, that it might be
something like a very small percussion cap.
Enjoy,
DoN.
--
Remove oil spill source from e-mail
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
On 2013-04-19, Artemus <[email protected]> wrote:
>
> "Rob H." <[email protected]> wrote in message
> news:[email protected]...
>>
>>
>> http://55tools.blogspot.com/2013/04/set-489.html#answers
>>
>> Rob
>>
> Hmmm. I thought about 2847 being some kind of anchor but rejected this
> as the wire ring securing the post to the plate would shear off too easily.
> Art
I considered that in my suggested answer, and said that if there
were recesses in between the post and the barrel around it to allow
concrete to flow in and set, this would make up for that.
Even wrenching down seriously on that large nut at the top could
shear the wire ring without something else helping.
It would probably be strong enough if the load were intended to
be a guy wire, pulling at an angle (say 45 degrees) instead of straight
up. And the spread of the base would make that pretty likely.
A photo of it disassembled would help greatly.
Enjoy,
DoN.
--
Remove oil spill source from e-mail
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
On 2013-04-20, Rob H <[email protected]> wrote:
> In article <[email protected]>, Stormin Mormon says...
>>
>>2845, does Johny Carson and Jack Webb
>>have a video about the copper cartridge
>>crushers?
>> http://www.youtube.com/watch?v=cjquGpmgwOo
>
>
> Pretty funny, btw I did hear back from the owner who sent the actual size of the
> copper crushers:
> Mean length, uncompressed .3998", Mean diameter, uncompressed .2260"
O.K. Way too large for my second suggestion (the pin tumblers).
Mean diameter would have to be closer to 0.100" for that to work. Good
thing that I made that the second guess -- based on other criteria. :-)
Thanks,
DoN.
--
Remove oil spill source from e-mail
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
Lee Michaels wrote:
> I give up. Do a search for horse drawn hay mower or something
> similar. Every time I come up with something, Google goes back to the
> original search and won't let me send what I want. I guess the folks
> who have horse drawn equipment don't buy enough Google ads. Often I
> will try to do a search on a specific spelling of a word. This is
> often an URL based spelling. Google will substitute what it wants
> instead. And sometimes I am trying to put in some quotation marks. And
> Google will change the search before I even finish typing in my
> search works.
> I am not going to fight it any more. Google can be a royal pain in
> the ass. sometimes.
www.startpage.com doesn't track you , uses google as a search engine but
doesn't remember what you've searched for before . It rocks IMO .
--
Snag
Learning keeps
you young !