I've got a two car garage that I've dedicated about half of to be my
wood shop. I have fairly high ceilings and plenty of wall space.
I'm at a loss as we're trying to get the garage organized and I'd like
to keep my lumber in there. I only have about 50 pieces of 2.5"
molding at 8ft or so long and no boards over about 10 ft long, most is
2x4's and scrap.
How can I efficiently store this stuff? I'd hate to put that much
weight on shelf brackets or hang it from the ceiling (namely because I
don't wear a hard hat) Ideas?
[email protected] wrote:
> I'm at a loss as we're trying to get the garage organized and I'd like
> to keep my lumber in there. I only have about 50 pieces of 2.5"
> molding at 8ft or so long and no boards over about 10 ft long, most is
> 2x4's and scrap.
>
> How can I efficiently store this stuff?
I use this system:
http://www.leevalley.com/hardware/page.aspx?c=1&p=32144&cat=3,43648,43650
I use the 14" double brackets. My vertical standards are every other
stud, with the last two standards on adjacent studs.
My garage is attached, so the shared wall uses 2x6 studs. The vertical
standards are attached to these studs with two lag bolts and three large
screws each.
Chris
Could you actually store lumber outside "Under shelter" without problems of
humidity and warping?
"SWDeveloper" <[email protected]> wrote in message
news:[email protected]...
> On 26 Apr 2007 09:32:19 -0700, "[email protected]"
> <[email protected]> wrote:
>
>>I've got a two car garage that I've dedicated about half of to be my
>>wood shop. I have fairly high ceilings and plenty of wall space.
>>
>>I'm at a loss as we're trying to get the garage organized and I'd like
>>to keep my lumber in there. I only have about 50 pieces of 2.5"
>>molding at 8ft or so long and no boards over about 10 ft long, most is
>>2x4's and scrap.
>>
>>How can I efficiently store this stuff? I'd hate to put that much
>>weight on shelf brackets or hang it from the ceiling (namely because I
>>don't wear a hard hat) Ideas?
>
>
> The closer to the floor, the better. Or, you can store it outdoors,
> under cover and up off the ground. My lumber storage include a rack I
> built from ShopNotes plans. It includes 4x8 sheet goods storage. The
> rack uses black pipe, 2x4s, and 3 shelves. All the weight is directly
> transferred to the floor
On Sat, 28 Apr 2007 22:22:38 -0400, "Edwin Pawlowski" <[email protected]>
wrote:
>When it was complete, I had a piece of a
>6" wide board that was 12" long. Poor planning on my part.
I would have returned the extra material to the dealer.
"Edwin Pawlowski" <[email protected]> opin'd thus:
>Storing lumber is wasteful. I buy exactly what I need for each project so
>there are no cut-offs hanging around taking up valuable space. If you are
>careful, like me, and don't make mistakes, you won't waste money to buy any
>extra for that reason either. My method makes it much easier keeping the
>shop organized at all times. When I'm done for the day, I just return all
>my tools, like the tape measure, to its designated space, turn the light
>out, and I sleep well knowing everything is ready for the next day.
Oh my. Wood that I were that organized.
But . . . but . . . but . . . that sounds BORING!
One of the most fun things to do is go buy lumber for a project. I buy
most of it from a retired cow-orker, Myron, who has a tree farm and a
huge shed full of all kinds of wood. I'll go there to buy some cherry,
for example, and come back with the cherry, some white oak, some
maple, some spruce, and a few other odds and ends he had laying around
that looked interesting. What did I buy those pieces for? For a song,
usually, and for whatever project that they appeal to me for.
Once in a while when I don't feel any inspiration, I'll go out to
Myron's and say "whattaya got?" It doesn't take long before I have
another project in mind because of an interesting piece of wood that
Myron had laying over in the corner of the shed . . . .
-Don (sorry to call you boring, Ed, but I couldn't work that way)
--
There is a very fine line between "hobby" and "mental illness."
My overhead garage storage consists of 2x4 frames suspended from the
ceiling via threaded rod. The rod is thru bolted to the bottom of the
frame and to 2x4 crosspieces nailed between the ceiling joists. The rod
permits the top of the frame to be snugged up to the ceiling resulting
in a very stable overhead storage. I use 4 frames for 8 foot boards. I
store nothing less than 5 feet long overhead. All the long scraps go in
a garbage can in the corner. Really short scraps of hardwood go in
plastic buckets. Short scraps of softwood are used to start campfires or
just get tossed in the trash.
J.
[email protected] wrote:
> I've got a two car garage that I've dedicated about half of to be my
> wood shop. I have fairly high ceilings and plenty of wall space.
>
> I'm at a loss as we're trying to get the garage organized and I'd like
> to keep my lumber in there. I only have about 50 pieces of 2.5"
> molding at 8ft or so long and no boards over about 10 ft long, most is
> 2x4's and scrap.
>
> How can I efficiently store this stuff? I'd hate to put that much
> weight on shelf brackets or hang it from the ceiling (namely because I
> don't wear a hard hat) Ideas?
>
Don Fearn <[email protected]> wrote in
news:[email protected]:
> "Edwin Pawlowski" <[email protected]> opin'd thus:
>
>>Storing lumber is wasteful. I buy exactly what I need for each project
>>so there are no cut-offs hanging around taking up valuable space. If
>>you are careful, like me, and don't make mistakes, you won't waste
>>money to buy any extra for that reason either. My method makes it
>>much easier keeping the shop organized at all times. When I'm done
>>for the day, I just return all my tools, like the tape measure, to its
>>designated space, turn the light out, and I sleep well knowing
>>everything is ready for the next day.
>
> Oh my. Wood that I were that organized.
>
>
> But . . . but . . . but . . . that sounds BORING!
>
> One of the most fun things to do is go buy lumber for a project. I buy
> most of it from a retired cow-orker, Myron, who has a tree farm and a
> huge shed full of all kinds of wood. I'll go there to buy some cherry,
> for example, and come back with the cherry, some white oak, some
> maple, some spruce, and a few other odds and ends he had laying around
> that looked interesting. What did I buy those pieces for? For a song,
> usually, and for whatever project that they appeal to me for.
>
> Once in a while when I don't feel any inspiration, I'll go out to
> Myron's and say "whattaya got?" It doesn't take long before I have
> another project in mind because of an interesting piece of wood that
> Myron had laying over in the corner of the shed . . . .
>
> -Don (sorry to call you boring, Ed, but I couldn't work that way)
>
I doubt Ed works that way either...
<[email protected]> wrote in message
>
> How can I efficiently store this stuff? I'd hate to put that much
> weight on shelf brackets or hang it from the ceiling (namely because I
> don't wear a hard hat) Ideas?
>
Storing lumber is wasteful. I buy exactly what I need for each project so
there are no cut-offs hanging around taking up valuable space. If you are
careful, like me, and don't make mistakes, you won't waste money to buy any
extra for that reason either. My method makes it much easier keeping the
shop organized at all times. When I'm done for the day, I just return all
my tools, like the tape measure, to its designated space, turn the light
out, and I sleep well knowing everything is ready for the next day.
"Patriarch" <[email protected]> wrote in message
>>
>> -Don (sorry to call you boring, Ed, but I couldn't work that way)
>>
>
> I doubt Ed works that way either...
Did the part where I said I never made a mistake give it away?
--
Ed
http://pages.cthome.net/edhome/
"Edwin Pawlowski" <[email protected]> opin'd thus:
>
>"Patriarch" <[email protected]> wrote in message
>>>
>>> -Don (sorry to call you boring, Ed, but I couldn't work that way)
>>>
>>
>> I doubt Ed works that way either...
>
>Did the part where I said I never made a mistake give it away?
I think I've been had . . . .
Not for the first time, either.
-Don (need to pay attention better)
--
There is a very fine line between "hobby" and "mental illness."
"Don Fearn" <[email protected]> wrote in message
> I think I've been had . . . .
>
> Not for the first time, either.
Truth is, one time I did have some wood left over. I made a complete dining
table, eight chairs, and a hutch. When it was complete, I had a piece of a
6" wide board that was 12" long. Poor planning on my part.
--
Ed
http://pages.cthome.net/edhome/
"[email protected]" <[email protected]> opin'd thus:
>I've got a two car garage that I've dedicated about half of to be my
>wood shop. I have fairly high ceilings and plenty of wall space.
>
>I'm at a loss as we're trying to get the garage organized and I'd like
>to keep my lumber in there. I only have about 50 pieces of 2.5"
>molding at 8ft or so long and no boards over about 10 ft long, most is
>2x4's and scrap.
>
>How can I efficiently store this stuff? I'd hate to put that much
>weight on shelf brackets or hang it from the ceiling (namely because I
>don't wear a hard hat) Ideas?
I wouldn't store lumber in my garage; the humidity and temperature
variations are too great. Instead, I have a separate "Man Garage" (my
wife's designation) where I have my woodworking tools and lumber
storage. I try to keep it at the same temperature and humidity as the
inside of the house, which is no mean feat here in Minnesota, but with
a ceiling-mounted furnace for the winter and a window air conditioner
for the summer I've kept it pretty close . . . .
I use heavy-duty shelving (that I got at Menard's) bolted to the wall
studs so it won't collapse.
-Don
--
There is a very fine line between "hobby" and "mental illness."
On 26 Apr 2007 09:32:19 -0700, "[email protected]"
<[email protected]> wrote:
>I've got a two car garage that I've dedicated about half of to be my
>wood shop. I have fairly high ceilings and plenty of wall space.
>
>I'm at a loss as we're trying to get the garage organized and I'd like
>to keep my lumber in there. I only have about 50 pieces of 2.5"
>molding at 8ft or so long and no boards over about 10 ft long, most is
>2x4's and scrap.
>
>How can I efficiently store this stuff? I'd hate to put that much
>weight on shelf brackets or hang it from the ceiling (namely because I
>don't wear a hard hat) Ideas?
The closer to the floor, the better. Or, you can store it outdoors,
under cover and up off the ground. My lumber storage include a rack I
built from ShopNotes plans. It includes 4x8 sheet goods storage. The
rack uses black pipe, 2x4s, and 3 shelves. All the weight is directly
transferred to the floor