Someone, who had an old vise, sent me their email add. requesting a photo my
disabled hunk of iron, as they had several old vises and may have the part
that I need. Unfortunatly I can not locate the address, but I do have the
pick. If they happen to read this post, I would very much appreciated it if
they could re-send me the address.
My appoloby for being a Klutz
Joe
"JOE MOHNIKE" <[email protected]> wrote in message
news:[email protected]...
> Does anyone have any idea how to obtain parts for a Wilton woodworking
> vise? I have done several searches and only come up is retailers. The
> half (quick release nut) on my vise is shot and need to replace it.
>
> Any ideas will be appreciated.
>
> Joe
>
JOE MOHNIKE wrote:
> Does anyone have any idea how to obtain parts for a Wilton woodworking vise?
> I have done several searches and only come up is retailers. The half (quick
> release nut) on my vise is shot and need to replace it.
>
> Any ideas will be appreciated.
>
> Joe
>
>
Try:
http://www.wiltontool.com/
--
Jack Novak
Buffalo, NY - USA
[email protected]
JOE MOHNIKE wrote:
> Does anyone have any idea how to obtain parts for a Wilton
> woodworking vise? I have done several searches and only come up is
> retailers. The half (quick release nut) on my vise is shot and need
> to replace it.
>
> Any ideas will be appreciated.
Try
http://www.grainger.com/Grainger/rp_search_by_product.jsp?mfgSearchCriteria=Wilton&search.x=1&baseSearchType=product.
--
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)
In article <[email protected]>,
JOE MOHNIKE <[email protected]> wrote:
>Does anyone have any idea how to obtain parts for a Wilton woodworking vise?
>I have done several searches and only come up is retailers. The half (quick
>release nut) on my vise is shot and need to replace it.
>
>Any ideas will be appreciated.
>
>Joe
>
>
If it is of fairly recent manufature try Grainger Parts 888 361 8649 or
http://www.grainger.com/Grainger/rp_parts_home.jsp?xi=xi
--
When the game is over, the pawn and the king are returned to the same box.
Larry Wasserman - Baltimore Maryland - lwasserm(a)sdf. lonestar.org
JOE MOHNIKE wrote:
> Someone, who had an old vise, sent me their email add. requesting a photo my
> disabled hunk of iron, as they had several old vises and may have the part
> that I need. Unfortunatly I can not locate the address, but I do have the
> pick. If they happen to read this post, I would very much appreciated it if
> they could re-send me the address.
> My appoloby for being a Klutz
>
> Joe
> "JOE MOHNIKE" <[email protected]> wrote in message
> news:[email protected]...
>> Does anyone have any idea how to obtain parts for a Wilton woodworking
>> vise? I have done several searches and only come up is retailers. The
>> half (quick release nut) on my vise is shot and need to replace it.
>>
>> Any ideas will be appreciated.
>>
>> Joe
>>
>
>
Joe;
While researching for someone who has a Jet Table Saw I discovered that
WMH Tool Group, 2420 Vantage DR, Elbin, IL 60123 Ph: 1-800-274-6848
Http://www.wmhtoolgroup.com also handles Wilton.
They say that if you don't find what you want on line to give them a
phone call.
Hopes this helps
Dave N