Had the walnut log http://www.flickr.com/photos/43836144@N04/8141498429/i=
n/photostream milled this morning. 11'3" long, 19.5" wide finished/rough=
cut boards. I had 5 boards cut 6/4 for table tops and the rest cut 4/4. =
All the scab cuts were 4/4, also. Calculating and rough estimate of the sc=
ab lumber came to a touch over 400 bd ft of lumber. Two nails were discove=
red 6" deep, so I bought 2 saw blades, $30 each. All toll: $140 for the m=
ill's services.
In the pic, the 2 forked sections, at the left end of the log, were among t=
he pieces given to my turning friend. One of those forks was a 3 prong for=
k and he's anxious to see what that figured wood looks like. We'll go get =
the root ball another day. The root ball was clean of dirt, so it shouldn'=
t be too difficult getting that.
Sonny
On Thursday, November 8, 2012 7:00:30 PM UTC-6, Mike M wrote:
> What a great deal well worth the two blades. I enjoy working with walnut.=
Mike M
The miller, Lynn, said the tree was about 200 yrs old and the nails were pu=
t in about 70-80 yrs ago. The saw blade had just barely nicked each nail a=
nd Lynn was able to pull the nails fairly easily, leaving some nice blacken=
ed defect areas in the wood. There's some nice figure in some boards, also=
. =20
I've been milling logs with Mr. Fred and, now, his nephew (Lynn) for maybe =
20 yrs, so I think I get some discounted rates. I mentioned to him a new c=
amp will be built and he offered his 5/4 cypress boards for $0.70 bd ft (fo=
r 10K bd ft lots, *no picking through the lots for all perfect boards) and =
that's a good deal, also. *All his lumber is nice lumber, anyway.
Sonny
On Thu, 8 Nov 2012 11:32:50 -0800 (PST), Sonny <[email protected]>
wrote:
>Had the walnut log http://www.flickr.com/photos/43836144@N04/8141498429/in/photostream milled this morning. 11'3" long, 19.5" wide finished/rough cut boards. I had 5 boards cut 6/4 for table tops and the rest cut 4/4. All the scab cuts were 4/4, also. Calculating and rough estimate of the scab lumber came to a touch over 400 bd ft of lumber. Two nails were discovered 6" deep, so I bought 2 saw blades, $30 each. All toll: $140 for the mill's services.
>
>In the pic, the 2 forked sections, at the left end of the log, were among the pieces given to my turning friend. One of those forks was a 3 prong fork and he's anxious to see what that figured wood looks like. We'll go get the root ball another day. The root ball was clean of dirt, so it shouldn't be too difficult getting that.
>
>Sonny
What a great deal well worth the two blades. I enjoy working with
walnut.
Mike M
On 11/8/2012 8:01 PM, Sonny wrote:
> On Thursday, November 8, 2012 2:05:45 PM UTC-6, chaniarts wrote:
>> can you adopt me?
>
> That's a thought. I'm getting slower and slower, these days, and some assistance wouldn't be a bad idea.
Request a birth certificate, proof of insurance, and a dental checkup
first ... <g>
(Good looking log ... I still have a goodly stash of AR walnut from
Linda's Uncle Tete, otherwise I might have to stop by for a cup of
coffee, cher) :)
--
--
www.eWoodShop.com
Last update: 4/15/2010
KarlCaillouet@ (the obvious)
http://gplus.to/eWoodShop
On 11/8/2012 12:32 PM, Sonny wrote:
> Had the walnut log http://www.flickr.com/photos/43836144@N04/8141498429/in/photostream milled this morning. 11'3" long, 19.5" wide finished/rough cut boards. I had 5 boards cut 6/4 for table tops and the rest cut 4/4. All the scab cuts were 4/4, also. Calculating and rough estimate of the scab lumber came to a touch over 400 bd ft of lumber. Two nails were discovered 6" deep, so I bought 2 saw blades, $30 each. All toll: $140 for the mill's services.
>
> In the pic, the 2 forked sections, at the left end of the log, were among the pieces given to my turning friend. One of those forks was a 3 prong fork and he's anxious to see what that figured wood looks like. We'll go get the root ball another day. The root ball was clean of dirt, so it shouldn't be too difficult getting that.
>
> Sonny
>
can you adopt me?