"Leon" <lcb11211@swbelldotnet> wrote in message
news:[email protected]...
> On 5/6/2013 12:13 PM, Spalted Walt wrote:
>>
>> Sit back and enjoy this wonderful example of early American ingenuity to
>> produce
>> wooden boxes.
>>
>> Somehow, I donât think OSHA knows about this place...
>>
>> http://youtube.googleapis.com/v/_mKSKZau9qs
>>
>
>
> That was very cool! I wonder if the dog's tail was shortened in the
> factory too? ;~)
Tell us the truth Leon. Did you get steam engine envy while watching this?
:-)
> Spalted Walt <[email protected]> wrote in
> news:[email protected]:
>
>> http://youtube.googleapis.com/v/_mKSKZau9qs
>
Wow. where to start?
1) The first comment I would make is that is an obvious historical site.
It is fascinating to watch how it was done long ago. And not as a
recreation either. It is an actual, working factory. Which is very cool.
And probably buys them considerable leeway with safety regulations.
2) Having said that I got nervous looking at that thing. I was hiding my
hands, sweating a little and picked up a couple extra heartbeats. That was
SCARY. The opportunities for a major injury/accident/death were
astronomical! I am a safety freak. I could never work in a place like
that.
3) Did you see all those belts?? I just kept think about somebody slipping
and taking a tumble into those belts. They would find you smeared all over
everything!
4) And steam, lot and lots of steam. Apparently this steam isn't contained
all that well. It leaks out everywhere. Looks like lots of burn potential
there.
5) There is an obvious constant need for lubrication. You have to stick
your hand into that big machinery, while it is operating, and squirt oil
into its midst. Presumably to appease the anger of the steam and cast iron
gods. It looks like some kind of early industrial religion. And these gods
probably are not happy unless they get a human (or canine) sacrifice now and
then.
6) And you get to feed the boiler. You take scraps and shovel them into
the fire box. Which must be very hot. Hopefully nobody falls into there.
Think of it as a nano hell.
7) The ultimate hybrid creation they had there was the "brander" wood
burning device. You had a modern branding plate made from magnesium. You
had a rat's nest of wiring, looking like it was recycled from 80 years ago.
And you had a very modern digital control device to regulate the
temperature. All of this hooked up to a bunch of recycled parts to make a
machine that stamps a brand into the wood pieces very efficiently. Steam
punk meets the digital age.
8) That nailing machine used to assemble the boxes had one very interesting
characteristic. You had to stick your fingers into the middle of that thing
every time you attached a board. And you do this hundreds, if not thousands
of times per job. If somebody worked there for many years he could have
done this a million times or so. Just ask yourself, could you do that a
100,000 times without nailing your fingers?
9) One thing I find fascinating is that those old steam factories, like the
big water wheel factories before them, had a central power source. Every
thing ran off of that through pulleys and geared wheels. I understand that
some Amish shops do something similar. It creates a whole different dynamic
of design, engineering and safety concerns.
10) And I am glad I live in the modern world. And that safety features are
common on modern tools. I can't help but wonder how many people were maimed
and killed in such environments. And every thing is so much smaller now.
You can just buy a planer. You don't need and acre of cast iron and steam
to operate it. Although it is fascinating to look at, give me modern tools
any day.
On Mon, 06 May 2013 15:53:53 -0500, Leon <lcb11211@swbelldotnet>
wrote:
>On 5/6/2013 3:25 PM, Swingman wrote:
>> "Lee Michaels" <leemichaels*nadaspam* at comcast dot net> wrote:
>>> "Leon" <lcb11211@swbelldotnet> wrote in message
>>> news:[email protected]...
>>>> On 5/6/2013 12:13 PM, Spalted Walt wrote:
>>>>>
>>>>> Sit back and enjoy this wonderful example of early American ingenuity to >> produce
>>>>> wooden boxes.
>>>>>
>>>>> Somehow, I dont think OSHA knows about this place...
>>>>>
>>>>> http://youtube.googleapis.com/v/_mKSKZau9qs
>>>>>
>>>>
>>>>
>>>> That was very cool! I wonder if the dog's tail was shortened in the > factory too? ;~)
>>>
>>> Tell us the truth Leon. Did you get steam engine envy while watching this? :-)
>>
>> Festool doesn't make one, yet.
>>
>
>
>Yet, being the key word. LOL
I thought you'd be looking for the SteamStop version.
"Lee Michaels" <leemichaels*nadaspam* at comcast dot net> wrote:
> "Leon" <lcb11211@swbelldotnet> wrote in message
> news:[email protected]...
>> On 5/6/2013 12:13 PM, Spalted Walt wrote:
>>>
>>> Sit back and enjoy this wonderful example of early American ingenuity to >> produce
>>> wooden boxes.
>>>
>>> Somehow, I donât think OSHA knows about this place...
>>>
>>> http://youtube.googleapis.com/v/_mKSKZau9qs
>>>
>>
>>
>> That was very cool! I wonder if the dog's tail was shortened in the > factory too? ;~)
>
> Tell us the truth Leon. Did you get steam engine envy while watching this? :-)
Festool doesn't make one, yet.
--
www.ewoodshop.com (Mobile)
On Monday, May 6, 2013 12:13:13 PM UTC-5, Spalted Walt wrote:
> Sit back and enjoy this wonderful example of early American ingenuity to =
produce wooden boxes.=20
Pretty neat. A good place to pull in to, next time on vacation.
> Somehow, I don=92t think OSHA knows about this place... http://youtube.go=
ogleapis.com/v/_mKSKZau9qs
If they ain't got no calendar on the wall, updated regs don't matter.
If the dog don't mind, then OSHA don't mind, either.
Sonny
That factory was not as scary at the cedar shake factory I once
toured. It was from the 1800's. Most of it looked like this factory
except there was an ancient electric motor driving all the shafts. The
one thing that made me cringe was the final operation where the
shingles were cut. There was an totally unguarded band saw where the
operator diagonally cut a 1" by 2' billet. Reaching around the blade
as he pushed it in one side and pulled it out the other.
On Mon, 06 May 2013 17:13:13 +0000, Spalted Walt
<[email protected]> wrote:
>
>Sit back and enjoy this wonderful example of early American ingenuity to produce
>wooden boxes.
>
>Somehow, I dont think OSHA knows about this place...
>
>http://youtube.googleapis.com/v/_mKSKZau9qs
On 5/6/2013 3:25 PM, Swingman wrote:
> "Lee Michaels" <leemichaels*nadaspam* at comcast dot net> wrote:
>> "Leon" <lcb11211@swbelldotnet> wrote in message
>> news:[email protected]...
>>> On 5/6/2013 12:13 PM, Spalted Walt wrote:
>>>>
>>>> Sit back and enjoy this wonderful example of early American ingenuity to >> produce
>>>> wooden boxes.
>>>>
>>>> Somehow, I donât think OSHA knows about this place...
>>>>
>>>> http://youtube.googleapis.com/v/_mKSKZau9qs
>>>>
>>>
>>>
>>> That was very cool! I wonder if the dog's tail was shortened in the > factory too? ;~)
>>
>> Tell us the truth Leon. Did you get steam engine envy while watching this? :-)
>
> Festool doesn't make one, yet.
>
Yet, being the key word. LOL
Spalted Walt <[email protected]> wrote in
news:[email protected]:
> http://youtube.googleapis.com/v/_mKSKZau9qs
Not much wondering why that dog doesn't have a tail...
On Mon, 6 May 2013 16:37:39 -0400, "Lee Michaels"
<leemichaels*nadaspam* at comcast dot net> wrote:
>
>
>> Spalted Walt <[email protected]> wrote in
>> news:[email protected]:
>>
>>> http://youtube.googleapis.com/v/_mKSKZau9qs
>>
>Wow. where to start?
>
>1) The first comment I would make is that is an obvious historical site.
>It is fascinating to watch how it was done long ago. And not as a
>recreation either. It is an actual, working factory. Which is very cool.
>And probably buys them considerable leeway with safety regulations.
There is a window factory in Ontario cottage country that still has
the lineshaft and flat belt drive system, with many tools of the same
vintage - converted from steam to gasoline in the forties, I believe -
and to electric in the 'fifties.
>
>2) Having said that I got nervous looking at that thing. I was hiding my
>hands, sweating a little and picked up a couple extra heartbeats. That was
>SCARY. The opportunities for a major injury/accident/death were
>astronomical! I am a safety freak. I could never work in a place like
>that.
Not much different than an old threshing machine
>
>3) Did you see all those belts?? I just kept think about somebody slipping
>and taking a tumble into those belts. They would find you smeared all over
>everything!
>
>4) And steam, lot and lots of steam. Apparently this steam isn't contained
>all that well. It leaks out everywhere. Looks like lots of burn potential
>there.
>
>5) There is an obvious constant need for lubrication. You have to stick
>your hand into that big machinery, while it is operating, and squirt oil
>into its midst. Presumably to appease the anger of the steam and cast iron
>gods. It looks like some kind of early industrial religion. And these gods
>probably are not happy unless they get a human (or canine) sacrifice now and
>then.
>
>6) And you get to feed the boiler. You take scraps and shovel them into
>the fire box. Which must be very hot. Hopefully nobody falls into there.
>Think of it as a nano hell.
>
>7) The ultimate hybrid creation they had there was the "brander" wood
>burning device. You had a modern branding plate made from magnesium. You
>had a rat's nest of wiring, looking like it was recycled from 80 years ago.
>And you had a very modern digital control device to regulate the
>temperature. All of this hooked up to a bunch of recycled parts to make a
>machine that stamps a brand into the wood pieces very efficiently. Steam
>punk meets the digital age.
Except for the digital temperature control it is exactly the way it
was done almost 100 years ago. - and magnesium plates have been in use
since the late 1930s. Prior to that cast iron branding plates were
common., along with copper and brass alloys
>
>8) That nailing machine used to assemble the boxes had one very interesting
>characteristic. You had to stick your fingers into the middle of that thing
>every time you attached a board. And you do this hundreds, if not thousands
>of times per job. If somebody worked there for many years he could have
>done this a million times or so. Just ask yourself, could you do that a
>100,000 times without nailing your fingers?
>
>9) One thing I find fascinating is that those old steam factories, like the
>big water wheel factories before them, had a central power source. Every
>thing ran off of that through pulleys and geared wheels. I understand that
>some Amish shops do something similar. It creates a whole different dynamic
>of design, engineering and safety concerns.
A machine shop I used to frequent in the 'sixties in Elmira Ontario
was all line-shaft and flat belt driven. - I think the newest
equipment in that shop that was not made in the shop was likely from
the very early thirties, if not the twenties.
>
>10) And I am glad I live in the modern world. And that safety features are
>common on modern tools. I can't help but wonder how many people were maimed
>and killed in such environments. And every thing is so much smaller now.
>You can just buy a planer. You don't need and acre of cast iron and steam
>to operate it. Although it is fascinating to look at, give me modern tools
>any day.
>
>
>
>
On Mon, 06 May 2013 17:29:36 -0400, Bill <[email protected]>
>Yep, while I was watching the video I kept asking myself whether that
>would be someplace I would want to go to work every day. And the answer
>is, I don't think so.
Without the knowledge of today's society and a family to support?
Sure, I would. It sure as hell would beat having to work in a mine
everyday with a zillion tons of rock above your head and conditions
that would drive many mad.
On 5/6/2013 12:13 PM, Spalted Walt wrote:
>
> Sit back and enjoy this wonderful example of early American ingenuity to produce
> wooden boxes.
>
> Somehow, I donât think OSHA knows about this place...
>
> http://youtube.googleapis.com/v/_mKSKZau9qs
>
That was very cool! I wonder if the dog's tail was shortened in the
factory too? ;~)
Lee Michaels wrote:
>
> 10) And I am glad I live in the modern world. And that safety
> features are common on modern tools. I can't help but wonder how many
> people were maimed and killed in such environments. And every thing
> is so much smaller now. You can just buy a planer. You don't need and
> acre of cast iron and steam to operate it. Although it is fascinating
> to look at, give me modern tools any day.
>
>
>
Yep, while I was watching the video I kept asking myself whether that
would be someplace I would want to go to work every day. And the answer
is, I don't think so.
Bill
>
>
On 5/6/2013 1:58 PM, Larry wrote:
> Spalted Walt <[email protected]> wrote in
> news:[email protected]:
>
>> http://youtube.googleapis.com/v/_mKSKZau9qs
>
> Not much wondering why that dog doesn't have a tail...
>
Ha!! I thought the same thing. :-)
--
Bill
In Hamptonburgh, NY
In the original Orange County. Est. 1683
To email, remove the double zeros after @
[email protected] wrote:
> On Mon, 06 May 2013 17:29:36 -0400, Bill <[email protected]>
>> Yep, while I was watching the video I kept asking myself whether that
>> would be someplace I would want to go to work every day. And the answer
>> is, I don't think so.
> Without the knowledge of today's society and a family to support?
> Sure, I would.
Well, that's a different question. I can imagine a company like that
offering some of the best paying jobs in town.
Just like Henry Ford's automotive assembly line (started in 1913) . Men
jumped at the opportunity to earn $5 a day.
Some of their wives observed that it took an awful toll on them (feeling
that perhaps the sacrifice wasn't worth the money).
> It sure as hell would beat having to work in a mine
> everyday with a zillion tons of rock above your head and conditions
> that would drive many mad.
Lee Michaels wrote:
>
>
>> Spalted Walt <[email protected]> wrote in
>> news:[email protected]:
>>
>>> http://youtube.googleapis.com/v/_mKSKZau9qs
>>
> Wow. where to start?
>
> 1) The first comment I would make is that is an obvious historical
> site. It is fascinating to watch how it was done long ago. And not as a
> recreation either. It is an actual, working factory. Which is very
> cool. And probably buys them considerable leeway with safety regulations.
>
> 2) Having said that I got nervous looking at that thing. I was hiding
> my hands, sweating a little and picked up a couple extra heartbeats.
> That was SCARY. The opportunities for a major injury/accident/death
> were astronomical! I am a safety freak. I could never work in a place
> like that.
>
> 3) Did you see all those belts?? I just kept think about somebody
> slipping and taking a tumble into those belts. They would find you
> smeared all over everything!
>
> 4) And steam, lot and lots of steam. Apparently this steam isn't
> contained all that well. It leaks out everywhere. Looks like lots of
> burn potential there.
>
> 5) There is an obvious constant need for lubrication. You have to
> stick your hand into that big machinery, while it is operating, and
> squirt oil into its midst. Presumably to appease the anger of the steam
> and cast iron gods. It looks like some kind of early industrial
> religion. And these gods probably are not happy unless they get a human
> (or canine) sacrifice now and then.
>
> 6) And you get to feed the boiler. You take scraps and shovel them
> into the fire box. Which must be very hot. Hopefully nobody falls into
> there. Think of it as a nano hell.
>
> 7) The ultimate hybrid creation they had there was the "brander" wood
> burning device. You had a modern branding plate made from magnesium.
> You had a rat's nest of wiring, looking like it was recycled from 80
> years ago. And you had a very modern digital control device to regulate
> the temperature. All of this hooked up to a bunch of recycled parts to
> make a machine that stamps a brand into the wood pieces very
> efficiently. Steam punk meets the digital age.
>
> 8) That nailing machine used to assemble the boxes had one very
> interesting characteristic. You had to stick your fingers into the
> middle of that thing every time you attached a board. And you do this
> hundreds, if not thousands of times per job. If somebody worked there
> for many years he could have done this a million times or so. Just ask
> yourself, could you do that a 100,000 times without nailing your fingers?
>
> 9) One thing I find fascinating is that those old steam factories, like
> the big water wheel factories before them, had a central power source.
> Every thing ran off of that through pulleys and geared wheels. I
> understand that some Amish shops do something similar. It creates a
> whole different dynamic of design, engineering and safety concerns.
>
> 10) And I am glad I live in the modern world. And that safety features
> are common on modern tools. I can't help but wonder how many people
> were maimed and killed in such environments. And every thing is so much
> smaller now. You can just buy a planer. You don't need and acre of cast
> iron and steam to operate it. Although it is fascinating to look at,
> give me modern tools any day.
>
>
>
>
>
During my lifetime not so long ago I worked at a flour mill which had
similar belt system off a large motor and shafts on each floor.
The machines were put in service by manually slipping belts on or off
while the drive shaft was turning.
the safety factor was covered by not allowing anyong younger than 16 to
engage belts.
On 06 May 2013 17:58:48 GMT, Larry <[email protected]> wrote:
>> http://youtube.googleapis.com/v/_mKSKZau9qs
>
>Not much wondering why that dog doesn't have a tail...
Damn! That's exactly what I though too when I saw the dog walk by. :)