A friend has a wooden post in her front yard with a light attached.
There are 2 spots the size of golf balls that, I guess, rotted out and
were filled with what looks like wood putty. She would like them
repaired. At first I thought of using Bondo, but then I figured the
"plug" would just fall out like the wood putty did. At this point, I'm
thinking that the way to go is to turn the hole into a mortise and fill
it with another piece of wood, dutchman style.
Does anyone have any better ideas?
Thanks,
-Phil Crow
On 9 May 2005 05:04:30 -0700, the inscrutable
[email protected] spake:
>A friend has a wooden post in her front yard with a light attached.
>There are 2 spots the size of golf balls that, I guess, rotted out and
>were filled with what looks like wood putty. She would like them
>repaired. At first I thought of using Bondo, but then I figured the
>"plug" would just fall out like the wood putty did. At this point, I'm
>thinking that the way to go is to turn the hole into a mortise and fill
>it with another piece of wood, dutchman style.
>
>Does anyone have any better ideas?
Best:
----
Replace the whole post.
======================================
To get by cheaply:
-----------------
Drill a couple splayed reinforcing holes (1/4"+) to fill with
Bondo, then Bondo the entire mess. Quick, cheap, won't fall out,
and sands/primes easily. The repair will outlast the post.
----------------------------------------------------------------
* Blessed are those who can * Humorous T-shirts Online
* laugh at themselves, for they * Comprehensive Website Dev.
* shall never cease to be amused * http://www.diversify.com
----------------------------------------------------------------
[email protected] wrote:
> A friend has a wooden post in her front yard with a light attached.
> There are 2 spots the size of golf balls that, I guess, rotted out and
> were filled with what looks like wood putty. She would like them
> repaired. At first I thought of using Bondo, but then I figured the
> "plug" would just fall out like the wood putty did. At this point, I'm
> thinking that the way to go is to turn the hole into a mortise and fill
> it with another piece of wood, dutchman style.
Was the rotten part removed before the original patch was made? If not,
that could be the problem - the rot continued to expand and left nothing
solid for the putty to cling to.. or.. too big a hole to fill.
Whatever the plan, I would trim back into solid wood before applying it
be it Bondo, a dutchman or combination thereof. If you attempt to use
the former, I'd also give it something to grip to besides the wood.
Maybe small nails or brads driven into the wood on an angle so that they
remain below the finished plane of the surface.
Phil,
I'm a fan of Bondo - where it makes sense and can be painted or otherwise
covered. Clean out the rotted part in the post then bore some smaller holes
about 1/4" by 1/2" deep so the Bondo can be pressed into them and make it's
own anchor points. After clearing out the old putty and drilling the holes,
swab the entire patch area with a wood hardener. I can't recall the name of
the product I've used but it's available at HD and it has the color of
orange shellac but the consistency of water. Apply enough coats so that you
notice a buildup. The initial coats (first two coats) will most likely sink
into the wood. When it no longer sinks in and is dry - you're ready for the
Bondo. This will harden any soft spots in the patch area and prevent further
deterioration of the area. The rest of the post may rot out but the patch
won't fail.
When you mix the Bondo, be sure mix a bit more than what you need. It dries
fast so if you think you need a bit more working time, reduce the hardener
by 25% to 50%. I've found thru trial and error that a 50% reduction of
hardener almost doubles the working time. Temp and humidity play a big part
in determining the working time too. Place enough Bondo in the patch area so
it's slightly proud of the post and let it cure. Then rasp or sand it down
as needed. Prime and paint.
Bob S.
<[email protected]> wrote in message
news:[email protected]...
>A friend has a wooden post in her front yard with a light attached.
> There are 2 spots the size of golf balls that, I guess, rotted out and
> were filled with what looks like wood putty. She would like them
> repaired. At first I thought of using Bondo, but then I figured the
> "plug" would just fall out like the wood putty did. At this point, I'm
> thinking that the way to go is to turn the hole into a mortise and fill
> it with another piece of wood, dutchman style.
>
> Does anyone have any better ideas?
>
> Thanks,
>
> -Phil Crow
>
I said the same thing Larry (only better....;-) read above...^^^^ at 9:46am
(6:46am left coast time)
"Larry Jaques" <novalidaddress@di\/ersify.com> wrote in message
news:[email protected]...
> On Mon, 09 May 2005 21:25:12 GMT, the inscrutable "BobS"
> <[email protected]> spake:
>
>>Now where did I hear that before..........;-) ^^^^^
>
> Uh, what'd I miss?
>
>
> ------------------------------------------------------
> I survived the D.C. Blizzard of 2000...from California.
> ----------------------------
> http://www.diversify.com Comprehensive Website Development
> --------------------------------------------------
Now where did I hear that before..........;-) ^^^^^
Bob S.
"Larry Jaques" <novalidaddress@di\/ersify.com> wrote in message
news:[email protected]...
> On 9 May 2005 05:04:30 -0700, the inscrutable
> [email protected] spake:
>
>>A friend has a wooden post in her front yard with a light attached.
>>There are 2 spots the size of golf balls that, I guess, rotted out and
>>were filled with what looks like wood putty. She would like them
>>repaired. At first I thought of using Bondo, but then I figured the
>>"plug" would just fall out like the wood putty did. At this point, I'm
>>thinking that the way to go is to turn the hole into a mortise and fill
>>it with another piece of wood, dutchman style.
>>
>>Does anyone have any better ideas?
>
> Best:
> ----
>
> Replace the whole post.
>
> ======================================
>
> To get by cheaply:
> -----------------
>
> Drill a couple splayed reinforcing holes (1/4"+) to fill with
> Bondo, then Bondo the entire mess. Quick, cheap, won't fall out,
> and sands/primes easily. The repair will outlast the post.
>
>
> ----------------------------------------------------------------
> * Blessed are those who can * Humorous T-shirts Online
> * laugh at themselves, for they * Comprehensive Website Dev.
> * shall never cease to be amused * http://www.diversify.com
> ----------------------------------------------------------------
On Mon, 09 May 2005 21:25:12 GMT, the inscrutable "BobS"
<[email protected]> spake:
>Now where did I hear that before..........;-) ^^^^^
Uh, what'd I miss?
------------------------------------------------------
I survived the D.C. Blizzard of 2000...from California.
----------------------------
http://www.diversify.com Comprehensive Website Development
--------------------------------------------------