Hello,
Would like to make some "Tommy Dorsey style" music stands for the Local High
School Jazz Band
Basically wood on 3 sides hinged with a tilted surface...easy setup and
takedown for traveling bands.
not hard but would like to get the scale correct.
I know they're shorter than most so as not to deflect sound and allow for
standing solos...
If anyone can direct me to a set of plans for reference it would be
helpful...
Thanks you in advance.
Tom Hartsell
Austin, TX
[email protected]
"Tom Hartsell" <[email protected]> wrote in message news:<[email protected]>...
> Hello,
>
> Would like to make some "Tommy Dorsey style" music stands for the Local High
> School Jazz Band
>
>Tom Here's a link that should help.
http://www.getwoodworking.com/projects/musicstand/
Rob
That is one of the neatest stands I've seen. But won't do the job for a
jazz band.
Maybe check the local musicians union. They may know some old-timers they
could put you in touch with. Did Tommy Dorsey, Charlie Barnett, Guy
Lombardo et al have roadies?
DexAZ
"rob" <[email protected]> wrote in message
news:[email protected]...
> "Tom Hartsell" <[email protected]> wrote in message
news:<[email protected]>...
> > Hello,
> >
> > Would like to make some "Tommy Dorsey style" music stands for the Local
High
> > School Jazz Band
> >
> >Tom Here's a link that should help.
>
> http://www.getwoodworking.com/projects/musicstand/
>
> Rob
I would try this at rec.music.makers.builders. If nobody there has a
plan, they may be able to point you in the right direction.
OTOH, you could just fiddle around with cardboard and duct tape or
something till you get it right. It cuts and joins easy, and it sure
is cheap.
-Phil Crow
"Tom Hartsell" <[email protected]> wrote in message news:<[email protected]>...
> Hello,
>
> Would like to make some "Tommy Dorsey style" music stands for the Local High
> School Jazz Band
>
> Basically wood on 3 sides hinged with a tilted surface...easy setup and
> takedown for traveling bands.
> not hard but would like to get the scale correct.
>
> I know they're shorter than most so as not to deflect sound and allow for
> standing solos...
>
> If anyone can direct me to a set of plans for reference it would be
> helpful...
>
> Thanks you in advance.
>
> Tom Hartsell
> Austin, TX
>
> [email protected]
Nice design, but nothing at all like what a musician in a Jazz band needs..
Bob
"rob" <[email protected]> wrote in message
news:[email protected]...
> "Tom Hartsell" <[email protected]> wrote in message
news:<[email protected]>...
> > Hello,
> >
> > Would like to make some "Tommy Dorsey style" music stands for the Local
High
> > School Jazz Band
> >
> >Tom Here's a link that should help.
>
> http://www.getwoodworking.com/projects/musicstand/
>
> Rob