Bad Tool....

"Aerobic benefit small kerf bow saw" for sale!


--------------------
"Joe AutoDrill" wrote in message news:[email protected]...

I use a bow saw for really rough cuts simply because it is so fast...

Well, I bought a new one at Loews this past weekend and had to cut a 6 x
6...

About 2" thru, the saw was binding and not stroking at all... I flipped it
to all four sides and had the same issue on every side...

Then it hit me. The daggone blade was made wrong. They forgot the kerf or
off-set blade tips to make the cut wider than the blade body... The tips
could cut just fine until the body got in there and bound up!!!

...So now I get to return the entire thing and look at the next one very
closely first.

Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Production Tapping: http://Production-Tapping-Equipment.com/
Flagship Site: http://www.Drill-N-Tap.com
VIDEOS: http://www.youtube.com/user/AutoDrill
TWITTER: http://twitter.com/AutoDrill
FACEBOOK: http://www.facebook.com/AutoDrill

V8013-R

On Mar 24, 4:47=A0pm, "Joe AutoDrill" <[email protected]> wrote:
> I use a bow saw for really rough cuts simply because it is so fast...
>
> Well, I bought a new one at Loews this past weekend and had to cut a 6 x
> 6...
>
> About 2" thru, the saw was binding and not stroking at all... =A0I flippe=
d it
> to all four sides and had the same issue on every side...
>
> Then it hit me. =A0The daggone blade was made wrong. They forgot the kerf=
or
> off-set blade tips to make the cut wider than the blade body... =A0The ti=
ps
> could cut just fine until the body got in there and bound up!!!
>
> ...So now I get to return the entire thing and look at the next one very
> closely first.

That's like the flush cut saw I bought from Lowe's - the teeth were
set in one direction only, but on both edges of the blade - in
opposite directions.
JP